netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: hkallweit1@gmail.com, Florian Fainelli <f.fainelli@gmail.com>,
	netdev <netdev@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net] net: phy: Restore phy_resume() locking assumption
Date: Mon, 26 Feb 2018 00:04:23 +0100	[thread overview]
Message-ID: <1519599863-22864-1-git-send-email-andrew@lunn.ch> (raw)

commit f5e64032a799 ("net: phy: fix resume handling") changes the
locking semantics for phy_resume() such that the caller now needs to
hold the phy mutex. Not all call sites were adopted to this new
semantic, resulting in warnings from the added
WARN_ON(!mutex_is_locked(&phydev->lock)).  Rather than change the
semantics, add a __phy_resume() and restore the old behavior of
phy_resume().

Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: f5e64032a799 ("net: phy: fix resume handling")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy.c        |  2 +-
 drivers/net/phy/phy_device.c | 18 +++++++++++++-----
 include/linux/phy.h          |  1 +
 3 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e3e29c2b028b..a6f924fee584 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -819,7 +819,7 @@ void phy_start(struct phy_device *phydev)
 		break;
 	case PHY_HALTED:
 		/* if phy was suspended, bring the physical link up again */
-		phy_resume(phydev);
+		__phy_resume(phydev);
 
 		/* make sure interrupts are re-enabled for the PHY */
 		if (phy_interrupt_is_valid(phydev)) {
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d39ae77707ef..4cfb3851ed1f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -135,9 +135,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	if (!mdio_bus_phy_may_suspend(phydev))
 		goto no_resume;
 
-	mutex_lock(&phydev->lock);
 	ret = phy_resume(phydev);
-	mutex_unlock(&phydev->lock);
 	if (ret < 0)
 		return ret;
 
@@ -1041,9 +1039,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	if (err)
 		goto error;
 
-	mutex_lock(&phydev->lock);
 	phy_resume(phydev);
-	mutex_unlock(&phydev->lock);
 	phy_led_triggers_register(phydev);
 
 	return err;
@@ -1172,7 +1168,7 @@ int phy_suspend(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_suspend);
 
-int phy_resume(struct phy_device *phydev)
+int __phy_resume(struct phy_device *phydev)
 {
 	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
 	int ret = 0;
@@ -1189,6 +1185,18 @@ int phy_resume(struct phy_device *phydev)
 
 	return ret;
 }
+EXPORT_SYMBOL(__phy_resume);
+
+int phy_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	mutex_lock(&phydev->lock);
+	ret = phy_resume(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(phy_resume);
 
 int phy_loopback(struct phy_device *phydev, bool enable)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5a0c3e53e7c2..d7069539f351 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -924,6 +924,7 @@ void phy_device_remove(struct phy_device *phydev);
 int phy_init_hw(struct phy_device *phydev);
 int phy_suspend(struct phy_device *phydev);
 int phy_resume(struct phy_device *phydev);
+int __phy_resume(struct phy_device *phydev);
 int phy_loopback(struct phy_device *phydev, bool enable);
 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 			      phy_interface_t interface);
-- 
2.16.2

             reply	other threads:[~2018-02-25 23:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-25 23:04 Andrew Lunn [this message]
2018-02-26  2:09 ` [PATCH net] net: phy: Restore phy_resume() locking assumption Yunsheng Lin
2018-02-26  2:39   ` Andrew Lunn
2018-02-27  3:02 ` [net] cb0789fd8b: INFO:task_blocked_for_more_than#seconds kernel test robot
2018-02-27  4:37   ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519599863-22864-1-git-send-email-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).