From: "Jianming.qiao" <jqiaoulk@gmail.com>
To: f.fainelli@gmail.com, netdev@vger.kernel.org
Subject: [PATCH v2 net-next] net: systemport: Support 64bit statistics
Date: Wed, 19 Jul 2017 01:18:40 +0100 [thread overview]
Message-ID: <1500423520-4169-1-git-send-email-jqiaoulk@gmail.com> (raw)
Signed-off-by: Jianming.qiao <kiki-good@hotmail.com>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 52 +++++++++++++++++++++++++++---
drivers/net/ethernet/broadcom/bcmsysport.h | 9 ++++--
2 files changed, 55 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 5274501..56f8951 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -662,6 +662,7 @@ static int bcm_sysport_alloc_rx_bufs(struct bcm_sysport_priv *priv)
static unsigned int bcm_sysport_desc_rx(struct bcm_sysport_priv *priv,
unsigned int budget)
{
+ struct bcm_sysport_stats *stats64 = &priv->stats64;
struct net_device *ndev = priv->netdev;
unsigned int processed = 0, to_process;
struct bcm_sysport_cb *cb;
@@ -765,6 +766,10 @@ static unsigned int bcm_sysport_desc_rx(struct bcm_sysport_priv *priv,
skb->protocol = eth_type_trans(skb, ndev);
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += len;
+ u64_stats_update_begin(&stats64->syncp);
+ stats64->rx_packets++;
+ stats64->rx_bytes += len;
+ u64_stats_update_end(&stats64->syncp);
napi_gro_receive(&priv->napi, skb);
next:
@@ -784,24 +789,31 @@ static void bcm_sysport_tx_reclaim_one(struct bcm_sysport_tx_ring *ring,
unsigned int *pkts_compl)
{
struct bcm_sysport_priv *priv = ring->priv;
+ struct bcm_sysport_stats *stats64 = &priv->stats64;
struct device *kdev = &priv->pdev->dev;
+ unsigned int len = 0;
if (cb->skb) {
- ring->bytes += cb->skb->len;
- *bytes_compl += cb->skb->len;
+ len = cb->skb->len;
+ *bytes_compl += len;
dma_unmap_single(kdev, dma_unmap_addr(cb, dma_addr),
dma_unmap_len(cb, dma_len),
DMA_TO_DEVICE);
- ring->packets++;
(*pkts_compl)++;
bcm_sysport_free_cb(cb);
/* SKB fragment */
} else if (dma_unmap_addr(cb, dma_addr)) {
- ring->bytes += dma_unmap_len(cb, dma_len);
+ len = dma_unmap_len(cb, dma_len);
dma_unmap_page(kdev, dma_unmap_addr(cb, dma_addr),
dma_unmap_len(cb, dma_len), DMA_TO_DEVICE);
dma_unmap_addr_set(cb, dma_addr, 0);
}
+
+ u64_stats_update_begin(&stats64->syncp);
+ ring->bytes += len;
+ if (cb->skb)
+ ring->packets++;
+ u64_stats_update_end(&stats64->syncp);
}
/* Reclaim queued SKBs for transmission completion, lockless version */
@@ -1923,6 +1935,37 @@ static int bcm_sysport_stop(struct net_device *dev)
return 0;
}
+static void bcm_sysport_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct bcm_sysport_priv *priv = netdev_priv(dev);
+ struct bcm_sysport_stats *stats64 = &priv->stats64;
+ struct bcm_sysport_tx_ring *ring;
+ u64 tx_packets = 0, tx_bytes = 0;
+ unsigned int start;
+ unsigned int q;
+
+ netdev_stats_to_stats64(stats, &dev->stats);
+
+ for (q = 0; q < dev->num_tx_queues; q++) {
+ ring = &priv->tx_rings[q];
+ do {
+ start = u64_stats_fetch_begin_irq(&stats64->syncp);
+ tx_bytes += ring->bytes;
+ tx_packets += ring->packets;
+ } while (u64_stats_fetch_retry_irq(&stats64->syncp, start));
+ }
+
+ stats->tx_packets = tx_packets;
+ stats->tx_bytes = tx_bytes;
+
+ do {
+ start = u64_stats_fetch_begin_irq(&stats64->syncp);
+ stats->rx_packets = stats64->rx_packets;
+ stats->rx_bytes = stats64->rx_bytes;
+ } while (u64_stats_fetch_retry_irq(&stats64->syncp, start));
+}
+
static const struct ethtool_ops bcm_sysport_ethtool_ops = {
.get_drvinfo = bcm_sysport_get_drvinfo,
.get_msglevel = bcm_sysport_get_msglvl,
@@ -1951,6 +1994,7 @@ static int bcm_sysport_stop(struct net_device *dev)
.ndo_poll_controller = bcm_sysport_poll_controller,
#endif
.ndo_get_stats = bcm_sysport_get_nstats,
+ .ndo_get_stats64 = bcm_sysport_get_stats64,
};
#define REV_FMT "v%2x.%02x"
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 77a51c1..c03a176 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -657,6 +657,9 @@ struct bcm_sysport_stats {
enum bcm_sysport_stat_type type;
/* reg offset from UMAC base for misc counters */
u16 reg_offset;
+ u64 rx_packets;
+ u64 rx_bytes;
+ struct u64_stats_sync syncp;
};
/* Software house keeping helper structure */
@@ -693,8 +696,8 @@ struct bcm_sysport_tx_ring {
struct bcm_sysport_cb *cbs; /* Transmit control blocks */
struct dma_desc *desc_cpu; /* CPU view of the descriptor */
struct bcm_sysport_priv *priv; /* private context backpointer */
- unsigned long packets; /* packets statistics */
- unsigned long bytes; /* bytes statistics */
+ u64 packets; /* packets statistics */
+ u64 bytes; /* bytes statistics */
};
/* Driver private structure */
@@ -743,5 +746,7 @@ struct bcm_sysport_priv {
/* Ethtool */
u32 msg_enable;
+ /* 64bit stats on 32bit/64bit Machine */
+ struct bcm_sysport_stats stats64;
};
#endif /* __BCM_SYSPORT_H */
--
1.9.1
next reply other threads:[~2017-07-19 0:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-19 0:18 Jianming.qiao [this message]
2017-07-20 5:25 ` [PATCH v2 net-next] net: systemport: Support 64bit statistics David Miller
2017-07-20 10:13 ` kiki good
2017-07-20 15:28 ` Florian Fainelli
2017-07-20 15:44 ` Stephen Hemminger
2017-07-20 21:59 ` kiki good
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500423520-4169-1-git-send-email-jqiaoulk@gmail.com \
--to=jqiaoulk@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).