From: Yunsheng Lin <linyunsheng@huawei.com>
To: <davem@davemloft.net>
Cc: <huangdaode@hisilicon.com>, <xuwei5@hisilicon.com>,
<liguozhu@hisilicon.com>, <Yisen.Zhuang@huawei.com>,
<gabriele.paoloni@huawei.com>, <john.garry@huawei.com>,
<linuxarm@huawei.com>, <yisen.zhuang@huawei.com>,
<salil.mehta@huawei.com>, <lipeng321@huawei.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH net-next 10/10] net: hns3: Add mqprio support when interacting with network stack
Date: Thu, 21 Sep 2017 19:21:53 +0800 [thread overview]
Message-ID: <1505992913-107256-11-git-send-email-linyunsheng@huawei.com> (raw)
In-Reply-To: <1505992913-107256-1-git-send-email-linyunsheng@huawei.com>
When using tc qdisc to configure DCB parameter, dcb_ops->setup_tc
is used to tell hclge_dcb module to do the setup.
When using lldptool to configure DCB parameter, hclge_dcb module
call the client_ops->setup_tc to tell network stack which queue
and priority is using for specific tc.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 135 +++++++++++++++++----
1 file changed, 111 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
index 11dab26..31fcda4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -196,6 +196,32 @@ static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector)
tqp_vector->tx_group.flow_level = HNS3_FLOW_LOW;
}
+static int hns3_nic_set_real_num_queue(struct net_device *netdev)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = priv->ae_handle;
+ struct hnae3_knic_private_info *kinfo = &h->kinfo;
+ unsigned int queue_size = kinfo->rss_size * kinfo->num_tc;
+ int ret;
+
+ ret = netif_set_real_num_tx_queues(netdev, queue_size);
+ if (ret) {
+ netdev_err(netdev,
+ "netif_set_real_num_tx_queues fail, ret=%d!\n",
+ ret);
+ return ret;
+ }
+
+ ret = netif_set_real_num_rx_queues(netdev, queue_size);
+ if (ret) {
+ netdev_err(netdev,
+ "netif_set_real_num_rx_queues fail, ret=%d!\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int hns3_nic_net_up(struct net_device *netdev)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
@@ -232,26 +258,13 @@ static int hns3_nic_net_up(struct net_device *netdev)
static int hns3_nic_net_open(struct net_device *netdev)
{
- struct hns3_nic_priv *priv = netdev_priv(netdev);
- struct hnae3_handle *h = priv->ae_handle;
int ret;
netif_carrier_off(netdev);
- ret = netif_set_real_num_tx_queues(netdev, h->kinfo.num_tqps);
- if (ret) {
- netdev_err(netdev,
- "netif_set_real_num_tx_queues fail, ret=%d!\n",
- ret);
- return ret;
- }
-
- ret = netif_set_real_num_rx_queues(netdev, h->kinfo.num_tqps);
- if (ret) {
- netdev_err(netdev,
- "netif_set_real_num_rx_queues fail, ret=%d!\n", ret);
+ ret = hns3_nic_set_real_num_queue(netdev);
+ if (ret)
return ret;
- }
ret = hns3_nic_net_up(netdev);
if (ret) {
@@ -1193,32 +1206,40 @@ static void hns3_nic_udp_tunnel_del(struct net_device *netdev,
}
}
-static int hns3_setup_tc(struct net_device *netdev, u8 tc)
+static int hns3_setup_tc(struct net_device *netdev, u8 tc, u8 *prio_tc)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
struct hnae3_handle *h = priv->ae_handle;
struct hnae3_knic_private_info *kinfo = &h->kinfo;
+ bool if_running = netif_running(netdev);
unsigned int i;
int ret;
if (tc > HNAE3_MAX_TC)
return -EINVAL;
- if (kinfo->num_tc == tc)
- return 0;
-
if (!netdev)
return -EINVAL;
- if (!tc) {
+ if (if_running) {
+ (void)hns3_nic_net_stop(netdev);
+ msleep(100);
+ }
+
+ ret = (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
+ kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
+ if (ret)
+ goto err_out;
+
+ if (tc <= 1) {
netdev_reset_tc(netdev);
- return 0;
+ goto out;
}
/* Set num_tc for netdev */
ret = netdev_set_num_tc(netdev, tc);
if (ret)
- return ret;
+ goto err_out;
/* Set per TC queues for the VSI */
for (i = 0; i < HNAE3_MAX_TC; i++) {
@@ -1229,7 +1250,14 @@ static int hns3_setup_tc(struct net_device *netdev, u8 tc)
kinfo->tc_info[i].tqp_offset);
}
- return 0;
+out:
+ ret = hns3_nic_set_real_num_queue(netdev);
+
+err_out:
+ if (if_running)
