From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: Woojung Huh <Woojung.Huh@microchip.com>,
netdev <netdev@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCHv2 net-next] net: phy: smsc: Implement PHY statistics
Date: Sat, 3 Jun 2017 20:00:36 +0200 [thread overview]
Message-ID: <1496512836-22198-1-git-send-email-andrew@lunn.ch> (raw)
Most of the PHYs supported by the SMSC driver have a counter of symbol
errors. This is 16 bit wide and wraps around when it reaches its
maximum value.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-By: Woojung Huh <Woojung.Huh@microchip.com>
---
v2:
Align members
Add Reviewed-by's
---
drivers/net/phy/smsc.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 67c9f2b26c8e..1b8204be064c 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -25,6 +25,16 @@
#include <linux/netdevice.h>
#include <linux/smscphy.h>
+struct smsc_hw_stat {
+ const char *string;
+ u8 reg;
+ u8 bits;
+};
+
+static struct smsc_hw_stat smsc_hw_stats[] = {
+ { "phy_symbol_errors", 26, 16},
+};
+
struct smsc_phy_priv {
bool energy_enable;
};
@@ -143,6 +153,48 @@ static int lan87xx_read_status(struct phy_device *phydev)
return err;
}
+static int smsc_get_sset_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(smsc_hw_stats);
+}
+
+static void smsc_get_strings(struct phy_device *phydev, u8 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ smsc_hw_stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+#ifndef UINT64_MAX
+#define UINT64_MAX (u64)(~((u64)0))
+#endif
+static u64 smsc_get_stat(struct phy_device *phydev, int i)
+{
+ struct smsc_hw_stat stat = smsc_hw_stats[i];
+ int val;
+ u64 ret;
+
+ val = phy_read(phydev, stat.reg);
+ if (val < 0)
+ ret = UINT64_MAX;
+ else
+ ret = val;
+
+ return ret;
+}
+
+static void smsc_get_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
+ data[i] = smsc_get_stat(phydev, i);
+}
+
static int smsc_phy_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -206,6 +258,11 @@ static struct phy_driver smsc_phy_driver[] = {
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ /* Statistics */
+ .get_sset_count = smsc_get_sset_count,
+ .get_strings = smsc_get_strings,
+ .get_stats = smsc_get_stats,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -228,6 +285,11 @@ static struct phy_driver smsc_phy_driver[] = {
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ /* Statistics */
+ .get_sset_count = smsc_get_sset_count,
+ .get_strings = smsc_get_strings,
+ .get_stats = smsc_get_stats,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -271,6 +333,11 @@ static struct phy_driver smsc_phy_driver[] = {
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ /* Statistics */
+ .get_sset_count = smsc_get_sset_count,
+ .get_strings = smsc_get_strings,
+ .get_stats = smsc_get_stats,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -293,6 +360,11 @@ static struct phy_driver smsc_phy_driver[] = {
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ /* Statistics */
+ .get_sset_count = smsc_get_sset_count,
+ .get_strings = smsc_get_strings,
+ .get_stats = smsc_get_stats,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
--
2.11.0
next reply other threads:[~2017-06-03 18:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-03 18:00 Andrew Lunn [this message]
2017-06-05 1:36 ` [PATCHv2 net-next] net: phy: smsc: Implement PHY statistics David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496512836-22198-1-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=Woojung.Huh@microchip.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).