From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
netdev <netdev@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCHv2 net-next 4/5] net: dsa: mv88e6xxx: mv88e6390X SERDES support
Date: Tue, 23 May 2017 23:04:45 +0200 [thread overview]
Message-ID: <1495573486-31827-5-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1495573486-31827-1-git-send-email-andrew@lunn.ch>
The mv88e6390X family has 8 SERDES lanes. These can be used for 2
10Gbps ports, ports 9 or 10. If these ports are used at slower speeds,
the SERDES lanes become available for other ports for 1000Base-X.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/chip.c | 6 ++
drivers/net/dsa/mv88e6xxx/serdes.c | 154 +++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/serdes.h | 24 ++++++
3 files changed, 184 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index b029d01a0a5f..fc4d93b5c59f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2757,6 +2757,7 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6190x_ops = {
@@ -2789,6 +2790,7 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6191_ops = {
@@ -2821,6 +2823,7 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6240_ops = {
@@ -2888,6 +2891,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6320_ops = {
@@ -3113,6 +3117,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6390x_ops = {
@@ -3147,6 +3152,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
+ .serdes_power = mv88e6390_serdes_power,
};
static const struct mv88e6xxx_info mv88e6xxx_table[] = {
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 235f5f0c30ae..53795676bd70 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -13,6 +13,7 @@
#include <linux/mii.h>
+#include "global2.h"
#include "mv88e6xxx.h"
#include "phy.h"
#include "port.h"
@@ -73,3 +74,156 @@ int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
return 0;
}
+
+/* Set the power on/off for 10GBASE-R and 10GBASE-X4/X2 */
+static int mv88e6390_serdes_10g(struct mv88e6xxx_chip *chip, int addr, bool on)
+{
+ u16 val, new_val;
+ int reg_c45;
+ int err;
+
+ reg_c45 = MII_ADDR_C45 | MV88E6390_SERDES_DEVICE |
+ MV88E6390_PCS_CONTROL_1;
+ err = mv88e6xxx_phy_read(chip, addr, reg_c45, &val);
+ if (err)
+ return err;
+
+ if (on)
+ new_val = val & ~(MV88E6390_PCS_CONTROL_1_RESET |
+ MV88E6390_PCS_CONTROL_1_LOOPBACK |
+ MV88E6390_PCS_CONTROL_1_PDOWN);
+ else
+ new_val = val | MV88E6390_PCS_CONTROL_1_PDOWN;
+
+ if (val != new_val)
+ err = mv88e6xxx_phy_write(chip, addr, reg_c45, new_val);
+
+ return err;
+}
+
+/* Set the power on/off for 10GBASE-R and 10GBASE-X4/X2 */
+static int mv88e6390_serdes_sgmii(struct mv88e6xxx_chip *chip, int addr,
+ bool on)
+{
+ u16 val, new_val;
+ int reg_c45;
+ int err;
+
+ reg_c45 = MII_ADDR_C45 | MV88E6390_SERDES_DEVICE |
+ MV88E6390_SGMII_CONTROL;
+ err = mv88e6xxx_phy_read(chip, addr, reg_c45, &val);
+ if (err)
+ return err;
+
+ if (on)
+ new_val = val & ~(MV88E6390_SGMII_CONTROL_RESET |
+ MV88E6390_SGMII_CONTROL_LOOPBACK |
+ MV88E6390_SGMII_CONTROL_PDOWN);
+ else
+ new_val = val | MV88E6390_SGMII_CONTROL_PDOWN;
+
+ if (val != new_val)
+ err = mv88e6xxx_phy_write(chip, addr, reg_c45, new_val);
+
+ return err;
+}
+
+static int mv88e6390_serdes_lower(struct mv88e6xxx_chip *chip, u8 cmode,
+ int port_donor, int lane, bool rxaui, bool on)
+{
+ int err;
+ u8 cmode_donor;
+
+ err = mv88e6xxx_port_get_cmode(chip, port_donor, &cmode_donor);
+ if (err)
+ return err;
+
+ switch (cmode_donor) {
+ case PORT_STATUS_CMODE_RXAUI:
+ if (!rxaui)
+ break;
+ /* Fall through */
+ case PORT_STATUS_CMODE_1000BASE_X:
+ case PORT_STATUS_CMODE_SGMII:
+ case PORT_STATUS_CMODE_2500BASEX:
+ if (cmode == PORT_STATUS_CMODE_1000BASE_X ||
+ cmode == PORT_STATUS_CMODE_SGMII)
+ return mv88e6390_serdes_sgmii(chip, lane, on);
+ }
+ return 0;
+}
+
+static int mv88e6390_serdes_port9(struct mv88e6xxx_chip *chip, u8 cmode,
+ bool on)
+{
+ switch (cmode) {
