From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: j.vosburgh@gmail.com, vfalico@gmail.com, andy@greyhouse.net,
jiri@mellanox.com, idosch@mellanox.com, davem@davemloft.net,
bridge@lists.linux-foundation.org,
David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 7/7] mlxsw: spectrum: Add extack messages for enslave failures
Date: Tue, 3 Oct 2017 21:58:54 -0700 [thread overview]
Message-ID: <1507093134-20406-8-git-send-email-dsahern@gmail.com> (raw)
In-Reply-To: <1507093134-20406-1-git-send-email-dsahern@gmail.com>
mlxsw fails device enslavement for a number of reasons. Use the extack
facility to return an error message to the user stating why the enslave
is failing.
Messages are prefixed with "spectrum" so users know it is a constraint
imposed by the hardware driver. For example:
$ ip li add br0.11 link br0 type vlan id 11
$ ip li set swp11 master br0
Error: spectrum: Enslaving a port to a device that already has an upper device is not supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 46 ++++++++++++++++++++------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 3adf237c951a..a6cc00e4e543 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -4019,14 +4019,20 @@ static int mlxsw_sp_lag_index_get(struct mlxsw_sp *mlxsw_sp,
static bool
mlxsw_sp_master_lag_check(struct mlxsw_sp *mlxsw_sp,
struct net_device *lag_dev,
- struct netdev_lag_upper_info *lag_upper_info)
+ struct netdev_lag_upper_info *lag_upper_info,
+ struct netlink_ext_ack *extack)
{
u16 lag_id;
- if (mlxsw_sp_lag_index_get(mlxsw_sp, lag_dev, &lag_id) != 0)
+ if (mlxsw_sp_lag_index_get(mlxsw_sp, lag_dev, &lag_id) != 0) {
+ NL_SET_ERR_MSG(extack, "spectrum: Unknown LAG device");
return false;
- if (lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH)
+ }
+ if (lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: LAG device using unsupported Tx type");
return false;
+ }
return true;
}
@@ -4231,6 +4237,7 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
{
struct netdev_notifier_changeupper_info *info;
struct mlxsw_sp_port *mlxsw_sp_port;
+ struct netlink_ext_ack *extack;
struct net_device *upper_dev;
struct mlxsw_sp *mlxsw_sp;
int err = 0;
@@ -4238,6 +4245,7 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
mlxsw_sp_port = netdev_priv(dev);
mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
info = ptr;
+ extack = netdev_notifier_info_to_extack(&info->info);
switch (event) {
case NETDEV_PRECHANGEUPPER:
@@ -4245,25 +4253,43 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
if (!is_vlan_dev(upper_dev) &&
!netif_is_lag_master(upper_dev) &&
!netif_is_bridge_master(upper_dev) &&
- !netif_is_ovs_master(upper_dev))
+ !netif_is_ovs_master(upper_dev)) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Unknown upper device type");
return -EINVAL;
+ }
if (!info->linking)
break;
- if (netdev_has_any_upper_dev(upper_dev))
+ if (netdev_has_any_upper_dev(upper_dev)) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Enslaving a port to a device that already has an upper device is not supported");
return -EINVAL;
+ }
if (netif_is_lag_master(upper_dev) &&
!mlxsw_sp_master_lag_check(mlxsw_sp, upper_dev,
- info->upper_info))
+ info->upper_info, extack))
return -EINVAL;
- if (netif_is_lag_master(upper_dev) && vlan_uses_dev(dev))
+ if (netif_is_lag_master(upper_dev) && vlan_uses_dev(dev)) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Master device is a LAG master and this device has a VLAN");
return -EINVAL;
+ }
if (netif_is_lag_port(dev) && is_vlan_dev(upper_dev) &&
- !netif_is_lag_master(vlan_dev_real_dev(upper_dev)))
+ !netif_is_lag_master(vlan_dev_real_dev(upper_dev))) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Can not put a VLAN on a LAG port");
return -EINVAL;
- if (netif_is_ovs_master(upper_dev) && vlan_uses_dev(dev))
+ }
+ if (netif_is_ovs_master(upper_dev) && vlan_uses_dev(dev)) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Master device is an OVS master and this device has a VLAN");
return -EINVAL;
- if (netif_is_ovs_port(dev) && is_vlan_dev(upper_dev))
+ }
+ if (netif_is_ovs_port(dev) && is_vlan_dev(upper_dev)) {
+ NL_SET_ERR_MSG(extack,
+ "spectrum: Can not put a VLAN on an OVS port");
return -EINVAL;
+ }
break;
case NETDEV_CHANGEUPPER:
upper_dev = info->upper_dev;
--
2.1.4
next prev parent reply other threads:[~2017-10-04 4:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 4:58 [PATCH net-next 0/7] net: Plumb extack error reporting to enslavements David Ahern
2017-10-04 4:58 ` [PATCH net-next 1/7] net: Add extack to netdev_notifier_info David Ahern
2017-10-04 4:58 ` [PATCH net-next 2/7] net: Add extack to ndo_add_slave David Ahern
2017-10-04 4:58 ` [PATCH net-next 3/7] net: Add extack to upper device linking David Ahern
2017-10-04 4:58 ` [PATCH net-next 4/7] net: vrf: Add extack messages for enslave errors David Ahern
2017-10-04 4:58 ` [PATCH net-next 5/7] net: bonding: Add extack messages for some enslave failures David Ahern
2017-10-04 6:38 ` Jiri Pirko
2017-10-04 15:35 ` David Ahern
2017-10-04 18:04 ` Jiri Pirko
2017-10-04 18:06 ` David Ahern
2017-10-04 18:39 ` Jiri Pirko
2017-10-04 4:58 ` [PATCH net-next 6/7] net: bridge: Pass extack to down to netdev_master_upper_dev_link David Ahern
2017-10-04 15:13 ` Stephen Hemminger
2017-10-04 16:16 ` David Ahern
2017-10-04 4:58 ` David Ahern [this message]
2017-10-04 13:24 ` [PATCH net-next 7/7] mlxsw: spectrum: Add extack messages for enslave failures Ido Schimmel
2017-10-04 15:44 ` David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507093134-20406-8-git-send-email-dsahern@gmail.com \
--to=dsahern@gmail.com \
--cc=andy@greyhouse.net \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=idosch@mellanox.com \
--cc=j.vosburgh@gmail.com \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=vfalico@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).