From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Subject: [PATCH net-next v2 4/7] net: qualcomm: rmnet: Remove duplicate setting of rmnet private info
Date: Wed, 11 Oct 2017 18:43:55 -0600 [thread overview]
Message-ID: <1507769038-30231-5-git-send-email-subashab@codeaurora.org> (raw)
In-Reply-To: <1507769038-30231-1-git-send-email-subashab@codeaurora.org>
The end point is set twice in the local_ep as well as the mux_id and
the real_dev in the rmnet private structure. Remove the local_ep.
While these elements are equivalent, rmnet_endpoint will be
used only as part of the rmnet_port for muxed scenarios in VND mode.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 10 ++--------
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h | 4 ----
drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c | 18 ++++++++++--------
drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.h | 3 +--
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 19 ++-----------------
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h | 1 -
6 files changed, 15 insertions(+), 40 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index 85fce9c..96058bb 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -67,13 +67,8 @@ static int rmnet_is_real_dev_registered(const struct net_device *real_dev)
struct rmnet_endpoint *ep;
struct rmnet_port *port;
- if (!rmnet_is_real_dev_registered(dev)) {
- ep = rmnet_vnd_get_endpoint(dev);
- } else {
- port = rmnet_get_port_rtnl(dev);
-
- ep = &port->muxed_ep[config_id];
- }
+ port = rmnet_get_port_rtnl(dev);
+ ep = &port->muxed_ep[config_id];
return ep;
}
@@ -183,7 +178,6 @@ static int rmnet_newlink(struct net *src_net, struct net_device *dev,
port->rmnet_mode = mode;
rmnet_set_endpoint_config(real_dev, mux_id, dev);
- rmnet_set_endpoint_config(dev, mux_id, real_dev);
return 0;
err2:
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
index 03d473f..c5f5c6d 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
@@ -20,9 +20,6 @@
#define RMNET_MAX_LOGICAL_EP 255
-/* Information about the next device to deliver the packet to.
- * Exact usage of this parameter depends on the rmnet_mode.
- */
struct rmnet_endpoint {
u8 mux_id;
struct net_device *egress_dev;
@@ -44,7 +41,6 @@ struct rmnet_port {
extern struct rtnl_link_ops rmnet_link_ops;
struct rmnet_priv {
- struct rmnet_endpoint local_ep;
u8 mux_id;
struct net_device *real_dev;
};
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
index 86e37cc..e0802d3 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
@@ -116,8 +116,7 @@ static void rmnet_set_skb_proto(struct sk_buff *skb)
}
static int rmnet_map_egress_handler(struct sk_buff *skb,
- struct rmnet_port *port,
- struct rmnet_endpoint *ep,
+ struct rmnet_port *port, u8 mux_id,
struct net_device *orig_dev)
{
int required_headroom, additional_header_len;
@@ -136,10 +135,10 @@ static int rmnet_map_egress_handler(struct sk_buff *skb,
return RMNET_MAP_CONSUMED;
if (port->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
- if (ep->mux_id == 0xff)
+ if (mux_id == 0xff)
map_header->mux_id = 0;
else
- map_header->mux_id = ep->mux_id;
+ map_header->mux_id = mux_id;
}
skb->protocol = htons(ETH_P_MAP);
@@ -176,14 +175,17 @@ rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
* for egress device configured in logical endpoint. Packet is then transmitted
* on the egress device.
*/
-void rmnet_egress_handler(struct sk_buff *skb,
- struct rmnet_endpoint *ep)
+void rmnet_egress_handler(struct sk_buff *skb)
{
struct net_device *orig_dev;
struct rmnet_port *port;
+ struct rmnet_priv *priv;
+ u8 mux_id;
orig_dev = skb->dev;
- skb->dev = ep->egress_dev;
+ priv = netdev_priv(orig_dev);
+ skb->dev = priv->real_dev;
+ mux_id = priv->mux_id;
port = rmnet_get_port(skb->dev);
if (!port) {
@@ -192,7 +194,7 @@ void rmnet_egress_handler(struct sk_buff *skb,
}
if (port->egress_data_format & RMNET_EGRESS_FORMAT_MAP) {
- switch (rmnet_map_egress_handler(skb, port, ep, orig_dev)) {
+ switch (rmnet_map_egress_handler(skb, port, mux_id, orig_dev)) {
case RMNET_MAP_CONSUMED:
return;
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.h
index f2638cf..3537e4c 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.h
@@ -18,8 +18,7 @@
#include "rmnet_config.h"
-void rmnet_egress_handler(struct sk_buff *skb,
- struct rmnet_endpoint *ep);
+void rmnet_egress_handler(struct sk_buff *skb);
rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb);
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 7f90d55..4ca59a4 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -45,8 +45,8 @@ static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
struct rmnet_priv *priv;
priv = netdev_priv(dev);
- if (priv->local_ep.egress_dev) {
- rmnet_egress_handler(skb, &priv->local_ep);
+ if (priv->real_dev) {
+ rmnet_egress_handler(skb);
} else {
dev->stats.tx_dropped++;
kfree_skb(skb);
@@ -143,21 +143,6 @@ u8 rmnet_vnd_get_mux(struct net_device *rmnet_dev)
return priv->mux_id;
}
-/* Gets the logical endpoint configuration for a RmNet virtual network device
- * node. Caller should confirm that devices is a RmNet VND before calling.
- */
-struct rmnet_endpoint *rmnet_vnd_get_endpoint(struct net_device *rmnet_dev)
-{
- struct rmnet_priv *priv;
-
- if (!rmnet_dev)
- return NULL;
-
- priv = netdev_priv(rmnet_dev);
-
- return &priv->local_ep;
-}
-
int rmnet_vnd_do_flow_control(struct net_device *rmnet_dev, int enable)
{
netdev_dbg(rmnet_dev, "Setting VND TX queue state to %d\n", enable);
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
index 8a4042f..cae134d 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
@@ -17,7 +17,6 @@
#define _RMNET_VND_H_
int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
-struct rmnet_endpoint *rmnet_vnd_get_endpoint(struct net_device *dev);
int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct rmnet_port *port,
struct net_device *real_dev);
--
1.9.1
next prev parent reply other threads:[~2017-10-12 0:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-12 0:43 [PATCH net-next v2 0/7] net: qualcomm: rmnet: Rewrite some existing functionality Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` [PATCH net-next v2 1/7] net: qualcomm: rmnet: Remove existing logic for bridge mode Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` [PATCH net-next v2 2/7] net: qualcomm: rmnet: Remove some unused defines Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` [PATCH net-next v2 3/7] net: qualcomm: rmnet: Move rmnet_mode to rmnet_port Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` Subash Abhinov Kasiviswanathan [this message]
2017-10-12 0:43 ` [PATCH net-next v2 5/7] net: qualcomm: rmnet: Remove duplicate setting of rmnet_devices Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` [PATCH net-next v2 6/7] net: qualcomm: rmnet: Convert the muxed endpoint to hlist Subash Abhinov Kasiviswanathan
2017-10-12 0:43 ` [PATCH net-next v2 7/7] net: qualcomm: rmnet: Implement bridge mode Subash Abhinov Kasiviswanathan
2017-10-12 3:10 ` [PATCH net-next v2 0/7] net: qualcomm: rmnet: Rewrite some existing functionality David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507769038-30231-5-git-send-email-subashab@codeaurora.org \
--to=subashab@codeaurora.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).