From: Peng Li <lipeng321@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, <salil.mehta@huawei.com>,
<lipeng321@huawei.com>
Subject: [PATCH net-next 07/23] {topost} net: hns3: unify the pause params setup function
Date: Thu, 8 Mar 2018 11:06:32 +0800 [thread overview]
Message-ID: <1520478408-116992-8-git-send-email-lipeng321@huawei.com> (raw)
In-Reply-To: <1520478408-116992-1-git-send-email-lipeng321@huawei.com>
From: Fuyun Liang <liangfuyun1@huawei.com>
Since the firmware cmd to setup mac pause params is the same as the
firmware cmd to pfc pause params, this patch unifies the pause params
setup function.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 23 +++++++++++-----------
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 2 +-
3 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 83be4d5..cc72ed8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4431,7 +4431,7 @@ static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
return -EIO;
}
- ret = hclge_mac_pause_addr_cfg(hdev, new_addr);
+ ret = hclge_pause_addr_cfg(hdev, new_addr);
if (ret) {
dev_err(&hdev->pdev->dev,
"configure mac pause address fail, ret =%d.\n",
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 36bd79a..4134a82 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -138,8 +138,8 @@ static int hclge_pfc_pause_en_cfg(struct hclge_dev *hdev, u8 tx_rx_bitmap,
return hclge_cmd_send(&hdev->hw, &desc, 1);
}
-static int hclge_mac_pause_param_cfg(struct hclge_dev *hdev, const u8 *addr,
- u8 pause_trans_gap, u16 pause_trans_time)
+static int hclge_pause_param_cfg(struct hclge_dev *hdev, const u8 *addr,
+ u8 pause_trans_gap, u16 pause_trans_time)
{
struct hclge_cfg_pause_param_cmd *pause_param;
struct hclge_desc desc;
@@ -155,7 +155,7 @@ static int hclge_mac_pause_param_cfg(struct hclge_dev *hdev, const u8 *addr,
return hclge_cmd_send(&hdev->hw, &desc, 1);
}
-int hclge_mac_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr)
+int hclge_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr)
{
struct hclge_cfg_pause_param_cmd *pause_param;
struct hclge_desc desc;
@@ -174,7 +174,7 @@ int hclge_mac_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr)
trans_gap = pause_param->pause_trans_gap;
trans_time = le16_to_cpu(pause_param->pause_trans_time);
- return hclge_mac_pause_param_cfg(hdev, mac_addr, trans_gap,
+ return hclge_pause_param_cfg(hdev, mac_addr, trans_gap,
trans_time);
}
@@ -1096,11 +1096,11 @@ static int hclge_tm_schd_setup_hw(struct hclge_dev *hdev)
return hclge_tm_schd_mode_hw(hdev);
}
-static int hclge_mac_pause_param_setup_hw(struct hclge_dev *hdev)
+static int hclge_pause_param_setup_hw(struct hclge_dev *hdev)
{
struct hclge_mac *mac = &hdev->hw.mac;
- return hclge_mac_pause_param_cfg(hdev, mac->mac_addr,
+ return hclge_pause_param_cfg(hdev, mac->mac_addr,
HCLGE_DEFAULT_PAUSE_TRANS_GAP,
HCLGE_DEFAULT_PAUSE_TRANS_TIME);
}
@@ -1151,13 +1151,12 @@ int hclge_pause_setup_hw(struct hclge_dev *hdev)
int ret;
u8 i;
- if (hdev->tm_info.fc_mode != HCLGE_FC_PFC) {
- ret = hclge_mac_pause_setup_hw(hdev);
- if (ret)
- return ret;
+ ret = hclge_pause_param_setup_hw(hdev);
+ if (ret)
+ return ret;
- return hclge_mac_pause_param_setup_hw(hdev);
- }
+ if (hdev->tm_info.fc_mode != HCLGE_FC_PFC)
+ return hclge_mac_pause_setup_hw(hdev);
/* Only DCB-supported dev supports qset back pressure and pfc cmd */
if (!hnae3_dev_dcb_supported(hdev))
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index 5401e75..c30c85b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -129,5 +129,5 @@ int hclge_tm_dwrr_cfg(struct hclge_dev *hdev);
