From: Sinan Kaya <okaya@codeaurora.org>
To: netdev@vger.kernel.org, timur@codeaurora.org, sulrich@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Santosh Raspatur <santosh@chelsio.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 14/18] net: cxgb3: Eliminate duplicate barriers on weakly-ordered archs
Date: Fri, 16 Mar 2018 12:16:27 -0400 [thread overview]
Message-ID: <1521216991-28706-15-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1521216991-28706-1-git-send-email-okaya@codeaurora.org>
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.
This ends up CPU observing two barriers back to back before executing the
register write.
Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a wmb().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/net/ethernet/chelsio/cxgb3/adapter.h | 7 +++++++
drivers/net/ethernet/chelsio/cxgb3/sge.c | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/adapter.h b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
index 087ff0f..0e21e66 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
@@ -281,6 +281,13 @@ static inline void t3_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
writel(val, adapter->regs + reg_addr);
}
+static inline void t3_write_reg_relaxed(struct adapter *adapter, u32 reg_addr,
+ u32 val)
+{
+ CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, val);
+ writel_relaxed(val, adapter->regs + reg_addr);
+}
+
static inline struct port_info *adap2pinfo(struct adapter *adap, int idx)
{
return netdev_priv(adap->port[idx]);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index e988caa..0baab06 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -487,7 +487,8 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
if (q->pend_cred >= q->credits / 4) {
q->pend_cred = 0;
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ V_EGRCNTX(q->cntxt_id));
}
}
@@ -1058,8 +1059,8 @@ static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
}
#else
wmb(); /* write descriptors before telling HW */
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
#endif
}
@@ -1510,8 +1511,8 @@ static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
}
spin_unlock(&q->lock);
wmb();
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
return NET_XMIT_SUCCESS;
}
@@ -1554,8 +1555,8 @@ static void restart_ctrlq(unsigned long data)
spin_unlock(&q->lock);
wmb();
- t3_write_reg(qs->adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(qs->adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/*
@@ -1793,8 +1794,8 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
#endif
wmb();
if (likely(written))
- t3_write_reg(adap, A_SG_KDOORBELL,
- F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ t3_write_reg_relaxed(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/**
--
2.7.4
next prev parent reply other threads:[~2018-03-16 16:16 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-16 16:16 [PATCH v3 00/18] Eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 01/18] i40e/i40evf: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 02/18] ixgbe: eliminate " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 03/18] igbvf: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 04/18] igb: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 05/18] ixgbevf: keep writel() closer to wmb() Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 06/18] ixgbevf: eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 07/18] drivers: net: cxgb: Eliminate " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 08/18] scsi: hpsa: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 09/18] fm10k: " Sinan Kaya
2018-03-16 16:30 ` [Intel-wired-lan] " Alexander Duyck
2018-03-16 16:33 ` Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 10/18] net: qla3xxx: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 11/18] qlcnic: " Sinan Kaya
2018-03-19 20:10 ` Chopra, Manish
2018-03-16 16:16 ` [PATCH v3 12/18] bnx2x: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 13/18] net: cxgb4/cxgb4vf: " Sinan Kaya
2018-03-16 16:16 ` Sinan Kaya [this message]
2018-03-16 16:16 ` [PATCH v3 15/18] RDMA/bnxt_re: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 16/18] IB/mlx4: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 17/18] RDMA/i40iw: " Sinan Kaya
2018-03-16 16:16 ` [PATCH v3 18/18] infiniband: cxgb4: " Sinan Kaya
2018-03-16 21:05 ` Steve Wise
2018-03-16 21:46 ` Sinan Kaya
2018-03-16 23:05 ` Steve Wise
2018-03-17 3:40 ` Sinan Kaya
2018-03-17 4:03 ` Sinan Kaya
2018-03-17 4:25 ` Sinan Kaya
2018-03-17 4:30 ` Timur Tabi
2018-03-17 13:23 ` Steve Wise
2018-03-17 13:27 ` David Miller
2018-03-17 15:05 ` Jason Gunthorpe
2018-03-17 18:30 ` Sinan Kaya
2018-03-19 1:48 ` Jason Gunthorpe
2018-03-16 22:13 ` Jason Gunthorpe
2018-03-16 23:04 ` Steve Wise
2018-03-17 4:08 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521216991-28706-15-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=santosh@chelsio.com \
--cc=sulrich@codeaurora.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).