+ (void)hns3_nic_net_open(netdev);
+
+ return ret;
}
static int hns3_nic_setup_tc(struct net_device *dev, enum tc_setup_type type,
@@ -1240,7 +1268,7 @@ static int hns3_nic_setup_tc(struct net_device *dev, enum tc_setup_type type,
if (type != TC_SETUP_MQPRIO)
return -EOPNOTSUPP;
- return hns3_setup_tc(dev, mqprio->num_tc);
+ return hns3_setup_tc(dev, mqprio->num_tc, mqprio->prio_tc_map);
}
static int hns3_vlan_rx_add_vid(struct net_device *netdev,
@@ -2848,10 +2876,69 @@ static void hns3_link_status_change(struct hnae3_handle *handle, bool linkup)
}
}
+static int hns3_client_setup_tc(struct hnae3_handle *handle, u8 tc)
+{
+ struct hnae3_knic_private_info *kinfo = &handle->kinfo;
+ struct net_device *ndev = kinfo->netdev;
+ bool if_running = netif_running(ndev);
+ int ret;
+ u8 i;
+
+ if (tc > HNAE3_MAX_TC)
+ return -EINVAL;
+
+ if (!ndev)
+ return -ENODEV;
+
+ ret = netdev_set_num_tc(ndev, tc);
+ if (ret)
+ return ret;
+
+ if (if_running) {
+ (void)hns3_nic_net_stop(ndev);
+ msleep(100);
+ }
+
+ ret = (kinfo->dcb_ops && kinfo->dcb_ops->map_update) ?
+ kinfo->dcb_ops->map_update(handle) : -EOPNOTSUPP;
+ if (ret)
+ goto err_out;
+
+ if (tc <= 1) {
+ netdev_reset_tc(ndev);
+ goto out;
+ }
+
+ for (i = 0; i < HNAE3_MAX_TC; i++) {
+ struct hnae3_tc_info *tc_info = &kinfo->tc_info[i];
+
+ if (tc_info->enable)
+ netdev_set_tc_queue(ndev,
+ tc_info->tc,
+ tc_info->tqp_count,
+ tc_info->tqp_offset);
+ }
+
+ for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
+ netdev_set_prio_tc_map(ndev, i,
+ kinfo->prio_tc[i]);
+ }
+
+out:
+ ret = hns3_nic_set_real_num_queue(ndev);
+
+err_out:
+ if (if_running)
+ (void)hns3_nic_net_open(ndev);
+
+ return ret;
+}
+
const struct hnae3_client_ops client_ops = {
.init_instance = hns3_client_init,
.uninit_instance = hns3_client_uninit,
.link_status_change = hns3_link_status_change,
+ .setup_tc = hns3_client_setup_tc,
};
/* hns3_init_module - Driver registration routine
--
1.9.1
next prev parent reply other threads:[~2017-09-21 11:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-21 11:21 [PATCH net-next 00/10] Add support for DCB feature in hns3 driver Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 01/10] net: hns3: Support for dynamically assigning tx buffer to TC Yunsheng Lin
2017-09-22 1:41 ` David Miller
2017-09-22 1:57 ` Yunsheng Lin
2017-09-22 3:43 ` David Miller
2017-09-21 11:21 ` [PATCH net-next 02/10] net: hns3: Add support for dynamically buffer reallocation Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 03/10] net: hns3: Add support for PFC setting in TM module Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 04/10] net: hns3: Add support for port shaper " Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 05/10] net: hns3: Add tc-based TM support for sriov enabled port Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 06/10] net: hns3: Add some interface for the support of DCB feature Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 07/10] net: hns3: Add hclge_dcb module " Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 08/10] net: hns3: Add dcb netlink interface " Yunsheng Lin
2017-09-21 11:21 ` [PATCH net-next 09/10] net: hns3: Setting for fc_mode and dcb enable flag in TM module Yunsheng Lin
2017-09-21 11:21 ` Yunsheng Lin [this message]
2017-09-22 12:55 ` [PATCH net-next 10/10] net: hns3: Add mqprio support when interacting with network stack Jiri Pirko
[not found] ` <59c51a37.a1c4df0a.ac4e2.8df0SMTPIN_ADDED_BROKEN@mx.google.com>
2017-09-22 16:03 ` Jiri Pirko
2017-09-23 0:47 ` Yunsheng Lin
2017-09-24 11:37 ` Jiri Pirko
2017-09-25 0:45 ` Yunsheng Lin
2017-09-25 6:57 ` Jiri Pirko
2017-09-25 7:22 ` Yunsheng Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1505992913-107256-11-git-send-email-linyunsheng@huawei.com \
--to=linyunsheng@huawei.com \
--cc=Yisen.Zhuang@huawei.com \
--cc=davem@davemloft.net \
--cc=gabriele.paoloni@huawei.com \
--cc=huangdaode@hisilicon.com \
--cc=john.garry@huawei.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).