Netdev List
 help / color / mirror / Atom feed
From: Shannon Nelson <shannon.nelson@oracle.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, steffen.klassert@secunet.com
Subject: [next-queue 4/4] ixgbe: enable tso with ipsec offload
Date: Thu, 15 Mar 2018 14:23:23 -0700	[thread overview]
Message-ID: <1521149003-1433-5-git-send-email-shannon.nelson@oracle.com> (raw)
In-Reply-To: <1521149003-1433-1-git-send-email-shannon.nelson@oracle.com>

Fix things up to support TSO offload in conjunction
with IPsec hw offload.  This raises throughput with
IPsec offload on to nearly line rate.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c |  7 +++++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  | 25 +++++++++++++++++++------
 2 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 5ddea43..bfbcfc2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -896,6 +896,7 @@ void ixgbe_ipsec_rx(struct ixgbe_ring *rx_ring,
 void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_ipsec *ipsec;
+	netdev_features_t features;
 	size_t size;
 
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
@@ -929,8 +930,10 @@ void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter)
 	ixgbe_ipsec_clear_hw_tables(adapter);
 
 	adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops;
-	adapter->netdev->features |= NETIF_F_HW_ESP;
-	adapter->netdev->hw_enc_features |= NETIF_F_HW_ESP;
+
+	features = NETIF_F_HW_ESP | NETIF_F_HW_ESP_TX_CSUM | NETIF_F_GSO_ESP;
+	adapter->netdev->features |= features;
+	adapter->netdev->hw_enc_features |= features;
 
 	return;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a54f3d8..6022666 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7721,9 +7721,11 @@ static void ixgbe_service_task(struct work_struct *work)
 
 static int ixgbe_tso(struct ixgbe_ring *tx_ring,
 		     struct ixgbe_tx_buffer *first,
-		     u8 *hdr_len)
+		     u8 *hdr_len,
+		     struct ixgbe_ipsec_tx_data *itd)
 {
 	u32 vlan_macip_lens, type_tucmd, mss_l4len_idx;
+	u32 fceof_saidx = 0;
 	struct sk_buff *skb = first->skb;
 	union {
 		struct iphdr *v4;
@@ -7762,9 +7764,13 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring,
 		unsigned char *trans_start = ip.hdr + (ip.v4->ihl * 4);
 
 		/* IP header will have to cancel out any data that
-		 * is not a part of the outer IP header
+		 * is not a part of the outer IP header, except for
+		 * IPsec where we want the IP+ESP header.
 		 */
-		ip.v4->check = csum_fold(csum_partial(trans_start,
+		if (first->tx_flags & IXGBE_TX_FLAGS_IPSEC)
+			ip.v4->check = 0;
+		else
+			ip.v4->check = csum_fold(csum_partial(trans_start,
 						      csum_start - trans_start,
 						      0));
 		type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
@@ -7797,12 +7803,15 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring,
 	mss_l4len_idx = (*hdr_len - l4_offset) << IXGBE_ADVTXD_L4LEN_SHIFT;
 	mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
 
+	fceof_saidx |= itd->sa_idx;
+	type_tucmd |= itd->flags | itd->trailer_len;
+
 	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
 	vlan_macip_lens = l4.hdr - ip.hdr;
 	vlan_macip_lens |= (ip.hdr - skb->data) << IXGBE_ADVTXD_MACLEN_SHIFT;
 	vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
 
-	ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd,
+	ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, fceof_saidx, type_tucmd,
 			  mss_l4len_idx);
 
 	return 1;
@@ -8493,7 +8502,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 	if (skb->sp && !ixgbe_ipsec_tx(tx_ring, first, &ipsec_tx))
 		goto out_drop;
 #endif
-	tso = ixgbe_tso(tx_ring, first, &hdr_len);
+
+	tso = ixgbe_tso(tx_ring, first, &hdr_len, &ipsec_tx);
 	if (tso < 0)
 		goto out_drop;
 	else if (!tso)
@@ -9902,8 +9912,11 @@ ixgbe_features_check(struct sk_buff *skb, struct net_device *dev,
 
 	/* We can only support IPV4 TSO in tunnels if we can mangle the
 	 * inner IP ID field, so strip TSO if MANGLEID is not supported.
+	 * IPsec offoad sets skb->encapsulation but still can handle
+	 * the TSO, so it's the exception.
 	 */
-	if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID))
+	if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID) &&
+	    !skb->sp)
 		features &= ~NETIF_F_TSO;
 
 	return features;
-- 
2.7.4

  parent reply	other threads:[~2018-03-15 21:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-15 21:23 [next-queue 0/4] ixgbe: Enable tso and checksum offload with ipsec Shannon Nelson
2018-03-15 21:23 ` [next-queue 1/4] ixgbe: no need for ipsec csum feature check Shannon Nelson
2018-03-15 21:23 ` [next-queue 2/4] ixgbe: remove unneeded ipsec test in TX path Shannon Nelson
2018-03-15 21:23 ` [next-queue 3/4] ixgbe: no need for esp trailer if gso Shannon Nelson
2018-03-15 21:23 ` Shannon Nelson [this message]
2018-03-15 22:03   ` [Intel-wired-lan] [next-queue 4/4] ixgbe: enable tso with ipsec offload Alexander Duyck
2018-03-15 23:33     ` Shannon Nelson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1521149003-1433-5-git-send-email-shannon.nelson@oracle.com \
    --to=shannon.nelson@oracle.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=netdev@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox