[PATH RFC net-next 3/8] net: phy: Add helper to convert MII ADV register to a linkmode

[Andrew Lunn <andrew@lunn.ch>]

The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE
register in the PHY. Since this changes the state of the PHY, we need
to make the same change to phydev->advertising. Add a helper which can
convert the register value to a linkmode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 include/linux/mii.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/mii.h b/include/linux/mii.h
index 567047ef0309..8c7da9473ad9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -303,6 +303,37 @@ static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
 	return result | mii_adv_to_ethtool_adv_x(lpa);
 }
 
+/**
+ * mii_adv_to_linkmode_adv_t
+ * @advertising:pointer to destination link mode.
+ * @adv: value of the MII_ADVERTISE register
+ *
+ * A small helper function that translates MII_ADVERTISE bits
+ * to linkmode advertisement settings.
+ */
+static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
+					     u32 adv)
+{
+	linkmode_zero(advertising);
+
+	if (adv & ADVERTISE_10HALF)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				 advertising);
+	if (adv & ADVERTISE_10FULL)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				 advertising);
+	if (adv & ADVERTISE_100HALF)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				 advertising);
+	if (adv & ADVERTISE_100FULL)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 advertising);
+	if (adv & ADVERTISE_PAUSE_CAP)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising);
+	if (adv & ADVERTISE_PAUSE_ASYM)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising);
+}
+
 /**
  * mii_advertise_flowctrl - get flow control advertisement flags
  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
-- 
2.19.0.rc1