From: Lipeng <lipeng321@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, <salil.mehta@huawei.com>,
<lipeng321@huawei.com>
Subject: [PATCH V4 net-next 07/17] net: hns3: add vlan offload config command
Date: Thu, 21 Dec 2017 15:28:53 +0800 [thread overview]
Message-ID: <1513841343-60964-8-git-send-email-lipeng321@huawei.com> (raw)
In-Reply-To: <1513841343-60964-1-git-send-email-lipeng321@huawei.com>
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 158 ++++++++++++++++++++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 36 +++++
3 files changed, 233 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 10adf86..f5baba21 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -180,6 +180,10 @@ enum hclge_opcode_type {
/* Promisuous mode command */
HCLGE_OPC_CFG_PROMISC_MODE = 0x0E01,
+ /* Vlan offload command */
+ HCLGE_OPC_VLAN_PORT_TX_CFG = 0x0F01,
+ HCLGE_OPC_VLAN_PORT_RX_CFG = 0x0F02,
+
/* Interrupts cmd */
HCLGE_OPC_ADD_RING_TO_VECTOR = 0x1503,
HCLGE_OPC_DEL_RING_TO_VECTOR = 0x1504,
@@ -670,6 +674,47 @@ struct hclge_vlan_filter_vf_cfg_cmd {
u8 vf_bitmap[16];
};
+#define HCLGE_ACCEPT_TAG_B 0
+#define HCLGE_ACCEPT_UNTAG_B 1
+#define HCLGE_PORT_INS_TAG1_EN_B 2
+#define HCLGE_PORT_INS_TAG2_EN_B 3
+#define HCLGE_CFG_NIC_ROCE_SEL_B 4
+struct hclge_vport_vtag_tx_cfg_cmd {
+ u8 vport_vlan_cfg;
+ u8 vf_offset;
+ u8 rsv1[2];
+ __le16 def_vlan_tag1;
+ __le16 def_vlan_tag2;
+ u8 vf_bitmap[8];
+ u8 rsv2[8];
+};
+
+#define HCLGE_REM_TAG1_EN_B 0
+#define HCLGE_REM_TAG2_EN_B 1
+#define HCLGE_SHOW_TAG1_EN_B 2
+#define HCLGE_SHOW_TAG2_EN_B 3
+struct hclge_vport_vtag_rx_cfg_cmd {
+ u8 vport_vlan_cfg;
+ u8 vf_offset;
+ u8 rsv1[6];
+ u8 vf_bitmap[8];
+ u8 rsv2[8];
+};
+
+struct hclge_tx_vlan_type_cfg_cmd {
+ __le16 ot_vlan_type;
+ __le16 in_vlan_type;
+ u8 rsv[20];
+};
+
+struct hclge_rx_vlan_type_cfg_cmd {
+ __le16 ot_fst_vlan_type;
+ __le16 ot_sec_vlan_type;
+ __le16 in_fst_vlan_type;
+ __le16 in_sec_vlan_type;
+ u8 rsv[16];
+};
+
struct hclge_cfg_com_tqp_queue_cmd {
__le16 tqp_id;
__le16 stream_id;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a1d9398..113b859 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4380,23 +4380,169 @@ static int hclge_set_vf_vlan_filter(struct hnae3_handle *handle, int vfid,
return hclge_set_vf_vlan_common(hdev, vfid, false, vlan, qos, proto);
}
+static int hclge_set_vlan_tx_offload_cfg(struct hclge_vport *vport)
+{
+ struct hclge_tx_vtag_cfg *vcfg = &vport->txvlan_cfg;
+ struct hclge_vport_vtag_tx_cfg_cmd *req;
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_TX_CFG, false);
+
+ req = (struct hclge_vport_vtag_tx_cfg_cmd *)desc.data;
+ req->def_vlan_tag1 = cpu_to_le16(vcfg->default_tag1);
+ req->def_vlan_tag2 = cpu_to_le16(vcfg->default_tag2);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_TAG_B,
+ vcfg->accept_tag ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_UNTAG_B,
+ vcfg->accept_untag ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG1_EN_B,
+ vcfg->insert_tag1_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG2_EN_B,
+ vcfg->insert_tag2_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_CFG_NIC_ROCE_SEL_B, 0);
+
+ req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+ req->vf_bitmap[req->vf_offset] =
+ 1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send port txvlan cfg command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
+static int hclge_set_vlan_rx_offload_cfg(struct hclge_vport *vport)
+{
+ struct hclge_rx_vtag_cfg *vcfg = &vport->rxvlan_cfg;
+ struct hclge_vport_vtag_rx_cfg_cmd *req;
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_RX_CFG, false);
+
+ req = (struct hclge_vport_vtag_rx_cfg_cmd *)desc.data;
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG1_EN_B,
+ vcfg->strip_tag1_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG2_EN_B,
+ vcfg->strip_tag2_en ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG1_EN_B,
+ vcfg->vlan1_vlan_prionly ? 1 : 0);
+ hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG2_EN_B,
+ vcfg->vlan2_vlan_prionly ? 1 : 0);
+
+ req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+ req->vf_bitmap[req->vf_offset] =
+ 1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send port rxvlan cfg command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
+static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
+{
+ struct hclge_rx_vlan_type_cfg_cmd *rx_req;
+ struct hclge_tx_vlan_type_cfg_cmd *tx_req;
+ struct hclge_desc desc;
+ int status;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_TYPE_ID, false);
+ rx_req = (struct hclge_rx_vlan_type_cfg_cmd *)desc.data;
+ rx_req->ot_fst_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_ot_fst_vlan_type);
+ rx_req->ot_sec_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_ot_sec_vlan_type);
+ rx_req->in_fst_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_in_fst_vlan_type);
+ rx_req->in_sec_vlan_type =
+ cpu_to_le16(hdev->vlan_type_cfg.rx_in_sec_vlan_type);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status) {
+ dev_err(&hdev->pdev->dev,
+ "Send rxvlan protocol type command fail, ret =%d\n",
+ status);
+ return status;
+ }
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_INSERT, false);
+
+ tx_req = (struct hclge_tx_vlan_type_cfg_cmd *)&desc.data;
+ tx_req->ot_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_ot_vlan_type);
+ tx_req->in_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_in_vlan_type);
+
+ status = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (status)
+ dev_err(&hdev->pdev->dev,
+ "Send txvlan protocol type command fail, ret =%d\n",
+ status);
+
+ return status;
+}
+
static int hclge_init_vlan_config(struct hclge_dev *hdev)
{
-#define HCLGE_VLAN_TYPE_VF_TABLE 0
-#define HCLGE_VLAN_TYPE_PORT_TABLE 1
+#define HCLGE_FILTER_TYPE_VF 0
+#define HCLGE_FILTER_TYPE_PORT 1
+#define HCLGE_DEF_VLAN_TYPE 0x8100
+
struct hnae3_handle *handle;
+ struct hclge_vport *vport;
int ret;
+ int i;
+
+ ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_VF, true);
+ if (ret)
+ return ret;
- ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_VF_TABLE,
- true);
+ ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, true);
if (ret)
return ret;
- ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_PORT_TABLE,
- true);
+ hdev->vlan_type_cfg.rx_in_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_in_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_ot_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.rx_ot_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.tx_ot_vlan_type = HCLGE_DEF_VLAN_TYPE;
+ hdev->vlan_type_cfg.tx_in_vlan_type = HCLGE_DEF_VLAN_TYPE;
+
+ ret = hclge_set_vlan_protocol_type(hdev);
if (ret)
return ret;
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ vport = &hdev->vport[i];
+ vport->txvlan_cfg.accept_tag = true;
+ vport->txvlan_cfg.accept_untag = true;
+ vport->txvlan_cfg.insert_tag1_en = false;
+ vport->txvlan_cfg.insert_tag2_en = false;
+ vport->txvlan_cfg.default_tag1 = 0;
+ vport->txvlan_cfg.default_tag2 = 0;
+
+ ret = hclge_set_vlan_tx_offload_cfg(vport);
+ if (ret)
+ return ret;
+
+ vport->rxvlan_cfg.strip_tag1_en = false;
+ vport->rxvlan_cfg.strip_tag2_en = true;
+ vport->rxvlan_cfg.vlan1_vlan_prionly = false;
+ vport->rxvlan_cfg.vlan2_vlan_prionly = false;
+
+ ret = hclge_set_vlan_rx_offload_cfg(vport);
+ if (ret)
+ return ret;
+ }
+
handle = &hdev->vport[0].nic;
return hclge_set_port_vlan_filter(handle, htons(ETH_P_8021Q), 0, false);
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 4858909..cda520c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -79,6 +79,10 @@
#define HCLGE_PHY_MDIX_STATUS_B (6)
#define HCLGE_PHY_SPEED_DUP_RESOLVE_B (11)
+/* Factor used to calculate offset and bitmap of VF num */
+#define HCLGE_VF_NUM_PER_CMD 64
+#define HCLGE_VF_NUM_PER_BYTE 8
+
/* Reset related Registers */
#define HCLGE_MISC_RESET_STS_REG 0x20700
#define HCLGE_GLOBAL_RESET_REG 0x20A00
@@ -424,6 +428,15 @@ struct hclge_hw_stats {
struct hclge_32_bit_stats all_32_bit_stats;
};
+struct hclge_vlan_type_cfg {
+ u16 rx_ot_fst_vlan_type;
+ u16 rx_ot_sec_vlan_type;
+ u16 rx_in_fst_vlan_type;
+ u16 rx_in_sec_vlan_type;
+ u16 tx_ot_vlan_type;
+ u16 tx_in_vlan_type;
+};
+
struct hclge_dev {
struct pci_dev *pdev;
struct hnae3_ae_dev *ae_dev;
@@ -510,6 +523,26 @@ struct hclge_dev {
enum hclge_mta_dmac_sel_type mta_mac_sel_type;
bool enable_mta; /* Mutilcast filter enable */
bool accept_mta_mc; /* Whether accept mta filter multicast */
+
+ struct hclge_vlan_type_cfg vlan_type_cfg;
+};
+
+/* VPort level vlan tag configuration for TX direction */
+struct hclge_tx_vtag_cfg {
+ bool accept_tag; /* Whether accept tagged packet from host */
+ bool accept_untag; /* Whether accept untagged packet from host */
+ bool insert_tag1_en; /* Whether insert inner vlan tag */
+ bool insert_tag2_en; /* Whether insert outer vlan tag */
+ u16 default_tag1; /* The default inner vlan tag to insert */
+ u16 default_tag2; /* The default outer vlan tag to insert */
+};
+
+/* VPort level vlan tag configuration for RX direction */
+struct hclge_rx_vtag_cfg {
+ bool strip_tag1_en; /* Whether strip inner vlan tag */
+ bool strip_tag2_en; /* Whether strip outer vlan tag */
+ bool vlan1_vlan_prionly;/* Inner VLAN Tag up to descriptor Enable */
+ bool vlan2_vlan_prionly;/* Outer VLAN Tag up to descriptor Enable */
};
struct hclge_vport {
@@ -524,6 +557,9 @@ struct hclge_vport {
u16 bw_limit; /* VSI BW Limit (0 = disabled) */
u8 dwrr;
+ struct hclge_tx_vtag_cfg txvlan_cfg;
+ struct hclge_rx_vtag_cfg rxvlan_cfg;
+
int vport_id;
struct hclge_dev *back; /* Back reference to associated dev */
struct hnae3_handle nic;
--
1.9.1
next prev parent reply other threads:[~2017-12-21 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-21 7:28 [PATCH V4 net-next 00/17] add some features and fix some bugs for HNS3 driver Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 01/17] net: hns3: add support to query tqps number Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 02/17] net: hns3: add support to modify " Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 03/17] net: hns3: change the returned tqp number by ethtool -x Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 04/17] net: hns3: free the ring_data structrue when change tqps Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 05/17] net: hns3: get rss_size_max from configuration but not hardcode Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 06/17] net: hns3: add a mask initialization for mac_vlan table Lipeng
2017-12-21 7:28 ` Lipeng [this message]
2017-12-21 7:28 ` [PATCH V4 net-next 08/17] net: hns3: add ethtool related offload command Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 09/17] net: hns3: add handling vlan tag offload in bd Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 10/17] net: hns3: cleanup mac auto-negotiation state query Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 11/17] net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 12/17] net: hns3: add support for set_pauseparam Lipeng
2017-12-21 7:28 ` [PATCH V4 net-next 13/17] net: hns3: add support to update flow control settings after autoneg Lipeng
2017-12-21 7:29 ` [PATCH V4 net-next 14/17] net: hns3: add Asym Pause support to phy default features Lipeng
2017-12-21 7:29 ` [PATCH V4 net-next 15/17] net: hns3: add support for querying advertised pause frame by ethtool ethx Lipeng
2017-12-21 7:29 ` [PATCH V4 net-next 16/17] net: hns3: Increase the default depth of bucket for TM shaper Lipeng
2017-12-21 7:29 ` [PATCH V4 net-next 17/17] net: hns3: change TM sched mode to TC-based mode when SRIOV enabled Lipeng
2017-12-21 15:08 ` [PATCH V4 net-next 00/17] add some features and fix some bugs for HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513841343-60964-8-git-send-email-lipeng321@huawei.com \
--to=lipeng321@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox