netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Jon Mason <jonmason@broadcom.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Subject: [PATCH v2 4/4] arm: dts: nsp: Add USB nodes to device tree
Date: Tue, 17 Jan 2017 11:14:30 -0500	[thread overview]
Message-ID: <1484669670-4201-5-git-send-email-yendapally.reddy@broadcom.com> (raw)
In-Reply-To: <1484669670-4201-1-git-send-email-yendapally.reddy@broadcom.com>

Add USB nodes to the Northstar plus device tree file

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi   | 56 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm958625k.dts | 16 ++++++++++++
 2 files changed, 72 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b6142bd..94b3231 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -259,6 +259,34 @@
 			status = "disabled";
 		};
 
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -358,6 +386,29 @@
 					     "sata2";
 		};
 
+		mdio-mux {
+			compatible = "mdio-mux-mmioreg";
+			mdio-parent-bus = <&mdio>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+
+			mdio@0 {
+				reg = <0x00>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb-phy@10 {
+					compatible = "brcm,nsp-usb3-phy";
+					reg = <0x10>;
+					usb3-ctrl-syscon = <&usb3_ctrl>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
 		pinctrl: pinctrl@3f1c0 {
 			compatible = "brcm,nsp-pinmux";
 			reg = <0x3f1c0 0x04>,
@@ -406,6 +457,11 @@
 				phy-names = "sata-phy";
 			};
 		};
+
+		usb3_ctrl: syscon@104408 {
+			compatible = "brcm,nsp-usb3-ctrl", "syscon";
+			reg = <0x104408 0x3fc>;
+		};
 	};
 
 	pcie0: pcie@18012000 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 59d96fb..1da22dc 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -53,6 +53,22 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.1.0

  parent reply	other threads:[~2017-01-17 16:14 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-17 16:14 [PATCH v2 0/4] USB support for Broadcom NSP SoC Yendapally Reddy Dhananjaya Reddy
2017-01-17 16:14 ` [PATCH v2 1/4] dt-bindings: phy: Add documentation for NSP USB3 PHY Yendapally Reddy Dhananjaya Reddy
2017-01-19 19:26   ` Rob Herring
2017-01-17 16:14 ` [PATCH v2 2/4] net: phy: Initialize mdio clock at probe function Yendapally Reddy Dhananjaya Reddy
2017-01-19 19:26   ` Florian Fainelli
     [not found]   ` <1484669670-4201-3-git-send-email-yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-02-01 22:08     ` Florian Fainelli
2017-01-17 16:14 ` [PATCH v2 3/4] phy: Add USB3 PHY support for Broadcom NSP SoC Yendapally Reddy Dhananjaya Reddy
     [not found]   ` <1484669670-4201-4-git-send-email-yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-02-02  6:48     ` Rafał Miłecki
     [not found]       ` <6be62ef6-e90c-b5f8-adcd-0ea62ab73ced-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-03 16:05         ` Jon Mason
2017-01-17 16:14 ` Yendapally Reddy Dhananjaya Reddy [this message]
2017-01-26 15:34 ` [PATCH v2 0/4] USB " Kishon Vijay Abraham I
2017-01-26 17:27   ` Florian Fainelli
2017-01-27  7:39     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484669670-4201-5-git-send-email-yendapally.reddy@broadcom.com \
    --to=yendapally.reddy@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jonmason@broadcom.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).