From: Jesper Dangaard Brouer <brouer@redhat.com>
To: netdev@vger.kernel.org
Cc: Robert Olsson <robert@herjulf.se>,
Jesper Dangaard Brouer <brouer@redhat.com>,
robert.hu@intel.com, pabeni@redhat.com, kafai@fb.com,
tariqt@mellanox.com
Subject: [net-next PATCH 4/4] samples/pktgen: remove remaining old pktgen sample scripts
Date: Wed, 01 Nov 2017 11:41:24 +0100 [thread overview]
Message-ID: <150953288445.29671.5235599066338592919.stgit@firesoul> (raw)
In-Reply-To: <150953283424.29671.6809291616813585256.stgit@firesoul>
Since commit 0f06a6787e05 ("samples: Add an IPv6 '-6' option to the
pktgen scripts") the newer pktgen_sampleXX script does show howto use
IPv6 with pktgen.
Thus, there is no longer a reason to keep the older sample scripts around.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
samples/pktgen/pktgen.conf-1-1-ip6 | 60 ---------------------------
samples/pktgen/pktgen.conf-1-1-ip6-rdos | 63 ----------------------------
samples/pktgen/pktgen.conf-1-2 | 69 -------------------------------
3 files changed, 192 deletions(-)
delete mode 100755 samples/pktgen/pktgen.conf-1-1-ip6
delete mode 100755 samples/pktgen/pktgen.conf-1-1-ip6-rdos
delete mode 100755 samples/pktgen/pktgen.conf-1-2
diff --git a/samples/pktgen/pktgen.conf-1-1-ip6 b/samples/pktgen/pktgen.conf-1-1-ip6
deleted file mode 100755
index 0b9ffd47fd41..000000000000
--- a/samples/pktgen/pktgen.conf-1-1-ip6
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# Each CPU has its own thread. One CPU example. We add eth1.
-# IPv6. Note increase in minimal packet length
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
-
-
-# device config
-# delay 0
-
-CLONE_SKB="clone_skb 1000000"
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 66"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst6 fec0::1"
- pgset "src6 fec0::2"
- pgset "dst_mac 00:04:23:08:91:dc"
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-1-ip6-rdos b/samples/pktgen/pktgen.conf-1-1-ip6-rdos
deleted file mode 100755
index ad98e5f40776..000000000000
--- a/samples/pktgen/pktgen.conf-1-1-ip6-rdos
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# Each CPU has its own thread. One CPU example. We add eth1.
-# IPv6. Note increase in minimal packet length
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
-
-
-# device config
-# delay 0 means maximum speed.
-
-# We need to do alloc for every skb since we cannot clone here.
-CLONE_SKB="clone_skb 0"
-
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 66"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst6_min fec0::1"
- pgset "dst6_max fec0::FFFF:FFFF"
-
- pgset "dst_mac 00:04:23:08:91:dc"
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-2 b/samples/pktgen/pktgen.conf-1-2
deleted file mode 100755
index ba4eb26e168d..000000000000
--- a/samples/pktgen/pktgen.conf-1-2
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# One CPU means one thread. One CPU example. We add eth1, eth2 respectivly.
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
- echo "Adding eth2"
- pgset "add_device eth2"
-
-
-# device config
-# delay 0 means maximum speed.
-
-CLONE_SKB="clone_skb 1000000"
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 60"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 10.10.11.2"
- pgset "dst_mac 00:04:23:08:91:dc"
-
-PGDEV=/proc/net/pktgen/eth2
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 192.168.2.2"
- pgset "dst_mac 00:04:23:08:91:de"
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1 /proc/net/pktgen/eth2
next prev parent reply other threads:[~2017-11-01 10:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-01 10:41 [net-next PATCH 0/4] Updates for samples/pktgen Jesper Dangaard Brouer
2017-11-01 10:41 ` [net-next PATCH 1/4] samples/pktgen: Add some helper functions Jesper Dangaard Brouer
2017-11-01 10:41 ` [net-next PATCH 2/4] samples/pktgen: add script pktgen_sample06_numa_awared_queue_irq_affinity.sh Jesper Dangaard Brouer
2017-11-01 10:41 ` [net-next PATCH 3/4] samples/pktgen: update sample03, no need for clones when bursting Jesper Dangaard Brouer
2017-11-01 10:41 ` Jesper Dangaard Brouer [this message]
2017-11-01 16:28 ` [net-next PATCH 0/4] Updates for samples/pktgen Alexei Starovoitov
2017-11-02 5:20 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=150953288445.29671.5235599066338592919.stgit@firesoul \
--to=brouer@redhat.com \
--cc=kafai@fb.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robert.hu@intel.com \
--cc=robert@herjulf.se \
--cc=tariqt@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox