From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Andy Gospodarek <gospo@broadcom.com>
Subject: [PATCH net v2 2/6] bnxt_en: do not allow wildcard matches for L2 flows
Date: Wed, 11 Apr 2018 11:50:14 -0400 [thread overview]
Message-ID: <1523461818-15774-3-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1523461818-15774-1-git-send-email-michael.chan@broadcom.com>
From: Andy Gospodarek <gospo@broadcom.com>
Before this patch the following commands would succeed as far as the
user was concerned:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol all \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01/44 action drop
The current flow offload infrastructure used does not support wildcard
matching for ethernet headers, so do not allow the second or third
commands to succeed. If a user wants to drop traffic on that interface
the protocol and MAC addresses need to be specified explicitly:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol arp \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw action drop
...
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01 action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:02 action drop
...
There are also checks for VLAN parameters in this patch as other callers
may wildcard those parameters even if tc does not. Using different
flow infrastructure could allow this to work in the future for L2 flows,
but for now it does not.
Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 59 ++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
index 65c2cee..ac193408 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
@@ -377,6 +377,30 @@ static bool is_wildcard(void *mask, int len)
return true;
}
+static bool is_exactmatch(void *mask, int len)
+{
+ const u8 *p = mask;
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (p[i] != 0xff)
+ return false;
+
+ return true;
+}
+
+static bool bits_set(void *key, int len)
+{
+ const u8 *p = key;
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (p[i] != 0)
+ return true;
+
+ return false;
+}
+
static int bnxt_hwrm_cfa_flow_alloc(struct bnxt *bp, struct bnxt_tc_flow *flow,
__le16 ref_flow_handle,
__le32 tunnel_handle, __le16 *flow_handle)
@@ -764,6 +788,41 @@ static bool bnxt_tc_can_offload(struct bnxt *bp, struct bnxt_tc_flow *flow)
return false;
}
+ /* Currently source/dest MAC cannot be partial wildcard */
+ if (bits_set(&flow->l2_key.smac, sizeof(flow->l2_key.smac)) &&
+ !is_exactmatch(flow->l2_mask.smac, sizeof(flow->l2_mask.smac))) {
+ netdev_info(bp->dev, "Wildcard match unsupported for Source MAC\n");
+ return false;
+ }
+ if (bits_set(&flow->l2_key.dmac, sizeof(flow->l2_key.dmac)) &&
+ !is_exactmatch(&flow->l2_mask.dmac, sizeof(flow->l2_mask.dmac))) {
+ netdev_info(bp->dev, "Wildcard match unsupported for Dest MAC\n");
+ return false;
+ }
+
+ /* Currently VLAN fields cannot be partial wildcard */
+ if (bits_set(&flow->l2_key.inner_vlan_tci,
+ sizeof(flow->l2_key.inner_vlan_tci)) &&
+ !is_exactmatch(&flow->l2_mask.inner_vlan_tci,
+ sizeof(flow->l2_mask.inner_vlan_tci))) {
+ netdev_info(bp->dev, "Wildcard match unsupported for VLAN TCI\n");
+ return false;
+ }
+ if (bits_set(&flow->l2_key.inner_vlan_tpid,
+ sizeof(flow->l2_key.inner_vlan_tpid)) &&
+ !is_exactmatch(&flow->l2_mask.inner_vlan_tpid,
+ sizeof(flow->l2_mask.inner_vlan_tpid))) {
+ netdev_info(bp->dev, "Wildcard match unsupported for VLAN TPID\n");
+ return false;
+ }
+
+ /* Currently Ethertype must be set */
+ if (!is_exactmatch(&flow->l2_mask.ether_type,
+ sizeof(flow->l2_mask.ether_type))) {
+ netdev_info(bp->dev, "Wildcard match unsupported for Ethertype\n");
+ return false;
+ }
+
return true;
}
--
1.8.3.1
next prev parent reply other threads:[~2018-04-11 15:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-11 15:50 [PATCH net v2 0/6] bnxt_en: Fixes for net Michael Chan
2018-04-11 15:50 ` [PATCH net v2 1/6] bnxt_en: Fix ethtool -x crash when device is down Michael Chan
2018-04-11 15:50 ` Michael Chan [this message]
2018-04-11 18:43 ` [PATCH net v2 2/6] bnxt_en: do not allow wildcard matches for L2 flows Jakub Kicinski
2018-04-11 20:21 ` Michael Chan
2018-04-11 20:31 ` Andy Gospodarek
2018-04-11 20:41 ` Michael Chan
2018-04-11 20:50 ` Andy Gospodarek
2018-04-11 20:55 ` Michael Chan
2018-04-11 21:19 ` Jakub Kicinski
2018-04-11 15:50 ` [PATCH net v2 3/6] bnxt_en: Ignore src port field in decap filter nodes Michael Chan
2018-04-11 15:50 ` [PATCH net v2 4/6] bnxt_en: Support max-mtu with VF-reps Michael Chan
2018-04-11 15:50 ` [PATCH net v2 5/6] bnxt_en: Need to include RDMA rings in bnxt_check_rings() Michael Chan
2018-04-11 15:50 ` [PATCH net v2 6/6] bnxt_en: Fix NULL pointer dereference at bnxt_free_irq() Michael Chan
2018-04-11 18:42 ` [PATCH net v2 0/6] bnxt_en: Fixes for net David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523461818-15774-3-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=gospo@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).