[PATCH net-next 0/5] bnxt_en: Updates for net-next.

[PATCH net-next 0/5] bnxt_en: Updates for net-next.

[Michael Chan]

Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware,
checking one more new firmware flag before allowing DCBX to run on the host,
adding 100Gbps speed support, adding check to disallow speed settings on
Multi-host NICs, and a minor fix for reporting VF attributes.

Deepak Khungar (2):
  bnxt_en: Add 100G link speed reporting for BCM57454 ASIC in ethtool
  bnxt_en: Restrict a PF in Multi-Host mode from changing port PHY
    configuration

Michael Chan (3):
  bnxt_en: Pass DCB RoCE app priority to firmware.
  bnxt_en: Fix VF attributes reporting.
  bnxt_en: Check the FW_LLDP_AGENT flag before allowing DCBX host agent.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c         |  17 +++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         |   2 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c     | 108 +++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h     |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  14 ++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c   |   8 +-
 6 files changed, 140 insertions(+), 10 deletions(-)

-- 
1.8.3.1

[PATCH net-next 1/5] bnxt_en: Pass DCB RoCE app priority to firmware.

[Michael Chan]

When the driver gets the RoCE app priority set/delete call through DCBNL,
the driver will send the information to the firmware to set up the
priority VLAN tag for RDMA traffic.

[ New version using the common ETH_P_IBOE constant in if_ether.h ]

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 108 +++++++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h |   1 +
 2 files changed, 108 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c
index 03532061..46de2f8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c
@@ -1,6 +1,7 @@
 /* Broadcom NetXtreme-C/E network driver.
  *
  * Copyright (c) 2014-2016 Broadcom Corporation
+ * Copyright (c) 2016-2017 Broadcom Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/etherdevice.h>
+#include <rdma/ib_verbs.h>
 #include "bnxt_hsi.h"
 #include "bnxt.h"
 #include "bnxt_dcb.h"
@@ -241,6 +243,92 @@ static int bnxt_hwrm_queue_pfc_qcfg(struct bnxt *bp, struct ieee_pfc *pfc)
 	return 0;
 }
 
+static int bnxt_hwrm_set_dcbx_app(struct bnxt *bp, struct dcb_app *app,
+				  bool add)
+{
+	struct hwrm_fw_set_structured_data_input set = {0};
+	struct hwrm_fw_get_structured_data_input get = {0};
+	struct hwrm_struct_data_dcbx_app *fw_app;
+	struct hwrm_struct_hdr *data;
+	dma_addr_t mapping;
+	size_t data_len;
+	int rc, n, i;
+
+	if (bp->hwrm_spec_code < 0x10601)
+		return 0;
+
+	n = IEEE_8021QAZ_MAX_TCS;
+	data_len = sizeof(*data) + sizeof(*fw_app) * n;
+	data = dma_alloc_coherent(&bp->pdev->dev, data_len, &mapping,
+				  GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memset(data, 0, data_len);
+	bnxt_hwrm_cmd_hdr_init(bp, &get, HWRM_FW_GET_STRUCTURED_DATA, -1, -1);
+	get.dest_data_addr = cpu_to_le64(mapping);
+	get.structure_id = cpu_to_le16(STRUCT_HDR_STRUCT_ID_DCBX_APP);
+	get.subtype = cpu_to_le16(HWRM_STRUCT_DATA_SUBTYPE_HOST_OPERATIONAL);
+	get.count = 0;
+	rc = hwrm_send_message(bp, &get, sizeof(get), HWRM_CMD_TIMEOUT);
+	if (rc)
+		goto set_app_exit;
+
+	fw_app = (struct hwrm_struct_data_dcbx_app *)(data + 1);
+
+	if (data->struct_id != cpu_to_le16(STRUCT_HDR_STRUCT_ID_DCBX_APP)) {
+		rc = -ENODEV;
+		goto set_app_exit;
+	}
+
+	n = data->count;
+	for (i = 0; i < n; i++, fw_app++) {
+		if (fw_app->protocol_id == cpu_to_be16(app->protocol) &&
+		    fw_app->protocol_selector == app->selector &&
+		    fw_app->priority == app->priority) {
+			if (add)
+				goto set_app_exit;
+			else
+				break;
+		}
+	}
+	if (add) {
+		/* append */
+		n++;
+		fw_app->protocol_id = cpu_to_be16(app->protocol);
+		fw_app->protocol_selector = app->selector;
+		fw_app->priority = app->priority;
+		fw_app->valid = 1;
+	} else {
+		size_t len = 0;
+
+		/* not found, nothing to delete */
+		if (n == i)
+			goto set_app_exit;
+
+		len = (n - 1 - i) * sizeof(*fw_app);
+		if (len)
+			memmove(fw_app, fw_app + 1, len);
+		n--;
+		memset(fw_app + n, 0, sizeof(*fw_app));
+	}
+	data->count = n;
+	data->len = cpu_to_le16(sizeof(*fw_app) * n);
+	data->subtype = cpu_to_le16(HWRM_STRUCT_DATA_SUBTYPE_HOST_OPERATIONAL);
+
+	bnxt_hwrm_cmd_hdr_init(bp, &set, HWRM_FW_SET_STRUCTURED_DATA, -1, -1);
+	set.src_data_addr = cpu_to_le64(mapping);
+	set.data_len = cpu_to_le16(sizeof(*data) + sizeof(*fw_app) * n);
+	set.hdr_cnt = 1;
+	rc = hwrm_send_message(bp, &set, sizeof(set), HWRM_CMD_TIMEOUT);
+	if (rc)
+		rc = -EIO;
+
+set_app_exit:
+	dma_free_coherent(&bp->pdev->dev, data_len, data, mapping);
+	return rc;
+}
+
 static int bnxt_ets_validate(struct bnxt *bp, struct ieee_ets *ets, u8 *tc)
 {
 	int total_ets_bw = 0;
@@ -417,6 +505,15 @@ static int bnxt_dcbnl_ieee_setapp(struct net_device *dev, struct dcb_app *app)
 		return -EINVAL;
 
