From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "David S . Miller" <davem@davemloft.net>,
"Sergei Shtylyov" <sergei.shtylyov@cogentembedded.com>,
"Simon Horman" <horms+renesas@verge.net.au>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] ravb: Consolidate clock handling
Date: Thu, 12 Oct 2017 10:24:53 +0200 [thread overview]
Message-ID: <1507796693-14268-1-git-send-email-geert+renesas@glider.be> (raw)
The module clock is used for two purposes:
- Wake-on-LAN (WoL), which is optional,
- gPTP Timer Increment (GTI) configuration, which is mandatory.
As the clock is needed for GTI configuration anyway, WoL is always
available. Hence remove duplication and repeated obtaining of the clock
by making GTI use the stored clock for WoL use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/net/ethernet/renesas/ravb_main.c | 35 +++++++++-----------------------
1 file changed, 10 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index fdf30bfa403bf416..8fad62f08e85e3ac 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1337,20 +1337,15 @@ static void ravb_get_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
{
struct ravb_private *priv = netdev_priv(ndev);
- wol->supported = 0;
- wol->wolopts = 0;
-
- if (priv->clk) {
- wol->supported = WAKE_MAGIC;
- wol->wolopts = priv->wol_enabled ? WAKE_MAGIC : 0;
- }
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = priv->wol_enabled ? WAKE_MAGIC : 0;
}
static int ravb_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
{
struct ravb_private *priv = netdev_priv(ndev);
- if (!priv->clk || wol->wolopts & ~WAKE_MAGIC)
+ if (wol->wolopts & ~WAKE_MAGIC)
return -EOPNOTSUPP;
priv->wol_enabled = !!(wol->wolopts & WAKE_MAGIC);
@@ -1912,22 +1907,12 @@ MODULE_DEVICE_TABLE(of, ravb_match_table);
static int ravb_set_gti(struct net_device *ndev)
{
-
+ struct ravb_private *priv = netdev_priv(ndev);
struct device *dev = ndev->dev.parent;
- struct device_node *np = dev->of_node;
unsigned long rate;
- struct clk *clk;
uint64_t inc;
- clk = of_clk_get(np, 0);
- if (IS_ERR(clk)) {
- dev_err(dev, "could not get clock\n");
- return PTR_ERR(clk);
- }
-
- rate = clk_get_rate(clk);
- clk_put(clk);
-
+ rate = clk_get_rate(priv->clk);
if (!rate)
return -EINVAL;
@@ -2073,10 +2058,11 @@ static int ravb_probe(struct platform_device *pdev)
priv->chip_id = chip_id;
- /* Get clock, if not found that's OK but Wake-On-Lan is unavailable */
priv->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(priv->clk))
- priv->clk = NULL;
+ if (IS_ERR(priv->clk)) {
+ error = PTR_ERR(priv->clk);
+ goto out_release;
+ }
/* Set function */
ndev->netdev_ops = &ravb_netdev_ops;
@@ -2144,8 +2130,7 @@ static int ravb_probe(struct platform_device *pdev)
if (error)
goto out_napi_del;
- if (priv->clk)
- device_set_wakeup_capable(&pdev->dev, 1);
+ device_set_wakeup_capable(&pdev->dev, 1);
/* Print device information */
netdev_info(ndev, "Base address at %#x, %pM, IRQ %d.\n",
--
2.7.4
next reply other threads:[~2017-10-12 8:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-12 8:24 Geert Uytterhoeven [this message]
2017-10-12 9:55 ` [PATCH] ravb: Consolidate clock handling Simon Horman
2017-10-12 12:20 ` Geert Uytterhoeven
2017-10-13 8:05 ` Simon Horman
2017-10-12 13:46 ` Niklas Söderlund
2017-10-12 19:31 ` Sergei Shtylyov
2017-10-13 6:01 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507796693-14268-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=davem@davemloft.net \
--cc=horms+renesas@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).