From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: [PATCH v2 1/5] dt-bindings: net: dwmac-sun8i: Remove unused address-cells/size-cells Date: Wed, 18 Jul 2018 11:40:37 +0000 Message-ID: <1531914041-14751-2-git-send-email-clabbe@baylibre.com> References: <1531914041-14751-1-git-send-email-clabbe@baylibre.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-sunxi@googlegroups.com, Corentin Labbe To: catalin.marinas@arm.com, linux@armlinux.org.uk, mark.rutland@arm.com, maxime.ripard@free-electrons.com, robh+dt@kernel.org, wens@csie.org, will.deacon@arm.com Return-path: In-Reply-To: <1531914041-14751-1-git-send-email-clabbe@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org address-cells/size-cells is unnecessary for dwmac-sun8i node. It was in early days, but since a mdio node is used, it could be removed. Signed-off-by: Corentin Labbe --- Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 8 -------- 1 file changed, 8 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt index cfe724398a12..5bb3a18cc38d 100644 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -19,8 +19,6 @@ Required properties: - reset-names: must be "stmmaceth" - phy-mode: See ethernet.txt - phy-handle: See ethernet.txt -- #address-cells: shall be 1 -- #size-cells: shall be 0 - syscon: A phandle to the device containing the EMAC or GMAC clock register Optional properties: @@ -86,8 +84,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&int_mii_phy>; phy-mode = "mii"; @@ -137,8 +133,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; @@ -191,8 +185,6 @@ emac: ethernet@1c0b000 { reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; -- 2.16.4