From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Li Subject: [PATCH V2 net-next 0/4] add some features to hns3 driver Date: Fri, 19 Jan 2018 14:41:08 +0800 Message-ID: <1516344072-109127-1-git-send-email-lipeng321@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , To: Return-path: Received: from szxga06-in.huawei.com ([45.249.212.32]:33001 "EHLO huawei.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750974AbeASGMq (ORCPT ); Fri, 19 Jan 2018 01:12:46 -0500 Sender: netdev-owner@vger.kernel.org List-ID: This patchset adds some features to hns3 driver, include the support for ethtool command -d, -p and support for manager table. [Patch 1/4] adds support for ethtool command -d, its ops is get_regs. driver will send command to command queue, and get regs number and regs value from command queue. [Patch 2/4] adds manager table initialization for hardware. [Patch 3/4] adds support for ethtool command -p. For fiber ports, driver sends command to command queue, and IMP will write SGPIO regs to control leds. [Patch 4/4] adds support for net status led for fiber ports. Net status include port speed, total rx/tx packets and link status. Driver send the status to command queue, and IMP will write SGPIO to control leds. --- Change log: V1 -> V2: 1, fix comments from Andrew Lunn, remove the patch "net: hns3: add ethtool -p support for phy device". --- Fuyun Liang (2): net: hns3: add support for get_regs net: hns3: add manager table initialization for hardware Jian Shen (2): net: hns3: add ethtool -p support for fiber port net: hns3: add net status led support for fiber port drivers/net/ethernet/hisilicon/hns3/hnae3.h | 5 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 35 ++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 47 +++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 456 +++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 3 + 5 files changed, 545 insertions(+), 1 deletion(-) -- 2.9.3