[PATCH net-next v4 02/10] devlink: Adding SR-IOV enablement perm config param

[Steve Lin <steven.lin1@broadcom.com>]

Adding DEVLINK_PERM_CONFIG_SRIOV_ENABLED permanent config
parameter.  Value is permanent, so becomes the new default
value for this device.

  DEVLINK_PERM_CONFIG_DISABLE = Disable SR-IOV
  DEVLINK_PERM_CONFIG_ENABLE  = Enable SR-IOV

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Andy Gospodarek <gospo@broadcom.com>
---
 include/uapi/linux/devlink.h | 14 +++++++++++++-
 net/core/devlink.c           |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index b3a0b2a..9a41f6e 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -256,8 +256,20 @@ enum devlink_dpipe_header_id {
 	DEVLINK_DPIPE_HEADER_IPV6,
 };
 
-/* Permanent config parameters */
+enum devlink_perm_config_enabled {
+	DEVLINK_PERM_CONFIG_DISABLE,
+	DEVLINK_PERM_CONFIG_ENABLE,
+};
+
+/* Permanent config parameters:
+ * DEVLINK_PERM_CONFIG_SRIOV_ENABLED: Configures whether SR-IOV PCI capability
+ * provided by device.
+ *   DEVLINK_PERM_CONFIG_DISABLE = disable SR-IOV
+ *   DEVLINK_PERM_CONFIG_ENABLE  = enable SR-IOV
+ */
 enum devlink_perm_config_param {
+	DEVLINK_PERM_CONFIG_SRIOV_ENABLED,
+
 	__DEVLINK_PERM_CONFIG_MAX,
 	DEVLINK_PERM_CONFIG_MAX = __DEVLINK_PERM_CONFIG_MAX - 1
 };
diff --git a/net/core/devlink.c b/net/core/devlink.c
index a7fa7cc..395c93c 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -1569,6 +1569,7 @@ static int devlink_nl_cmd_eswitch_set_doit(struct sk_buff *skb,
 static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1];
 
 static const u8 devlink_perm_cfg_param_types[DEVLINK_PERM_CONFIG_MAX + 1] = {
+	[DEVLINK_PERM_CONFIG_SRIOV_ENABLED] = NLA_U8,
 };
 
 static int devlink_nl_single_param_get(struct sk_buff *msg,
-- 
2.7.4