 	rc = dcb_ieee_setapp(dev, app);
+	if (rc)
+		return rc;
+
+	if ((app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	     app->protocol == ETH_P_IBOE) ||
+	    (app->selector == IEEE_8021QAZ_APP_SEL_DGRAM &&
+	     app->protocol == ROCE_V2_UDP_DPORT))
+		rc = bnxt_hwrm_set_dcbx_app(bp, app, true);
+
 	return rc;
 }
 
@@ -425,10 +522,19 @@ static int bnxt_dcbnl_ieee_delapp(struct net_device *dev, struct dcb_app *app)
 	struct bnxt *bp = netdev_priv(dev);
 	int rc;
 
-	if (!(bp->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+	if (!(bp->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) ||
+	    !(bp->dcbx_cap & DCB_CAP_DCBX_HOST))
 		return -EINVAL;
 
 	rc = dcb_ieee_delapp(dev, app);
+	if (rc)
+		return rc;
+	if ((app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	     app->protocol == ETH_P_IBOE) ||
+	    (app->selector == IEEE_8021QAZ_APP_SEL_DGRAM &&
+	     app->protocol == ROCE_V2_UDP_DPORT))
+		rc = bnxt_hwrm_set_dcbx_app(bp, app, false);
+
 	return rc;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h
index 35a0d28..ecd0a5e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h
@@ -1,6 +1,7 @@
 /* Broadcom NetXtreme-C/E network driver.
  *
  * Copyright (c) 2014-2016 Broadcom Corporation
+ * Copyright (c) 2016-2017 Broadcom Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
-- 
1.8.3.1

[PATCH net-next 2/5] bnxt_en: Fix VF attributes reporting.

[Michael Chan]

The .ndo_get_vf_config() is returning the wrong qos attribute.  Fix
the code that checks and reports the qos and spoofchk attributes.  The
BNXT_VF_QOS and BNXT_VF_LINK_UP flags should not be set by default
during init. time.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index f893531..b8e7248 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -138,8 +138,11 @@ int bnxt_get_vf_config(struct net_device *dev, int vf_id,
 	ivi->max_tx_rate = vf->max_tx_rate;
 	ivi->min_tx_rate = vf->min_tx_rate;
 	ivi->vlan = vf->vlan;
-	ivi->qos = vf->flags & BNXT_VF_QOS;
-	ivi->spoofchk = vf->flags & BNXT_VF_SPOOFCHK;
+	if (vf->flags & BNXT_VF_QOS)
+		ivi->qos = vf->vlan >> VLAN_PRIO_SHIFT;
+	else
+		ivi->qos = 0;
+	ivi->spoofchk = !!(vf->flags & BNXT_VF_SPOOFCHK);
 	if (!(vf->flags & BNXT_VF_LINK_FORCED))
 		ivi->linkstate = IFLA_VF_LINK_STATE_AUTO;
 	else if (vf->flags & BNXT_VF_LINK_UP)
@@ -304,7 +307,6 @@ static int bnxt_set_vf_attr(struct bnxt *bp, int num_vfs)
 	for (i = 0; i < num_vfs; i++) {
 		vf = &bp->pf.vf[i];
 		memset(vf, 0, sizeof(*vf));
-		vf->flags = BNXT_VF_QOS | BNXT_VF_LINK_UP;
 	}
 	return 0;
 }
-- 
1.8.3.1

[PATCH net-next 3/5] bnxt_en: Add 100G link speed reporting for BCM57454 ASIC in ethtool

[Michael Chan]

From: Deepak Khungar <deepak.khungar@broadcom.com>

Added support for 100G link speed reporting for Broadcom BCM57454
ASIC in ethtool command.

Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c         |  5 +++--
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         |  2 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 14 +++++++++++++-
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 129b810..447ee3d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5471,7 +5471,8 @@ static void bnxt_report_link(struct bnxt *bp)
 	if (bp->link_info.link_up) {
 		const char *duplex;
 		const char *flow_ctrl;
-		u16 speed, fec;
+		u32 speed;
+		u16 fec;
 
 		netif_carrier_on(bp->dev);
 		if (bp->link_info.duplex == BNXT_LINK_DUPLEX_FULL)
@@ -5487,7 +5488,7 @@ static void bnxt_report_link(struct bnxt *bp)
 		else
 			flow_ctrl = "none";
 		speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
-		netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
+		netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s duplex, Flow control: %s\n",
 			    speed, duplex, flow_ctrl);
 		if (bp->flags & BNXT_FLAG_EEE_CAP)
 			netdev_info(bp->dev, "EEE is %s\n",
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index c9a1688..25fef61 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -851,6 +851,7 @@ struct bnxt_link_info {
 #define BNXT_LINK_SPEED_25GB	PORT_PHY_QCFG_RESP_LINK_SPEED_25GB
 #define BNXT_LINK_SPEED_40GB	PORT_PHY_QCFG_RESP_LINK_SPEED_40GB
 #define BNXT_LINK_SPEED_50GB	PORT_PHY_QCFG_RESP_LINK_SPEED_50GB
+#define BNXT_LINK_SPEED_100GB	PORT_PHY_QCFG_RESP_LINK_SPEED_100GB
 	u16			support_speeds;
 	u16			auto_link_speeds;	/* fw adv setting */
 #define BNXT_LINK_SPEED_MSK_100MB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_100MB
@@ -862,6 +863,7 @@ struct bnxt_link_info {
 #define BNXT_LINK_SPEED_MSK_25GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_25GB
 #define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
 #define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
+#define BNXT_LINK_SPEED_MSK_100GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_100GB
 	u16			support_auto_speeds;
 	u16			lp_auto_link_speeds;
 	u16			force_link_speed;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 848ecf2..11ddf0a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -929,6 +929,9 @@ u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
 	if ((fw_speeds) & BNXT_LINK_SPEED_MSK_50GB)			\
 		ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
 						     50000baseCR2_Full);\
+	if ((fw_speeds) & BNXT_LINK_SPEED_MSK_100GB)			\
+		ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
+						     100000baseCR4_Full);\
 	if ((fw_pause) & BNXT_LINK_PAUSE_RX) {				\
 		ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
 						     Pause);		\
@@ -965,6 +968,9 @@ u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
 	if (ethtool_link_ksettings_test_link_mode(lk_ksettings, name,	\
 						  50000baseCR2_Full))	\
 		(fw_speeds) |= BNXT_LINK_SPEED_MSK_50GB;		\
+	if (ethtool_link_ksettings_test_link_mode(lk_ksettings, name,	\
+						  100000baseCR4_Full))	\
+		(fw_speeds) |= BNXT_LINK_SPEED_MSK_100GB;		\
 }
 
 static void bnxt_fw_to_ethtool_advertised_spds(struct bnxt_link_info *link_info,
@@ -1027,6 +1033,8 @@ u32 bnxt_fw_to_ethtool_speed(u16 fw_link_speed)
 		return SPEED_40000;
 	case BNXT_LINK_SPEED_50GB:
 		return SPEED_50000;
+	case BNXT_LINK_SPEED_100GB:
+		return SPEED_100000;
 	default:
 		return SPEED_UNKNOWN;
 	}
@@ -1092,7 +1100,7 @@ static int bnxt_get_link_ksettings(struct net_device *dev,
 	return 0;
 }
 
-static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
+static u32 bnxt_get_fw_speed(struct net_device *dev, u32 ethtool_speed)
 {
 	struct bnxt *bp = netdev_priv(dev);
 	struct bnxt_link_info *link_info = &bp->link_info;
@@ -1132,6 +1140,10 @@ static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
 		if (support_spds & BNXT_LINK_SPEED_MSK_50GB)
 			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
 		break;
+	case SPEED_100000:
+		if (support_spds & BNXT_LINK_SPEED_MSK_100GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100GB;
+		break;
 	default:
 		netdev_err(dev, "unsupported speed!\n");
 		break;
-- 
1.8.3.1

[PATCH net-next 4/5] bnxt_en: Check the FW_LLDP_AGENT flag before allowing DCBX host agent.

