[PATCH] flex_can: Fix checking can_dlc

[Luu An Phu <phu.luuan@nxp.com>]

From: "phu.luuan" <phu.luuan@nxp.com>

flexcan_start_xmit should write data to register when can_dlc > 4.
Because can_dlc is data length and it has value from 1 to 8. But CAN data
index has value from 0 to 7. So in case we have data in cf->data[4],
the can_dlc has value is more than 4.

Signed-off-by: Luu An Phu <phu.luuan@nxp.com>
---
 drivers/net/can/flexcan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 0626dcf..0e3ff13 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2009 Sascha Hauer, Pengutronix
  * Copyright (c) 2010-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
  * Copyright (c) 2014 David Jander, Protonic Holland
+ * Copyright 2017 NXP
  *
  * Based on code originally by Andrey Volkov <avolkov@varma-el.com>
  *
@@ -526,7 +527,7 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		data = be32_to_cpup((__be32 *)&cf->data[0]);
 		flexcan_write(data, &priv->tx_mb->data[0]);
 	}
-	if (cf->can_dlc > 3) {
+	if (cf->can_dlc > 4) {
 		data = be32_to_cpup((__be32 *)&cf->data[4]);
 		flexcan_write(data, &priv->tx_mb->data[1]);
 	}
-- 
1.9.1