[RFC net-next 2/8] net: dsa: tag_brcm: Set output queue from skb queue mapping

[Florian Fainelli <f.fainelli@gmail.com>]

We originally used skb->priority but that was not quite correct as this
bitfield needs to contain the egress switch queue we intend to send this
SKB to.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 net/dsa/tag_brcm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index de74c3f77818..dbb016434ace 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -62,6 +62,7 @@
 static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct dsa_slave_priv *p = netdev_priv(dev);
+	u16 queue = skb_get_queue_mapping(skb);
 	u8 *brcm_tag;
 
 	if (skb_cow_head(skb, BRCM_TAG_LEN) < 0)
@@ -78,7 +79,7 @@ static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev
 	 * deprecated
 	 */
 	brcm_tag[0] = (1 << BRCM_OPCODE_SHIFT) |
-			((skb->priority << BRCM_IG_TC_SHIFT) & BRCM_IG_TC_MASK);
+		       ((queue & BRCM_IG_TC_MASK) << BRCM_IG_TC_SHIFT);
 	brcm_tag[1] = 0;
 	brcm_tag[2] = 0;
 	if (p->dp->index == 8)
-- 
1.9.1