From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, jhs@mojatatu.com, davem@davemloft.net,
xiyou.wangcong@gmail.com, andrew@lunn.ch,
vivien.didelot@savoirfairelinux.com,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [RFC net-next 5/8] net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
Date: Wed, 30 Aug 2017 17:18:49 -0700 [thread overview]
Message-ID: <1504138732-65383-6-git-send-email-f.fainelli@gmail.com> (raw)
In-Reply-To: <1504138732-65383-1-git-send-email-f.fainelli@gmail.com>
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.
Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 4 ++++
drivers/net/dsa/bcm_sf2.h | 1 +
drivers/net/dsa/bcm_sf2_cfp.c | 8 ++++----
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index fc9f9f171e55..af299fe343cc 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1043,6 +1043,7 @@ struct bcm_sf2_of_data {
u32 type;
const u16 *reg_offsets;
unsigned int core_reg_align;
+ unsigned int num_cfp_rules;
};
/* Register offsets for the SWITCH_REG_* block */
@@ -1066,6 +1067,7 @@ struct bcm_sf2_of_data {
.type = BCM7445_DEVICE_ID,
.core_reg_align = 0,
.reg_offsets = bcm_sf2_7445_reg_offsets,
+ .num_cfp_rules = 256,
};
static const u16 bcm_sf2_7278_reg_offsets[] = {
@@ -1088,6 +1090,7 @@ struct bcm_sf2_of_data {
.type = BCM7278_DEVICE_ID,
.core_reg_align = 1,
.reg_offsets = bcm_sf2_7278_reg_offsets,
+ .num_cfp_rules = 128,
};
static const struct of_device_id bcm_sf2_of_match[] = {
@@ -1144,6 +1147,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
priv->type = data->type;
priv->reg_offsets = data->reg_offsets;
priv->core_reg_align = data->core_reg_align;
+ priv->num_cfp_rules = data->num_cfp_rules;
/* Auto-detection using standard registers will not work, so
* provide an indication of what kind of device we are for
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index d9c96b281fc0..02c499f9c56b 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -72,6 +72,7 @@ struct bcm_sf2_priv {
u32 type;
const u16 *reg_offsets;
unsigned int core_reg_align;
+ unsigned int num_cfp_rules;
/* spinlock protecting access to the indirect registers */
spinlock_t indir_lock;
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 2fb32d67065f..8a1da7e67707 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -98,7 +98,7 @@ static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
{
u32 reg;
- WARN_ON(addr >= CFP_NUM_RULES);
+ WARN_ON(addr >= priv->num_cfp_rules);
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
@@ -109,7 +109,7 @@ static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
{
/* Entry #0 is reserved */
- return CFP_NUM_RULES - 1;
+ return priv->num_cfp_rules - 1;
}
static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
@@ -523,7 +523,7 @@ static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
if (!(reg & OP_STR_DONE))
break;
- } while (index < CFP_NUM_RULES);
+ } while (index < priv->num_cfp_rules);
/* Put the TCAM size here */
nfc->data = bcm_sf2_cfp_rule_size(priv);
@@ -544,7 +544,7 @@ int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
case ETHTOOL_GRXCLSRLCNT:
/* Subtract the default, unusable rule */
nfc->rule_cnt = bitmap_weight(priv->cfp.used,
- CFP_NUM_RULES) - 1;
+ priv->num_cfp_rules) - 1;
/* We support specifying rule locations */
nfc->data |= RX_CLS_LOC_SPECIAL;
break;
--
1.9.1
next prev parent reply other threads:[~2017-08-31 0:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-31 0:18 [RFC net-next 0/8] net: dsa: Multi-queue awareness Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 1/8] net: dsa: Allow switch drivers to indicate number of RX/TX queues Florian Fainelli
2017-08-31 23:44 ` Andrew Lunn
2017-09-01 4:00 ` Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 2/8] net: dsa: tag_brcm: Set output queue from skb queue mapping Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 3/8] net: dsa: bcm_sf2: Advertise number of egress queues Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 4/8] net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping Florian Fainelli
2017-08-31 0:18 ` Florian Fainelli [this message]
2017-08-31 0:18 ` [RFC net-next 6/8] net: dsa: Expose dsa_slave_dev_check and dsa_slave_dev_port_num Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 7/8] net: dsa: tag_brcm: Indicate to master netdevice port + queue Florian Fainelli
2017-08-31 0:18 ` [RFC net-next 8/8] net: systemport: Establish DSA network device queue mapping Florian Fainelli
2017-09-01 0:05 ` [RFC net-next 0/8] net: dsa: Multi-queue awareness Andrew Lunn
2017-09-01 4:10 ` Florian Fainelli
2017-09-01 13:29 ` Andrew Lunn
2017-09-01 16:46 ` Florian Fainelli
2017-09-01 17:55 ` Andrew Lunn
2017-09-01 18:27 ` Florian Fainelli
2017-09-01 18:50 ` Andrew Lunn
2017-09-01 19:21 ` Florian Fainelli
2017-09-01 19:44 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504138732-65383-6-git-send-email-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).