From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH net-next 23/23] bnxt_en: Add PCI ID for BCM57508 device.
Date: Sun, 14 Oct 2018 07:02:59 -0400 [thread overview]
Message-ID: <1539514979-2859-24-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1539514979-2859-1-git-send-email-michael.chan@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index f518119..de987cc 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -111,6 +111,7 @@ enum board_idx {
BCM57452,
BCM57454,
BCM5745x_NPAR,
+ BCM57508,
BCM58802,
BCM58804,
BCM58808,
@@ -152,6 +153,7 @@ static const struct {
[BCM57452] = { "Broadcom BCM57452 NetXtreme-E 10Gb/25Gb/40Gb/50Gb Ethernet" },
[BCM57454] = { "Broadcom BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb Ethernet" },
[BCM5745x_NPAR] = { "Broadcom BCM5745x NetXtreme-E Ethernet Partition" },
+ [BCM57508] = { "Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet" },
[BCM58802] = { "Broadcom BCM58802 NetXtreme-S 10Gb/25Gb/40Gb/50Gb Ethernet" },
[BCM58804] = { "Broadcom BCM58804 NetXtreme-S 10Gb/25Gb/40Gb/50Gb/100Gb Ethernet" },
[BCM58808] = { "Broadcom BCM58808 NetXtreme-S 10Gb/25Gb/40Gb/50Gb/100Gb Ethernet" },
@@ -196,6 +198,7 @@ static const struct pci_device_id bnxt_pci_tbl[] = {
{ PCI_VDEVICE(BROADCOM, 0x16ef), .driver_data = BCM57416_NPAR },
{ PCI_VDEVICE(BROADCOM, 0x16f0), .driver_data = BCM58808 },
{ PCI_VDEVICE(BROADCOM, 0x16f1), .driver_data = BCM57452 },
+ { PCI_VDEVICE(BROADCOM, 0x1750), .driver_data = BCM57508 },
{ PCI_VDEVICE(BROADCOM, 0xd802), .driver_data = BCM58802 },
{ PCI_VDEVICE(BROADCOM, 0xd804), .driver_data = BCM58804 },
#ifdef CONFIG_BNXT_SRIOV
--
2.5.1
next prev parent reply other threads:[~2018-10-14 18:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-14 11:02 [PATCH net-next 00/23] bnxt_en: Add support for new 57500 chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 01/23] bnxt_en: Update firmware interface spec. to 1.10.0.3 Michael Chan
2018-10-14 11:02 ` [PATCH net-next 02/23] bnxt_en: Add additional extended port statistics Michael Chan
2018-10-14 11:02 ` [PATCH net-next 03/23] bnxt_en: Add maximum extended request length fw message support Michael Chan
2018-10-14 11:02 ` [PATCH net-next 04/23] bnxt_en: Update interrupt coalescing logic Michael Chan
2018-10-14 11:02 ` [PATCH net-next 05/23] bnxt_en: Refactor bnxt_ring_struct Michael Chan
2018-10-14 11:02 ` [PATCH net-next 06/23] bnxt_en: Add new flags to setup new page table PTE bits on newer devices Michael Chan
2018-10-14 11:02 ` [PATCH net-next 07/23] bnxt_en: Check context memory requirements from firmware Michael Chan
2018-10-14 11:02 ` [PATCH net-next 08/23] bnxt_en: Configure context memory on new devices Michael Chan
2018-10-14 11:02 ` [PATCH net-next 09/23] bnxt_en: Add 57500 new chip ID and basic structures Michael Chan
2018-10-14 11:02 ` [PATCH net-next 10/23] bnxt_en: Re-structure doorbells Michael Chan
2018-10-14 11:02 ` [PATCH net-next 11/23] bnxt_en: Adjust MSIX and ring groups for 57500 series chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 12/23] bnxt_en: Modify the ring reservation functions " Michael Chan
2018-10-14 11:02 ` [PATCH net-next 13/23] bnxt_en: Allocate completion ring structures " Michael Chan
2018-10-14 11:02 ` [PATCH net-next 14/23] bnxt_en: Add helper functions to get firmware CP ring ID Michael Chan
2018-10-14 11:02 ` [PATCH net-next 15/23] bnxt_en: Modify bnxt_ring_alloc_send_msg() to support 57500 chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 16/23] bnxt_en: Allocate/Free CP rings for 57500 series chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 17/23] bnxt_en: Increase RSS context array count and skip ring groups on 57500 chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 18/23] bnxt_en: Add RSS support for " Michael Chan
2018-10-14 11:02 ` [PATCH net-next 19/23] bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path Michael Chan
2018-10-14 11:02 ` [PATCH net-next 20/23] bnxt_en: Add coalescing setup for 57500 chips Michael Chan
2018-10-14 11:02 ` [PATCH net-next 21/23] bnxt_en: Refactor bnxt_poll_work() Michael Chan
2018-10-14 11:02 ` [PATCH net-next 22/23] bnxt_en: Add new NAPI poll function for 57500 chips Michael Chan
2018-10-14 11:02 ` Michael Chan [this message]
2018-10-16 5:47 ` [PATCH net-next 00/23] bnxt_en: Add support for new " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539514979-2859-24-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).