+ case PORT_STATUS_CMODE_1000BASE_X:
+ case PORT_STATUS_CMODE_SGMII:
+ return mv88e6390_serdes_sgmii(chip, MV88E6390_PORT9_LANE0, on);
+ case PORT_STATUS_CMODE_XAUI:
+ case PORT_STATUS_CMODE_RXAUI:
+ case PORT_STATUS_CMODE_2500BASEX:
+ return mv88e6390_serdes_10g(chip, MV88E6390_PORT9_LANE0, on);
+ }
+
+ return 0;
+}
+
+static int mv88e6390_serdes_port10(struct mv88e6xxx_chip *chip, u8 cmode,
+ bool on)
+{
+ switch (cmode) {
+ case PORT_STATUS_CMODE_SGMII:
+ return mv88e6390_serdes_sgmii(chip, MV88E6390_PORT10_LANE0, on);
+ case PORT_STATUS_CMODE_XAUI:
+ case PORT_STATUS_CMODE_RXAUI:
+ case PORT_STATUS_CMODE_1000BASE_X:
+ case PORT_STATUS_CMODE_2500BASEX:
+ return mv88e6390_serdes_10g(chip, MV88E6390_PORT10_LANE0, on);
+ }
+
+ return 0;
+}
+
+int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
+{
+ u8 cmode;
+ int err;
+
+ err = mv88e6xxx_port_get_cmode(chip, port, &cmode);
+ if (err)
+ return cmode;
+
+ switch (port) {
+ case 2:
+ return mv88e6390_serdes_lower(chip, cmode, 9,
+ MV88E6390_PORT9_LANE1,
+ false, on);
+ case 3:
+ return mv88e6390_serdes_lower(chip, cmode, 9,
+ MV88E6390_PORT9_LANE2,
+ true, on);
+ case 4:
+ return mv88e6390_serdes_lower(chip, cmode, 9,
+ MV88E6390_PORT9_LANE3,
+ true, on);
+ case 5:
+ return mv88e6390_serdes_lower(chip, cmode, 10,
+ MV88E6390_PORT10_LANE1,
+ false, on);
+ case 6:
+ return mv88e6390_serdes_lower(chip, cmode, 10,
+ MV88E6390_PORT10_LANE2,
+ true, on);
+ case 7:
+ return mv88e6390_serdes_lower(chip, cmode, 10,
+ MV88E6390_PORT10_LANE3,
+ true, on);
+ case 9:
+ return mv88e6390_serdes_port9(chip, cmode, on);
+ case 10:
+ return mv88e6390_serdes_port10(chip, cmode, on);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index a690be09ac52..eb3ceaef790f 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -19,6 +19,30 @@
#define MV88E6352_ADDR_SERDES 0x0f
#define MV88E6352_SERDES_PAGE_FIBER 0x01
+#define MV88E6390_PORT9_LANE0 0x09
+#define MV88E6390_PORT9_LANE1 0x12
+#define MV88E6390_PORT9_LANE2 0x13
+#define MV88E6390_PORT9_LANE3 0x14
+#define MV88E6390_PORT10_LANE0 0x0a
+#define MV88E6390_PORT10_LANE1 0x15
+#define MV88E6390_PORT10_LANE2 0x16
+#define MV88E6390_PORT10_LANE3 0x17
+#define MV88E6390_SERDES_DEVICE (4 << 16)
+
+/* 10GBASE-R and 10GBASE-X4/X2 */
+#define MV88E6390_PCS_CONTROL_1 0x1000
+#define MV88E6390_PCS_CONTROL_1_RESET BIT(15)
+#define MV88E6390_PCS_CONTROL_1_LOOPBACK BIT(14)
+#define MV88E6390_PCS_CONTROL_1_SPEED BIT(13)
+#define MV88E6390_PCS_CONTROL_1_PDOWN BIT(11)
+
+/* 1000BASE-X and SGMII */
+#define MV88E6390_SGMII_CONTROL 0x2000
+#define MV88E6390_SGMII_CONTROL_RESET BIT(15)
+#define MV88E6390_SGMII_CONTROL_LOOPBACK BIT(14)
+#define MV88E6390_SGMII_CONTROL_PDOWN BIT(11)
+
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
+int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
#endif
--
2.11.0
next prev parent reply other threads:[~2017-05-23 21:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 21:04 [PATCHv2 net-next 0/5] net: dsa: mv88e6xxx: Add basic SERDES support Andrew Lunn
2017-05-23 21:04 ` [PATCHv2 net-next 1/5] net: dsa: mv88e6xxx: Move phy functions into phy.[ch] Andrew Lunn
2017-05-24 15:31 ` Vivien Didelot
2017-05-25 16:35 ` David Miller
2017-05-23 21:04 ` [PATCHv2 net-next 2/5] net: dsa: mv88e6xxx: Refactor mv88e6352 SERDES code into an op Andrew Lunn
2017-05-24 15:03 ` Vivien Didelot
2017-05-23 21:04 ` [PATCHv2 net-next 3/5] net: dsa: mv88e6xxx: Remove SERDES flag Andrew Lunn
2017-05-24 14:59 ` Vivien Didelot
2017-05-23 21:04 ` Andrew Lunn [this message]
2017-05-24 14:59 ` [PATCHv2 net-next 4/5] net: dsa: mv88e6xxx: mv88e6390X SERDES support Vivien Didelot
2017-05-23 21:04 ` [PATCHv2 net-next 5/5] dsa: mv88e6xxx: Enable/Disable SERDES on port enable/disable Andrew Lunn
2017-05-24 14:58 ` Vivien Didelot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495573486-31827-5-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).