From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net-next 2/7] net: phy: marvell: Use core genphy_soft_reset()
Date: Sun, 30 Jul 2017 22:41:45 +0200 [thread overview]
Message-ID: <1501447310-24101-3-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1501447310-24101-1-git-send-email-andrew@lunn.ch>
Rather than using an open coded equivalent, use the core
genphy_soft_reset() function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/phy/marvell.c | 47 ++++++++++++-----------------------------------
1 file changed, 12 insertions(+), 35 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 6a5256ceb11e..33a52532fac6 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -292,17 +292,11 @@ static int marvell_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
- int bmcr;
-
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
- bmcr = phy_read(phydev, MII_BMCR);
- if (bmcr < 0)
- return bmcr;
-
- err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@@ -318,8 +312,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -354,7 +347,7 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
@@ -370,17 +363,11 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
- int bmcr;
-
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
- bmcr = phy_read(phydev, MII_BMCR);
- if (bmcr < 0)
- return bmcr;
-
- err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@@ -493,7 +480,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
marvell_set_page(phydev, oldpage);
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -656,9 +643,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
int temp;
int err;
- temp = phy_read(phydev, MII_BMCR);
- temp |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, temp);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -689,14 +674,10 @@ static int m88e1116r_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- temp = phy_read(phydev, MII_BMCR);
- temp |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, temp);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
- mdelay(500);
-
return marvell_config_init(phydev);
}
@@ -804,14 +785,10 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
return err;
/* soft reset */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
- do
- temp = phy_read(phydev, MII_BMCR);
- while (temp & BMCR_RESET);
-
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
@@ -850,7 +827,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1121_config_init(struct phy_device *phydev)
@@ -912,7 +889,7 @@ static int m88e1118_config_aneg(struct phy_device *phydev)
{
int err;
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@@ -961,7 +938,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1149_config_init(struct phy_device *phydev)
@@ -987,7 +964,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return phy_write(phydev, MII_BMCR, BMCR_RESET);
+ return genphy_soft_reset(phydev);
}
static int m88e1145_config_init_rgmii(struct phy_device *phydev)
--
2.13.2
next prev parent reply other threads:[~2017-07-30 20:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-30 20:41 [PATCH net-next 0/7] More Marvell PHY refactoring and cleanup Andrew Lunn
2017-07-30 20:41 ` [PATCH net-next 1/7] net: phy: marvell: tabification Andrew Lunn
2017-07-30 20:41 ` Andrew Lunn [this message]
2017-07-30 20:41 ` [PATCH net-next 3/7] net: phy: marvell: consolidate RGMII delay code Andrew Lunn
2017-07-30 20:41 ` [PATCH net-next 4/7] net: phy: marvell: Consolidate setting the phy-mode Andrew Lunn
2017-07-30 20:41 ` [PATCH net-next 5/7] net: phy: marvell: Refactor m88e1121 RGMII delay configuration Andrew Lunn
2017-07-30 20:41 ` [PATCH net-next 6/7] net: phy: marvell: Use the set_polarity helper Andrew Lunn
2017-07-30 20:41 ` [PATCH net-next 7/7] net: phy: marvell: Refactor setting downshift into a helper Andrew Lunn
2017-08-01 1:01 ` [PATCH net-next 0/7] More Marvell PHY refactoring and cleanup David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501447310-24101-3-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).