From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
maxime.chevallier@bootlin.com, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net-next 12/12] net: ethernet: Add helper to determine if pause configuration is supported
Date: Sun, 2 Sep 2018 19:06:41 +0200 [thread overview]
Message-ID: <1535908001-18593-13-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1535908001-18593-1-git-send-email-andrew@lunn.ch>
Rather than have MAC drivers open code the test, add a helper in
phylib. This will help when we change the type of phydev->supported.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
.../ethernet/apm/xgene/xgene_enet_ethtool.c | 4 +---
drivers/net/ethernet/broadcom/tg3.c | 4 +---
.../ethernet/freescale/dpaa/dpaa_ethtool.c | 4 +---
.../net/ethernet/freescale/gianfar_ethtool.c | 4 +---
drivers/net/phy/phy_device.c | 20 +++++++++++++++++++
include/linux/phy.h | 2 ++
6 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
index dfe03afd00b0..78dd09b5beeb 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
@@ -312,9 +312,7 @@ static int xgene_set_pauseparam(struct net_device *ndev,
if (!phydev)
return -EINVAL;
- if (!(phydev->supported & SUPPORTED_Pause) ||
- (!(phydev->supported & SUPPORTED_Asym_Pause) &&
- pp->rx_pause != pp->tx_pause))
+ if (!phy_validate_pause(phydev, pp))
return -EINVAL;
pdata->pause_autoneg = pp->autoneg;
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index b406b6e34a8c..c6b5a9932d79 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12496,9 +12496,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
phydev = mdiobus_get_phy(tp->mdio_bus, tp->phy_addr);
- if (!(phydev->supported & SUPPORTED_Pause) ||
- (!(phydev->supported & SUPPORTED_Asym_Pause) &&
- (epause->rx_pause != epause->tx_pause)))
+ if (!phy_validate_pause(phydev, epause))
return -EINVAL;
tp->link_config.flowctrl = 0;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index 80a9f2758030..0f0ebdb791cf 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -194,9 +194,7 @@ static int dpaa_set_pauseparam(struct net_device *net_dev,
return -ENODEV;
}
- if (!(phydev->supported & SUPPORTED_Pause) ||
- (!(phydev->supported & SUPPORTED_Asym_Pause) &&
- (epause->rx_pause != epause->tx_pause)))
+ if (!phy_validate_pause(phydev, epause))
return -EINVAL;
/* The MAC should know how to handle PAUSE frame autonegotiation before
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 589a99718694..f8e08ee0be19 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -507,9 +507,7 @@ static int gfar_spauseparam(struct net_device *dev,
if (!phydev)
return -ENODEV;
- if (!(phydev->supported & SUPPORTED_Pause) ||
- (!(phydev->supported & SUPPORTED_Asym_Pause) &&
- (epause->rx_pause != epause->tx_pause)))
+ if (!phy_validate_pause(phydev, epause))
return -EINVAL;
priv->rx_pause_en = priv->tx_pause_en = 0;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 3078792b900f..c1fdb01d56d2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1854,6 +1854,26 @@ void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
}
EXPORT_SYMBOL(phy_set_asym_pause);
+/**
+ * phy_validate_pause - Test if the PHY/MAC support the pause configuration
+ * @phydev: phy_device struct
+ * @pp: requested pause configuration
+ *
+ * Description: Test if the PHY/MAC combination supports the Pause
+ * configuration the user is requesting. Returns True if it is
+ * supported, false otherwise.
+ */
+bool phy_validate_pause(struct phy_device *phydev,
+ struct ethtool_pauseparam *pp)
+{
+ if (!(phydev->supported & SUPPORTED_Pause) ||
+ (!(phydev->supported & SUPPORTED_Asym_Pause) &&
+ pp->rx_pause != pp->tx_pause))
+ return false;
+ return true;
+}
+EXPORT_SYMBOL(phy_validate_pause);
+
static void of_set_phy_supported(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 205fb966d686..a8df64841e31 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1054,6 +1054,8 @@ void phy_support_pause(struct phy_device *phydev);
void phy_support_asym_pause(struct phy_device *phydev);
void phy_set_pause(struct phy_device *phydev, bool rx, bool autoneg);
void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
+bool phy_validate_pause(struct phy_device *phydev,
+ struct ethtool_pauseparam *pp);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
--
2.19.0.rc1
next prev parent reply other threads:[~2018-09-02 21:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-02 17:06 [PATCH net-next 00/12] Preparing for phylib limkmodes Andrew Lunn
2018-09-02 17:06 ` [PATCH net-next 01/12] net: phy: ste10Xp: Remove wrong SUPPORTED_Pause Andrew Lunn
2018-09-03 17:53 ` Florian Fainelli
2018-09-04 1:20 ` Andrew Lunn
2018-09-02 17:06 ` [PATCH net-next 02/12] net: phy: et1011c: Remove incorrect missing 1000 Half Andrew Lunn
2018-09-03 17:46 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 03/12] net: phy: bcm63xx: Allow to be built with COMPILE_TEST Andrew Lunn
2018-09-03 17:28 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 04/12] net: ethernet: Use phy_set_max_speed() to limit advertised speed Andrew Lunn
2018-09-03 17:31 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 05/12] net: ethernet: genet: Fix speed selection Andrew Lunn
2018-09-03 17:32 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 06/12] net: ethernet: Fix up drivers masking pause support Andrew Lunn
2018-09-03 17:33 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 07/12] net: ethernet: Add helper to remove a supported link mode Andrew Lunn
2018-09-03 17:35 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 08/12] net: ethernet: Add helper for MACs which support asym pause Andrew Lunn
2018-09-03 17:38 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 09/12] net: ethernet: Add helper for MACs which support pause Andrew Lunn
2018-09-03 17:39 ` Florian Fainelli
2018-09-03 19:54 ` Andrew Lunn
2018-09-02 17:06 ` [PATCH net-next 10/12] net: ethernet: Add helper for set_pauseparam for Asym Pause Andrew Lunn
2018-09-03 17:49 ` Florian Fainelli
2018-09-03 19:58 ` Andrew Lunn
2018-09-03 22:30 ` Florian Fainelli
2018-09-02 17:06 ` [PATCH net-next 11/12] net: ethernet: Add helper for set_pauseparam for Pause Andrew Lunn
2018-09-03 17:49 ` Florian Fainelli
2018-09-02 17:06 ` Andrew Lunn [this message]
2018-09-03 17:52 ` [PATCH net-next 12/12] net: ethernet: Add helper to determine if pause configuration is supported Florian Fainelli
2018-09-04 2:44 ` [PATCH net-next 00/12] Preparing for phylib limkmodes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1535908001-18593-13-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).