netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
	Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
	Andrew Lunn <andrew@lunn.ch>
Subject: [net-next 0/8] More MV88E6390 patches
Date: Sat, 21 Jan 2017 00:30:54 +0100	[thread overview]
Message-ID: <1484955062-26718-1-git-send-email-andrew@lunn.ch> (raw)

This is the ongoing work to add support for the Marvell 9390 family of
switches. There are now two MDIO busses, one for the internal PHYs and
an external bus for external PHYs. Add support for this external bus.

This switch supports 2Gbps, 2.5Gbps and 10Gbps ports. Add phy-modes
for these speeds/interfaces. These modes are then used to configure
ports 9 and 10, which support these speeds.

The internal PHYs oddly use a Marvell Vendor ID, but have empty
product ID. Trap reads of the product ID, and if it returns 0,
instead return the switch family ID. The Marvell PHY driver is then
extended to support this ID, treating the PHY as compatible with the
1540.

Both the internal and external MDIO busses are capable of clause 45
addressing, and is required to accessing the SERDES
interfaces. Implement support for clause 45.

And two fixes are included. There is no need to port these to stable,
the current support for the 6390 is not sufficient to be usable.

Andrew Lunn (8):
  net: dsa: mv88e6xxx: Implement external MDIO bus on mv88e6390
  net: phy: Add 2000base-x, 2500base-x and rxaui modes
  net: dsa: mv88e6xxx: Fix ATU age timer for MV88E6390
  net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10
  net: dsa: mv88e6xxx: Workaround missing PHY ID on mv88e6390
  net: phy: Marvell: Add mv88e6390 internal PHY
  net: dsa: mv88e6xxx: Implement Clause 45 access to SMI devices
  net: dsa: mv88e6xxx: Fix typ0 when configuring 2.5Gbps

 .../devicetree/bindings/net/dsa/marvell.txt        |   4 +
 Documentation/devicetree/bindings/net/ethernet.txt |   3 +
 drivers/net/dsa/mv88e6xxx/chip.c                   | 168 ++++++++++++++++-----
 drivers/net/dsa/mv88e6xxx/global2.c                | 130 +++++++++++++++-
 drivers/net/dsa/mv88e6xxx/global2.h                |   4 +-
 drivers/net/dsa/mv88e6xxx/mv88e6xxx.h              |  55 +++++--
 drivers/net/dsa/mv88e6xxx/port.c                   |  66 +++++++-
 drivers/net/dsa/mv88e6xxx/port.h                   |   3 +
 drivers/net/phy/marvell.c                          |  20 +++
 include/linux/marvell_phy.h                        |   6 +
 include/linux/phy.h                                |   9 ++
 11 files changed, 409 insertions(+), 59 deletions(-)

-- 
2.11.0

             reply	other threads:[~2017-01-20 23:32 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20 23:30 Andrew Lunn [this message]
2017-01-20 23:30 ` [PATCH net-next 1/8] net: dsa: mv88e6xxx: Implement external MDIO bus on mv88e6390 Andrew Lunn
2017-01-21  0:01   ` Florian Fainelli
2017-01-21 16:07     ` Andrew Lunn
2017-01-21  0:04   ` Vivien Didelot
2017-01-21 16:15     ` Andrew Lunn
2017-01-20 23:30 ` [PATCH net-next 2/8] net: phy: Add 2000base-x, 2500base-x and rxaui modes Andrew Lunn
2017-01-21  0:07   ` Florian Fainelli
2017-01-20 23:30 ` [PATCH net-next 3/8] net: dsa: mv88e6xxx: Fix ATU age timer for MV88E6390 Andrew Lunn
2017-01-21  0:10   ` Vivien Didelot
2017-01-20 23:30 ` [PATCH net-next 4/8] net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10 Andrew Lunn
2017-01-21  0:20   ` Vivien Didelot
2017-01-20 23:30 ` [PATCH net-next 5/8] net: dsa: mv88e6xxx: Workaround missing PHY ID on mv88e6390 Andrew Lunn
2017-01-21  0:03   ` Florian Fainelli
2017-01-21  0:26   ` Vivien Didelot
2017-01-24 21:00     ` Gregory CLEMENT
2017-01-20 23:31 ` [PATCH net-next 6/8] net: phy: Marvell: Add mv88e6390 internal PHY Andrew Lunn
2017-01-21  0:04   ` Florian Fainelli
2017-01-20 23:31 ` [PATCH net-next 7/8] net: dsa: mv88e6xxx: Implement Clause 45 access to SMI devices Andrew Lunn
2017-01-20 23:31 ` [PATCH net-next 8/8] net: dsa: mv88e6xxx: Fix typ0 when configuring 2.5Gbps Andrew Lunn
2017-01-21  0:53   ` Vivien Didelot
2017-01-23 18:06 ` [net-next 0/8] More MV88E6390 patches David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484955062-26718-1-git-send-email-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).