From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Li Subject: [PATCH net-next 08/10] net: hns3: give default option while dependency HNS3 set Date: Fri, 29 Jun 2018 19:23:03 +0800 Message-ID: <1530271385-49668-9-git-send-email-lipeng321@huawei.com> References: <1530271385-49668-1-git-send-email-lipeng321@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , , To: Return-path: In-Reply-To: <1530271385-49668-1-git-send-email-lipeng321@huawei.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org From: Huazhong Tan Give default option for HNS3_HCLGE and HNS3_ENET will be helpful, while dependency HNS3 is set. Meanwhile, use "if HNS3" section instead of all the "depends on HNS3". Signed-off-by: Huazhong Tan Signed-off-by: Peng Li --- drivers/net/ethernet/hisilicon/Kconfig | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig index 8bcf470..27edca8 100644 --- a/drivers/net/ethernet/hisilicon/Kconfig +++ b/drivers/net/ethernet/hisilicon/Kconfig @@ -85,10 +85,12 @@ config HNS3 drivers(like ODP)to register with HNAE devices and their associated operations. +if HNS3 + config HNS3_HCLGE tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support" + default m depends on PCI_MSI - depends on HNS3 ---help--- This selects the HNS3_HCLGE network acceleration engine & its hardware compatibility layer. The engine would be used in Hisilicon hip08 family of @@ -97,16 +99,15 @@ config HNS3_HCLGE config HNS3_DCB bool "Hisilicon HNS3 Data Center Bridge Support" default n - depends on HNS3 && HNS3_HCLGE && DCB + depends on HNS3_HCLGE && DCB ---help--- Say Y here if you want to use Data Center Bridging (DCB) in the HNS3 driver. If unsure, say N. config HNS3_HCLGEVF - tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support" - depends on PCI_MSI - depends on HNS3 + tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support" + depends on PCI_MSI depends on HNS3_HCLGE ---help--- This selects the HNS3 VF drivers network acceleration engine & its hardware @@ -115,11 +116,13 @@ config HNS3_HCLGEVF config HNS3_ENET tristate "Hisilicon HNS3 Ethernet Device Support" + default m depends on 64BIT && PCI - depends on HNS3 ---help--- This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 devices and their associated operations. +endif #HNS3 + endif # NET_VENDOR_HISILICON -- 1.9.1