From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: arnd@arndb.de, linux-soc@vger.kernel.org,
Vamsi Attunuru <vamsi.attunuru@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH 09/17] octeontx2-af: Support for VTAG strip and capture
Date: Fri, 19 Oct 2018 19:07:30 +0530 [thread overview]
Message-ID: <1539956258-29377-10-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1539956258-29377-1-git-send-email-sunil.kovvuri@gmail.com>
From: Vamsi Attunuru <vamsi.attunuru@marvell.com>
Added support for PF/VF drivers to configure NIX to
capture and/or strip VLAN tag from ingress packets.
Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 35 ++++++++++++-
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 3 ++
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 59 ++++++++++++++++++++++
.../net/ethernet/marvell/octeontx2/af/rvu_struct.h | 5 ++
4 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index f8efeaa..b60ac9d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -156,7 +156,8 @@ M(NIX_HWCTX_DISABLE, 0x8003, hwctx_disable_req, msg_rsp) \
M(NIX_TXSCH_ALLOC, 0x8004, nix_txsch_alloc_req, nix_txsch_alloc_rsp) \
M(NIX_TXSCH_FREE, 0x8005, nix_txsch_free_req, msg_rsp) \
M(NIX_TXSCHQ_CFG, 0x8006, nix_txschq_config, msg_rsp) \
-M(NIX_STATS_RST, 0x8007, msg_req, msg_rsp)
+M(NIX_STATS_RST, 0x8007, msg_req, msg_rsp) \
+M(NIX_VTAG_CFG, 0x8008, nix_vtag_config, msg_rsp)
/* Messages initiated by AF (range 0xC00 - 0xDFF) */
#define MBOX_UP_CGX_MESSAGES \
@@ -462,4 +463,36 @@ struct nix_txschq_config {
u64 regval[MAX_REGS_PER_MBOX_MSG];
};
+struct nix_vtag_config {
+ struct mbox_msghdr hdr;
+ u8 vtag_size;
+ /* cfg_type is '0' for tx vlan cfg
+ * cfg_type is '1' for rx vlan cfg
+ */
+ u8 cfg_type;
+ union {
+ /* valid when cfg_type is '0' */
+ struct {
+ /* tx vlan0 tag(C-VLAN) */
+ u64 vlan0;
+ /* tx vlan1 tag(S-VLAN) */
+ u64 vlan1;
+ /* insert tx vlan tag */
+ u8 insert_vlan :1;
+ /* insert tx double vlan tag */
+ u8 double_vlan :1;
+ } tx;
+
+ /* valid when cfg_type is '1' */
+ struct {
+ /* rx vtag type index */
+ u8 vtag_type;
+ /* rx vtag strip */
+ u8 strip_vtag :1;
+ /* rx vtag capture */
+ u8 capture_vtag :1;
+ } rx;
+ };
+};
+
#endif /* MBOX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index b39400d..1e85e80 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -319,6 +319,9 @@ int rvu_mbox_handler_NIX_TXSCHQ_CFG(struct rvu *rvu,
struct msg_rsp *rsp);
int rvu_mbox_handler_NIX_STATS_RST(struct rvu *rvu, struct msg_req *req,
struct msg_rsp *rsp);
+int rvu_mbox_handler_NIX_VTAG_CFG(struct rvu *rvu,
+ struct nix_vtag_config *req,
+ struct msg_rsp *rsp);
/* NPC APIs */
int rvu_npc_init(struct rvu *rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8333283..7de5417 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -1143,6 +1143,65 @@ int rvu_mbox_handler_NIX_TXSCHQ_CFG(struct rvu *rvu,
return 0;
}
+static int nix_rx_vtag_cfg(struct rvu *rvu, int nixlf, int blkaddr,
+ struct nix_vtag_config *req)
+{
+ u64 regval = 0;
+
+#define NIX_VTAGTYPE_MAX 0x8ull
+#define NIX_VTAGSIZE_MASK 0x7ull
+#define NIX_VTAGSTRIP_CAP_MASK 0x30ull
+
+ if (req->rx.vtag_type >= NIX_VTAGTYPE_MAX ||
+ req->vtag_size > VTAGSIZE_T8)
+ return -EINVAL;
+
+ regval = rvu_read64(rvu, blkaddr,
+ NIX_AF_LFX_RX_VTAG_TYPEX(nixlf, req->rx.vtag_type));
+
+ if (req->rx.strip_vtag && req->rx.capture_vtag)
+ regval |= BIT_ULL(4) | BIT_ULL(5);
+ else if (req->rx.strip_vtag)