[Michael Chan]

Check the additional flag in bnxt_hwrm_func_qcfg() before allowing
DCBX to be done in host mode.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 447ee3d..9130628 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4483,7 +4483,8 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp)
 	}
 #endif
 	if (BNXT_PF(bp) && (le16_to_cpu(resp->flags) &
-			    FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED))
+			    (FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED |
+			     FUNC_QCFG_RESP_FLAGS_FW_LLDP_AGENT_ENABLED)))
 		bp->flags |= BNXT_FLAG_FW_LLDP_AGENT;
 
 	switch (resp->port_partition_type) {
-- 
1.8.3.1

[PATCH net-next 5/5] bnxt_en: Restrict a PF in Multi-Host mode from changing port PHY configuration

[Michael Chan]

From: Deepak Khungar <deepak.khungar@broadcom.com>

This change restricts the PF in multi-host mode from setting any port
level PHY configuration.  The settings are controlled by firmware in
Multi-Host mode.

Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++++----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  4 +++-
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 9130628..b3ba660 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4482,10 +4482,15 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp)
 		vf->vlan = le16_to_cpu(resp->vlan) & VLAN_VID_MASK;
 	}
 #endif
-	if (BNXT_PF(bp) && (le16_to_cpu(resp->flags) &
-			    (FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED |
-			     FUNC_QCFG_RESP_FLAGS_FW_LLDP_AGENT_ENABLED)))
-		bp->flags |= BNXT_FLAG_FW_LLDP_AGENT;
+	if (BNXT_PF(bp)) {
+		u16 flags = le16_to_cpu(resp->flags);
+
+		if (flags & (FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED |
+			     FUNC_QCFG_RESP_FLAGS_FW_LLDP_AGENT_ENABLED))
+			bp->flags |= BNXT_FLAG_FW_LLDP_AGENT;
+		if (flags & FUNC_QCFG_RESP_FLAGS_MULTI_HOST)
+			bp->flags |= BNXT_FLAG_MULTI_HOST;
+	}
 
 	switch (resp->port_partition_type) {
 	case FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_0:
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 25fef61..3ef42db 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1005,6 +1005,7 @@ struct bnxt {
 	#define BNXT_FLAG_NO_AGG_RINGS	0x20000
 	#define BNXT_FLAG_RX_PAGE_MODE	0x40000
 	#define BNXT_FLAG_FW_LLDP_AGENT	0x80000
+	#define BNXT_FLAG_MULTI_HOST	0x100000
 	#define BNXT_FLAG_CHIP_NITRO_A0	0x1000000
 
 	#define BNXT_FLAG_ALL_CONFIG_FEATS (BNXT_FLAG_TPA |		\
@@ -1014,7 +1015,8 @@ struct bnxt {
 #define BNXT_PF(bp)		(!((bp)->flags & BNXT_FLAG_VF))
 #define BNXT_VF(bp)		((bp)->flags & BNXT_FLAG_VF)
 #define BNXT_NPAR(bp)		((bp)->port_partition_type)
-#define BNXT_SINGLE_PF(bp)	(BNXT_PF(bp) && !BNXT_NPAR(bp))
+#define BNXT_MH(bp)		((bp)->flags & BNXT_FLAG_MULTI_HOST)
+#define BNXT_SINGLE_PF(bp)	(BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp))
 #define BNXT_CHIP_TYPE_NITRO_A0(bp) ((bp)->flags & BNXT_FLAG_CHIP_NITRO_A0)
 #define BNXT_RX_PAGE_MODE(bp)	((bp)->flags & BNXT_FLAG_RX_PAGE_MODE)
 
-- 
1.8.3.1

Re: [PATCH net-next 0/5] bnxt_en: Updates for net-next.

[David Miller]

From: Michael Chan <michael.chan@broadcom.com>
Date: Fri, 21 Apr 2017 20:11:21 -0400

> Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware,
> checking one more new firmware flag before allowing DCBX to run on the host,
> adding 100Gbps speed support, adding check to disallow speed settings on
> Multi-host NICs, and a minor fix for reporting VF attributes.

Series applied, thanks.

[PATCH net-next 0/5] bnxt_en: Updates for net-next

[Michael Chan]

The first patch is the FW interface update, followed by 3 patches to
support the expanded pcie v2 structure for ethtool -d.  The last patch
adds a Hyper-V PCI ID for the 5760X chips (Thor2).

Michael Chan (1):
  bnxt_en: hsi: Update FW interface to 1.10.3.133

Pavan Chebbi (1):
  bnxt_en: Add Hyper-V VF ID

Shruti Parab (3):
  bnxt_en: Refactor bnxt_get_regs()
  bnxt_en: Add pcie_stat_len to struct bp
  bnxt_en: Add pcie_ctx_v2 support for ethtool -d

 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |   5 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |   2 +
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  84 +++--
 include/linux/bnxt/hsi.h                      | 315 ++++++++++++++----
 4 files changed, 317 insertions(+), 89 deletions(-)

-- 
2.30.1