int hclge_tm_map_cfg(struct hclge_dev *hdev);
int hclge_tm_init_hw(struct hclge_dev *hdev);
int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx);
-int hclge_mac_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr);
+int hclge_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr);
#endif
--
2.9.3
next prev parent reply other threads:[~2018-03-08 3:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 3:06 [PATCH net-next 00/23] net: hns3: HNS3 bug fixes & code improvements Peng Li
2018-03-08 3:06 ` [PATCH net-next 01/23] {topost} net: hns3: VF should get the real rss_size instead of rss_size_max Peng Li
2018-03-08 3:06 ` [PATCH net-next 02/23] {topost} net: hns3: add existence check when remove old uc mac address Peng Li
2018-03-08 3:06 ` [PATCH net-next 03/23] {topost} net: hns3: set the cmdq out_vld bit to 0 after used Peng Li
2018-03-08 3:06 ` [PATCH net-next 04/23] {topost} net: hns3: fix endian issue when PF get mbx message flag Peng Li
2018-03-08 3:06 ` [PATCH net-next 05/23] {topost} net: hns3: fix for netdev not running problem after calling net_stop and net_open Peng Li
2018-03-08 3:06 ` [PATCH net-next 06/23] {topost} net: hns3: fix for ipv6 address loss problem after setting channels Peng Li
2018-03-08 3:06 ` Peng Li [this message]
2018-03-08 3:06 ` [PATCH net-next 08/23] {topost} net: hns3: fix rx path skb->truesize reporting bug Peng Li
2018-03-08 3:06 ` [PATCH net-next 09/23] {topost} net: hns3: add support for querying pfc puase packets statistic Peng Li
2018-03-08 3:06 ` [PATCH net-next 10/23] {topost} net: hns3: refactor the hclge_get/set_rss function Peng Li
2018-03-08 3:06 ` [PATCH net-next 11/23] {topost} net: hns3: refactor the hclge_get/set_rss_tuple function Peng Li
2018-03-08 3:06 ` [PATCH net-next 12/23] {topost} net: hns3: fix for RSS configuration loss problem during reset Peng Li
2018-03-08 3:06 ` [PATCH net-next 13/23] {topost} net: hns3: fix for pause configuration lost " Peng Li
2018-03-08 3:06 ` [PATCH net-next 14/23] {topost} net: hns3: fix for use-after-free when setting ring parameter Peng Li
2018-03-08 3:06 ` [PATCH net-next 15/23] {topost} net: hns3: refactor the get/put_vector function Peng Li
2018-03-08 3:06 ` [PATCH net-next 16/23] {topost} net: hns3: fix for coalesce configuration lost during reset Peng Li
2018-03-08 3:06 ` [PATCH net-next 17/23] {topost} net: hns3: refactor the coalesce related struct Peng Li
2018-03-08 3:06 ` [PATCH net-next 18/23] {topost} net: hns3: fix for coal configuation lost when setting the channel Peng Li
2018-03-08 3:06 ` [PATCH net-next 19/23] {topost} net: hns3: fix for loopback failure when vlan filter is enable Peng Li
2018-03-08 3:06 ` [PATCH net-next 20/23] {topost} net: hns3: fix for buffer overflow smatch warning Peng Li
2018-03-08 3:06 ` [PATCH net-next 21/23] {topost} net: hns3: fix the queue id for tqp enable&&reset Peng Li
2018-03-08 3:06 ` [PATCH net-next 22/23] {topost} net: hns3: set the max ring num when alloc netdev Peng Li
2018-03-08 3:06 ` [PATCH net-next 23/23] {topost} net: hns3: add support for VF driver inner interface hclgevf_ops.get_tqps_and_rss_info Peng Li
2018-03-08 5:00 ` [PATCH net-next 00/23] net: hns3: HNS3 bug fixes & code improvements David Miller
2018-03-08 8:46 ` lipeng (Y)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520478408-116992-8-git-send-email-lipeng321@huawei.com \
--to=lipeng321@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).