+ regval |= BIT_ULL(4);
+ else
+ regval &= ~(BIT_ULL(4) | BIT_ULL(5));
+
+ regval &= ~NIX_VTAGSIZE_MASK;
+ regval |= req->vtag_size & NIX_VTAGSIZE_MASK;
+
+ rvu_write64(rvu, blkaddr,
+ NIX_AF_LFX_RX_VTAG_TYPEX(nixlf, req->rx.vtag_type), regval);
+ return 0;
+}
+
+int rvu_mbox_handler_NIX_VTAG_CFG(struct rvu *rvu,
+ struct nix_vtag_config *req,
+ struct msg_rsp *rsp)
+{
+ struct rvu_hwinfo *hw = rvu->hw;
+ u16 pcifunc = req->hdr.pcifunc;
+ int blkaddr, nixlf, err;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, pcifunc);
+ if (blkaddr < 0)
+ return NIX_AF_ERR_AF_LF_INVALID;
+
+ nixlf = rvu_get_lf(rvu, &hw->block[blkaddr], pcifunc, 0);
+ if (nixlf < 0)
+ return NIX_AF_ERR_AF_LF_INVALID;
+
+ if (req->cfg_type) {
+ err = nix_rx_vtag_cfg(rvu, nixlf, blkaddr, req);
+ if (err)
+ return NIX_AF_ERR_PARAM;
+ } else {
+ /* TODO: handle tx vtag configuration */
+ return 0;
+ }
+
+ return 0;
+}
+
static int nix_setup_mce(struct rvu *rvu, int mce, u8 op,
u16 pcifunc, int next, bool eol)
{
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
index c331b237..bb2836e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
@@ -879,4 +879,9 @@ struct nix_lso_format {
#endif
};
+/* NIX VTAG size */
+enum nix_vtag_size {
+ VTAGSIZE_T4 = 0x0,
+ VTAGSIZE_T8 = 0x1,
+};
#endif /* RVU_STRUCT_H */
--
2.7.4
next prev parent reply other threads:[~2018-10-19 21:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 13:37 [PATCH 00/17] octeontx2-af: NPC parser and NIX blocks initialization sunil.kovvuri
2018-10-19 13:37 ` [PATCH 01/17] octeontx2-af: NIX Tx scheduler queues alloc/free sunil.kovvuri
2018-10-19 13:37 ` [PATCH 02/17] octeontx2-af: NIX Tx scheduler queue config support sunil.kovvuri
2018-10-19 13:37 ` [PATCH 03/17] octeontx2-af: Reset NIXLF's Rx/Tx stats sunil.kovvuri
2018-10-19 13:37 ` [PATCH 04/17] octeontx2-af: Add NPC KPU profile sunil.kovvuri
2018-10-19 13:37 ` [PATCH 05/17] octeontx2-af: Config NPC KPU engines with parser profile sunil.kovvuri
2018-10-19 13:37 ` [PATCH 06/17] octeontx2-af: Config pkind for CGX mapped PFs sunil.kovvuri
2018-10-19 13:37 ` [PATCH 07/17] octeontx2-af: Broadcast packet replication support sunil.kovvuri
2018-10-19 13:37 ` [PATCH 08/17] octeontx2-af: Update bcast list upon NIXLF alloc/free sunil.kovvuri
2018-10-19 13:37 ` sunil.kovvuri [this message]
2018-10-19 13:37 ` [PATCH 10/17] octeontx2-af: Enable packet length and csum validation sunil.kovvuri
2018-10-19 13:37 ` [PATCH 11/17] octeontx2-af: NPC MCAM and LDATA extract minimal configuration sunil.kovvuri
2018-10-19 13:37 ` [PATCH 12/17] octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response sunil.kovvuri
2018-10-19 13:37 ` [PATCH 13/17] octeontx2-af: Install ucast and bcast pkt forwarding rules sunil.kovvuri
2018-10-22 16:18 ` kbuild test robot
2018-10-19 13:37 ` [PATCH 14/17] octeontx2-af: NIX Rx flowkey configuration for RSS sunil.kovvuri
2018-10-19 13:37 ` [PATCH 15/17] octeontx2-af: Support for changing RSS algorithm sunil.kovvuri
2018-10-19 13:37 ` [PATCH 16/17] octeontx2-af: Support for setting MAC address sunil.kovvuri
2018-10-19 13:37 ` [PATCH 17/17] octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes sunil.kovvuri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539956258-29377-10-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sgoutham@marvell.com \
--cc=vamsi.attunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).