From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Kodanev Subject: [PATCH net] udplite: fix partial checksum initialization Date: Thu, 15 Feb 2018 20:18:43 +0300 Message-ID: <1518715123-5990-1-git-send-email-alexey.kodanev@oracle.com> Cc: Tom Herbert , David Miller , Alexey Kodanev To: netdev@vger.kernel.org Return-path: Received: from aserp2130.oracle.com ([141.146.126.79]:41652 "EHLO aserp2130.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422981AbeBOROm (ORCPT ); Thu, 15 Feb 2018 12:14:42 -0500 Sender: netdev-owner@vger.kernel.org List-ID: Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev --- Alternatively, we could modify skb_checksum_init_zero_check() because it is used only in udp4_csum_init() and udp6_csum_init() as well as introducing a new 'cscov' parameter in __skb_checksum_validate_complete() and calling __skb_checksum_complete_head() if 'cscov' not equals zero. But these changes would touch general code in skbuff.h include/net/udplite.h | 1 + net/ipv4/udp.c | 5 +++++ net/ipv6/ip6_checksum.c | 5 +++++ 3 files changed, 11 insertions(+) diff --git a/include/net/udplite.h b/include/net/udplite.h index 81bdbf9..9185e45 100644 --- a/include/net/udplite.h +++ b/include/net/udplite.h @@ -64,6 +64,7 @@ static inline int udplite_checksum_init(struct sk_buff *skb, struct udphdr *uh) UDP_SKB_CB(skb)->cscov = cscov; if (skb->ip_summed == CHECKSUM_COMPLETE) skb->ip_summed = CHECKSUM_NONE; + skb->csum_valid = 0; } return 0; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index bfaefe5..e5ef7c3 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2024,6 +2024,11 @@ static inline int udp4_csum_init(struct sk_buff *skb, struct udphdr *uh, err = udplite_checksum_init(skb, uh); if (err) return err; + + if (UDP_SKB_CB(skb)->partial_cov) { + skb->csum = inet_compute_pseudo(skb, proto); + return 0; + } } /* Note, we are only interested in != 0 or == 0, thus the diff --git a/net/ipv6/ip6_checksum.c b/net/ipv6/ip6_checksum.c index ec43d18..547515e 100644 --- a/net/ipv6/ip6_checksum.c +++ b/net/ipv6/ip6_checksum.c @@ -73,6 +73,11 @@ int udp6_csum_init(struct sk_buff *skb, struct udphdr *uh, int proto) err = udplite_checksum_init(skb, uh); if (err) return err; + + if (UDP_SKB_CB(skb)->partial_cov) { + skb->csum = ip6_compute_pseudo(skb, proto); + return 0; + } } /* To support RFC 6936 (allow zero checksum in UDP/IPV6 for tunnels) -- 1.8.3.1