From: Erez Shitrit <erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
valex-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
leonro-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
saedm-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
erezsh-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org,
Erez Shitrit <erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Subject: [RFC v1 for accelerated IPoIB 18/25] net/mlx5e: Export open/close api for IB link
Date: Mon, 13 Mar 2017 20:31:29 +0200 [thread overview]
Message-ID: <1489429896-10781-19-git-send-email-erezsh@mellanox.com> (raw)
In-Reply-To: <1489429896-10781-1-git-send-email-erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Now IB device is able to call open or close for its net device.
TBD:
There is one change that is waiting for the new channels api, till then
used an "if" in the code.
Signed-off-by: Erez Shitrit <erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 23 +++++++++++++++++++++--
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 13 ++++++++++++-
include/linux/mlx5/driver.h | 3 +++
4 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 2f9242ae06f3..154cab2a301b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -934,4 +934,5 @@ int mlx5e_get_offload_stats(int attr_id, const struct net_device *dev,
bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv);
bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv);
+bool mlx5e_is_eswitch_vport_mngr(struct mlx5_core_dev *mdev);
#endif /* __MLX5_EN_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index ca1867cdce48..24efc8ccc075 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2269,7 +2269,9 @@ int mlx5e_open_locked(struct mlx5e_priv *priv)
}
mlx5e_redirect_rqts(priv);
- mlx5e_update_carrier(priv);
+ /* only for the RFC, will use channels api when available */
+ if (MLX5_CAP_GEN(mdev, port_type) == MLX5_CAP_PORT_TYPE_ETH)
+ mlx5e_update_carrier(priv);
mlx5e_timestamp_init(priv);
#ifdef CONFIG_RFS_ACCEL
priv->netdev->rx_cpu_rmap = priv->mdev->rmap;
@@ -2277,7 +2279,7 @@ int mlx5e_open_locked(struct mlx5e_priv *priv)
if (priv->profile->update_stats)
queue_delayed_work(priv->wq, &priv->update_stats_work, 0);
- if (MLX5_CAP_GEN(mdev, vport_group_manager)) {
+ if (mlx5e_is_eswitch_vport_mngr(mdev)) {
err = mlx5e_add_sqs_fwd_rules(priv);
if (err)
goto err_close_channels;
@@ -3899,6 +3901,7 @@ static void mlx5i_nic_init(struct mlx5_core_dev *mdev,
struct mlx5e_priv *priv = ipoib_dev_priv(netdev);
mlx5n_build_nic_netdev_priv_common(mdev, netdev, priv, profile, ppriv);
+ priv->ppriv = NULL;
}
static int mlx5i_init_nic_rx(struct mlx5e_priv *priv)
@@ -4025,6 +4028,22 @@ void mlx5i_detach(struct mlx5_core_dev *mdev, void *vpriv)
}
EXPORT_SYMBOL(mlx5i_detach);
+int mlx5i_open(void *vpriv)
+{
+ struct mlx5e_priv *priv = vpriv;
+
+ return mlx5e_open_locked(priv);
+}
+EXPORT_SYMBOL(mlx5i_open);
+
+int mlx5i_close(void *vpriv)
+{
+ struct mlx5e_priv *priv = vpriv;
+
+ return mlx5e_close_locked(priv);
+}
+EXPORT_SYMBOL(mlx5i_close);
+
static const struct mlx5e_profile mlx5e_nic_profile = {
.init = mlx5e_nic_init,
.cleanup = mlx5e_nic_cleanup,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index 21d3d8e0bab7..cbb1092dddd4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -219,7 +219,12 @@ int mlx5e_nic_rep_load(struct mlx5_eswitch *esw, struct mlx5_eswitch_rep *rep)
void mlx5e_remove_sqs_fwd_rules(struct mlx5e_priv *priv)
{
struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
- struct mlx5_eswitch_rep *rep = priv->ppriv;
+ struct mlx5_eswitch_rep *rep;
+
+ if (!priv->ppriv)
+ return;
+
+ rep = priv->ppriv;
mlx5_eswitch_sqs2vport_stop(esw, rep);
}
@@ -323,6 +328,12 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv)
return false;
}
+bool mlx5e_is_eswitch_vport_mngr(struct mlx5_core_dev *mdev)
+{
+ return (MLX5_CAP_GEN(mdev, vport_group_manager) &&
+ MLX5_CAP_GEN(mdev, port_type) == MLX5_CAP_PORT_TYPE_ETH);
+}
+
bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv)
{
struct mlx5_eswitch_rep *rep = (struct mlx5_eswitch_rep *)priv->ppriv;
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index d0060cfb2a4f..c18be51287e7 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1139,4 +1139,7 @@ struct net_device *mlx5i_create_netdev(struct mlx5_core_dev *mdev,
struct mlx5i_create_ext_param *param);
int mlx5i_attach(struct mlx5_core_dev *mdev, void *vpriv);
void mlx5i_detach(struct mlx5_core_dev *mdev, void *vpriv);
+int mlx5i_close(void *vpriv);
+int mlx5i_open(void *vpriv);
+
#endif /* MLX5_DRIVER_H */
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-03-13 18:31 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-13 18:31 [RFC v1 for accelerated IPoIB 00/25] Enhanced mode for IPoIB driver Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 01/25] IB/ipoib: Separate control and data related initializations Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 02/25] IB/ipoib: separate control from HW operation on ipoib_open/stop ndo Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 03/25] IB/ipoib: Rename qpn to dqpn in ipoib_send and post_send functions Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 04/25] IB/verb: Add ipoib_options struct and API Erez Shitrit
[not found] ` <1489429896-10781-5-git-send-email-erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-03-13 20:01 ` Jason Gunthorpe
2017-03-14 7:01 ` Vishwanathapura, Niranjana
2017-03-14 13:25 ` Erez Shitrit
2017-03-14 16:11 ` Jason Gunthorpe
[not found] ` <20170314161149.GA15752-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-03-15 6:30 ` Leon Romanovsky
[not found] ` <20170315063043.GC2079-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-03-15 16:40 ` Vishwanathapura, Niranjana
2017-03-16 15:17 ` Erez Shitrit
2017-03-16 16:04 ` Jason Gunthorpe
2017-03-14 6:44 ` Vishwanathapura, Niranjana
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 05/25] IB/ipoib: Support ipoib acceleration options callbacks Erez Shitrit
2017-03-13 20:10 ` Jason Gunthorpe
[not found] ` <1489429896-10781-6-git-send-email-erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-03-14 6:35 ` Vishwanathapura, Niranjana
[not found] ` <20170314063538.GB79937-wPcXA7LoDC+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2017-03-14 14:42 ` Erez Shitrit
2017-03-14 16:00 ` Jason Gunthorpe
[not found] ` <20170314160021.GD3244-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-03-15 6:47 ` Leon Romanovsky
2017-03-15 15:58 ` Jason Gunthorpe
[not found] ` <20170315155802.GB29562-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-03-15 17:39 ` Leon Romanovsky
2017-03-14 15:44 ` Jason Gunthorpe
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 06/25] hw/mlx5: Add New bit to check over QP creation Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 07/25] linux/mlx5/mlx5_ifc.h: Add underlay_qpn field to PRM objects Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 08/25] net/mlx5e: Refactor EN code to support IB link Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 10/25] net/mlx5e: Support netdevice creation for IB link type Erez Shitrit
[not found] ` <1489429896-10781-1-git-send-email-erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 09/25] net/mlx5e: Creating and Destroying flow-steering tables for IB link Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 11/25] net/mlx5e: Refactor attach_netdev API Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 12/25] net/mlx5e: Use underlay_qpn in tis creation Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 13/25] net/mlx5e: Export resource creation function to be used in IB link Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 17/25] net/mlx5e: Change mlx5e_open_locked and mlx5e_close_locked api Erez Shitrit
2017-03-13 18:31 ` Erez Shitrit [this message]
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 19/25] include/linux/mlx5: Add mlx5_wqe_eth_pad and enhanced-ipoib-qp-mode Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 20/25] net/mlx5e: Refactor TX send flow Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 22/25] net/mlx5e: New function pointer for build_rx_skb is Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 23/25] net/mlx5e: Change the function that checks the packet type Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 14/25] net/mlx5: Enable flow-steering for IB link Erez Shitrit
2017-03-15 18:56 ` Leon Romanovsky
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 15/25] net/mlx5e: Enhanced flow table creation to support ETH and IB links Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 16/25] net/mlx5e: Change cleanup API in order to enable IB link Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 21/25] net/mlx5e: Export send function for IB link type Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 24/25] net/mlx5e: Add support for build_rx_skb for packet from IB type Erez Shitrit
2017-03-13 18:31 ` [RFC v1 for accelerated IPoIB 25/25] mlx5_ib: skeleton for mlx5_ib to support ipoib_ops Erez Shitrit
[not found] ` <1489429896-10781-26-git-send-email-erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-03-13 20:27 ` Jason Gunthorpe
[not found] ` <20170313202720.GC2738-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-03-14 14:53 ` Erez Shitrit
2017-03-14 16:10 ` Jason Gunthorpe
2017-03-14 16:37 ` Erez Shitrit
2017-03-14 6:07 ` Vishwanathapura, Niranjana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489429896-10781-19-git-send-email-erezsh@mellanox.com \
--to=erezsh-vpraknaxozvwk0htik3j/w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=erezsh-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org \
--cc=leonro-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=saedm-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=valex-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).