[PATCH v3 net-next 11/12] net: ethernet: Add helper for set_pauseparam for Pause

[Andrew Lunn <andrew@lunn.ch>]

ethtool can be used to enable/disable pause. Add a helper to configure
the PHY when Pause is supported.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3:
  Fix kerndoc, missing parameter.
v2:
  Rename phy_set_pause() to phy_set_sym_pause()
  Use the bcm63xx_enet.c logic, not fec_main.c
---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c |  7 ++----
 drivers/net/ethernet/freescale/fec_main.c    |  9 ++------
 drivers/net/phy/phy_device.c                 | 23 ++++++++++++++++++++
 include/linux/phy.h                          |  2 ++
 4 files changed, 29 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 9f25667c38e6..02e7dfc1a2ef 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -892,11 +892,8 @@ static int bcm_enet_open(struct net_device *dev)
 		/* mask with MAC supported features */
 		phy_support_sym_pause(phydev);
 		phy_set_max_speed(phydev, SPEED_100);
-
-		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-			phydev->advertising |= SUPPORTED_Pause;
-		else
-			phydev->advertising &= ~SUPPORTED_Pause;
+		phy_set_sym_pause(phydev, priv->pause_rx, priv->pause_rx,
+				  priv->pause_auto);
 
 		phy_attached_info(phydev);
 
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 05ce0903391a..2e0bb90131b6 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2229,13 +2229,8 @@ static int fec_enet_set_pauseparam(struct net_device *ndev,
 	fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0;
 	fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0;
 
-	if (pause->rx_pause || pause->autoneg) {
-		ndev->phydev->supported |= ADVERTISED_Pause;
-		ndev->phydev->advertising |= ADVERTISED_Pause;
-	} else {
-		ndev->phydev->supported &= ~ADVERTISED_Pause;
-		ndev->phydev->advertising &= ~ADVERTISED_Pause;
-	}
+	phy_set_sym_pause(ndev->phydev, pause->rx_pause, pause->tx_pause,
+			  pause->autoneg);
 
 	if (pause->autoneg) {
 		if (netif_running(ndev))
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5732d89c8e37..de95f1e072e9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1810,6 +1810,29 @@ void phy_support_asym_pause(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_support_asym_pause);
 
+/**
+ * phy_set_sym_pause - Configure symmetric Pause
+ * @phydev: target phy_device struct
+ * @rx: Receiver Pause is supported
+ * @tx: Transmit Pause is supported
+ * @autoneg: Auto neg should be used
+ *
+ * Description: Configure advertised Pause support depending on if
+ * receiver pause and pause auto neg is supported. Generally called
+ * from the set_pauseparam .ndo.
+ */
+void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
+		       bool autoneg)
+{
+	phydev->supported &= ~SUPPORTED_Pause;
+
+	if (rx && tx && autoneg)
+		phydev->supported |= SUPPORTED_Pause;
+
+	phydev->advertising = phydev->supported;
+}
+EXPORT_SYMBOL(phy_set_sym_pause);
+
 /**
  * phy_set_asym_pause - Configure Pause and Asym Pause
  * @phydev: target phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e4062ba7472f..8521391ebb20 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1052,6 +1052,8 @@ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
 void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
 void phy_support_sym_pause(struct phy_device *phydev);
 void phy_support_asym_pause(struct phy_device *phydev);
+void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
+		       bool autoneg);
 void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
 
 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
-- 
2.19.0.rc1