[PATCH 2/2] net: dsa: lan9303: check error value from devm_gpiod_get_optional()

[Phil Reid <preid@electromag.com.au>]

devm_gpiod_get_optional() can return an error in addition to a NULL ptr.
Check for error and propagate that to the probe function. Check return
value in probe. This will now handle EPROBE_DEFER for the reset gpio.

Signed-off-by: Phil Reid <preid@electromag.com.au>
---
 drivers/net/dsa/lan9303-core.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index cc00308..b63173c 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -820,15 +820,18 @@ static int lan9303_register_switch(struct lan9303 *chip)
 	return dsa_register_switch(chip->ds);
 }
 
-static void lan9303_probe_reset_gpio(struct lan9303 *chip,
+static int lan9303_probe_reset_gpio(struct lan9303 *chip,
 				     struct device_node *np)
 {
 	chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
 						   GPIOD_OUT_LOW);
 
+	if (IS_ERR(chip->reset_gpio))
+		return PTR_ERR(chip->reset_gpio);
+
 	if (!chip->reset_gpio) {
 		dev_dbg(chip->dev, "No reset GPIO defined\n");
-		return;
+		return 0;
 	}
 
 	chip->reset_duration = 200;
@@ -843,6 +846,8 @@ static void lan9303_probe_reset_gpio(struct lan9303 *chip,
 	/* A sane reset duration should not be longer than 1s */
 	if (chip->reset_duration > 1000)
 		chip->reset_duration = 1000;
+
+	return 0;
 }
 
 int lan9303_probe(struct lan9303 *chip, struct device_node *np)
@@ -851,7 +856,9 @@ int lan9303_probe(struct lan9303 *chip, struct device_node *np)
 
 	mutex_init(&chip->indirect_mutex);
 
-	lan9303_probe_reset_gpio(chip, np);
+	ret = lan9303_probe_reset_gpio(chip, np);
+	if (ret)
+		return ret;
 
 	lan9303_handle_reset(chip);
 
-- 
1.8.3.1