netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Timur Tabi <timur@codeaurora.org>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: timur@codeaurora.org
Subject: [PATCH 3/3] net: qcom/emac: add support for emulation systems
Date: Fri, 23 Jun 2017 14:33:30 -0500	[thread overview]
Message-ID: <1498246410-29794-4-git-send-email-timur@codeaurora.org> (raw)
In-Reply-To: <1498246410-29794-1-git-send-email-timur@codeaurora.org>

On emulation systems, the EMAC's internal PHY ("SGMII") is not present,
but is not needed for network functionality.  So just display a warning
message and ignore the SGMII.

Tested-by: Philip Elcan <pelcan@codeaurora.org>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
---
 drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
index 18c184e..29ba37a 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
@@ -297,6 +297,14 @@ static int emac_sgmii_acpi_match(struct device *dev, void *data)
 	{}
 };
 
+/* Dummy function for systems without an internal PHY. This avoids having
+ * to check for NULL pointers before calling the functions.
+ */
+static int emac_sgmii_dummy(struct emac_adapter *adpt)
+{
+	return 0;
+}
+
 int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
 {
 	struct platform_device *sgmii_pdev = NULL;
@@ -311,8 +319,19 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
 					emac_sgmii_acpi_match);
 
 		if (!dev) {
-			dev_err(&pdev->dev, "cannot find internal phy node\n");
-			return -ENODEV;
+			dev_warn(&pdev->dev, "cannot find internal phy node\n");
+			/* There is typically no internal PHY on emulation
+			 * systems, so if we can't find the node, assume
+			 * we are on an emulation system and stub-out
+			 * support for the internal PHY.  These systems only
+			 * use ACPI.
+			 */
+			phy->open = emac_sgmii_dummy;
+			phy->close = emac_sgmii_dummy;
+			phy->link_up = emac_sgmii_dummy;
+			phy->link_down = emac_sgmii_dummy;
+
+			return 0;
 		}
 
 		sgmii_pdev = to_platform_device(dev);
-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2017-06-23 19:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-23 19:33 [PATCH 0/3][v2] net: qcom/emac: various minor improvements Timur Tabi
2017-06-23 19:33 ` [PATCH 1/3] net: qcom/emac: add shutdown function Timur Tabi
2017-06-23 19:33 ` [PATCH 2/3][v2] net: qcom/emac: do not reset the EMAC during initialization Timur Tabi
2017-06-23 19:33 ` Timur Tabi [this message]
2017-06-25 15:44 ` [PATCH 0/3][v2] net: qcom/emac: various minor improvements David Miller
  -- strict thread matches above, loose matches on Subject: below --
2017-06-22 18:05 [PATCH 0/3] " Timur Tabi
2017-06-22 18:05 ` [PATCH 3/3] net: qcom/emac: add support for emulation systems Timur Tabi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1498246410-29794-4-git-send-email-timur@codeaurora.org \
    --to=timur@codeaurora.org \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).