From: Jon Mason <jon.mason@broadcom.com>
To: David Miller <davem@davemloft.net>
Cc: rafal@milecki.pl, bcm-kernel-feedback-list@broadcom.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 2/3] net: ethernet: bgmac: unify code of the same family
Date: Tue, 28 Feb 2017 13:51:00 -0500 [thread overview]
Message-ID: <1488307861-12118-3-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1488307861-12118-1-git-send-email-jon.mason@broadcom.com>
BCM471X and BCM535X are of the same family (from what I can derive from
internal documents). Group them into the case statement together, which
results in more code reuse.
Also, use existing helper variables to make the code a little more
readable too.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
drivers/net/ethernet/broadcom/bgmac-bcma.c | 64 +++++++++++++-----------------
1 file changed, 28 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c
index d59cfcc4..cf15b7e 100644
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -192,36 +192,50 @@ static int bgmac_probe(struct bcma_device *core)
goto err1;
}
- bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
- BGMAC_BFL_ENETROBO);
+ bgmac->has_robosw = !!(sprom->boardflags_lo & BGMAC_BFL_ENETROBO);
if (bgmac->has_robosw)
dev_warn(bgmac->dev, "Support for Roboswitch not implemented\n");
- if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
+ if (sprom->boardflags_lo & BGMAC_BFL_ENETADM)
dev_warn(bgmac->dev, "Support for ADMtek ethernet switch not implemented\n");
/* Feature Flags */
- switch (core->bus->chipinfo.id) {
+ switch (ci->id) {
+ /* BCM 471X/535X family */
+ case BCMA_CHIP_ID_BCM4716:
+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+ /* fallthrough */
+ case BCMA_CHIP_ID_BCM47162:
+ bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2;
+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+ break;
case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47186) {
- bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+ if (ci->pkg == BCMA_PKG_ID_BCM47188 ||
+ ci->pkg == BCMA_PKG_ID_BCM47186) {
bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
}
- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM5358)
+ if (ci->pkg == BCMA_PKG_ID_BCM5358)
bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_EPHYRMII;
break;
- case BCMA_CHIP_ID_BCM53572:
- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+ case BCMA_CHIP_ID_BCM53573:
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
- if (core->bus->chipinfo.pkg == BCMA_PKG_ID_BCM47188) {
- bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+ if (core->core_unit == 0) {
+ bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
+ bgmac->feature_flags |=
+ BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
+ } else if (core->core_unit == 1) {
+ bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
+ bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
}
break;
case BCMA_CHIP_ID_BCM4749:
@@ -229,18 +243,11 @@ static int bgmac_probe(struct bcma_device *core)
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL1;
bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_PHY;
- if (core->bus->chipinfo.pkg == 10) {
+ if (ci->pkg == 10) {
bgmac->feature_flags |= BGMAC_FEAT_SW_TYPE_RGMII;
bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
}
break;
- case BCMA_CHIP_ID_BCM4716:
- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- /* fallthrough */
- case BCMA_CHIP_ID_BCM47162:
- bgmac->feature_flags |= BGMAC_FEAT_FLW_CTRL2;
- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
- break;
/* bcm4707_family */
case BCMA_CHIP_ID_BCM4707:
case BCMA_CHIP_ID_BCM47094:
@@ -249,21 +256,6 @@ static int bgmac_probe(struct bcma_device *core)
bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
break;
- case BCMA_CHIP_ID_BCM53573:
- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
- if (ci->pkg == BCMA_PKG_ID_BCM47189)
- bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
- if (core->core_unit == 0) {
- bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
- if (ci->pkg == BCMA_PKG_ID_BCM47189)
- bgmac->feature_flags |=
- BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
- } else if (core->core_unit == 1) {
- bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
- bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
- }
- break;
default:
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
--
2.7.4
next prev parent reply other threads:[~2017-02-28 18:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 18:50 [PATCH net-next v3 0/3] net: ethernet: bgmac: PM support and clean-ups Jon Mason
2017-02-28 18:50 ` [PATCH net-next v3 1/3] net: ethernet: bgmac: use #defines for MAX size Jon Mason
2017-02-28 18:51 ` Jon Mason [this message]
2017-02-28 18:51 ` [PATCH net-next v3 3/3] net: ethernet: bgmac: driver power manangement Jon Mason
2017-03-07 1:18 ` [PATCH net-next v3 0/3] net: ethernet: bgmac: PM support and clean-ups David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488307861-12118-3-git-send-email-jon.mason@broadcom.com \
--to=jon.mason@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rafal@milecki.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).