From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: arnd@arndb.de, linux-soc@vger.kernel.org,
Santosh Shukla <sshukla@marvell.com>,
Yuri Tolstov <ytolstov@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v3 10/21] octeontx2-af: Add MKEX default profile
Date: Mon, 19 Nov 2018 16:17:32 +0530 [thread overview]
Message-ID: <1542624463-5868-11-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1542624463-5868-1-git-send-email-sunil.kovvuri@gmail.com>
From: Santosh Shukla <sshukla@marvell.com>
Added basic default MKEX profile. This profile tells
hardware what data to extract from packet and where to
place it (bit offset) in final KEY generated for the
parsed packet. Based on the bit placement of the packet
data, MCAM entries have to programmed for matching.
Also added a msg to retrieve this MKEX profile from PF/VF
which inturn can process it to determine how MCAM entry
has to be populated.
Signed-off-by: Santosh Shukla <sshukla@marvell.com>
Signed-off-by: Yuri Tolstov <ytolstov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 19 +++
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 2 +
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 155 +++++++++++++++++----
3 files changed, 151 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index bc10110..bef1605 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -176,6 +176,8 @@ M(NPC_MCAM_COUNTER_STATS, 0x600a, npc_mcam_counter_stats, \
M(NPC_MCAM_ALLOC_AND_WRITE_ENTRY, 0x600b, npc_mcam_alloc_and_write_entry, \
npc_mcam_alloc_and_write_entry_req, \
npc_mcam_alloc_and_write_entry_rsp) \
+M(NPC_GET_KEX_CFG, 0x600c, npc_get_kex_cfg, \
+ msg_req, npc_get_kex_cfg_rsp) \
/* NIX mbox IDs (range 0x8000 - 0xFFFF) */ \
M(NIX_LF_ALLOC, 0x8000, nix_lf_alloc, \
nix_lf_alloc_req, nix_lf_alloc_rsp) \
@@ -699,4 +701,21 @@ struct npc_mcam_alloc_and_write_entry_rsp {
u16 cntr;
};
+struct npc_get_kex_cfg_rsp {
+ struct mbox_msghdr hdr;
+ u64 rx_keyx_cfg; /* NPC_AF_INTF(0)_KEX_CFG */
+ u64 tx_keyx_cfg; /* NPC_AF_INTF(1)_KEX_CFG */
+#define NPC_MAX_INTF 2
+#define NPC_MAX_LID 8
+#define NPC_MAX_LT 16
+#define NPC_MAX_LD 2
+#define NPC_MAX_LFL 16
+ /* NPC_AF_KEX_LDATA(0..1)_FLAGS_CFG */
+ u64 kex_ld_flags[NPC_MAX_LD];
+ /* NPC_AF_INTF(0..1)_LID(0..7)_LT(0..15)_LD(0..1)_CFG */
+ u64 intf_lid_lt_ld[NPC_MAX_INTF][NPC_MAX_LID][NPC_MAX_LT][NPC_MAX_LD];
+ /* NPC_AF_INTF(0..1)_LDATA(0..1)_FLAGS(0..15)_CFG */
+ u64 intf_ld_flags[NPC_MAX_INTF][NPC_MAX_LD][NPC_MAX_LFL];
+};
+
#endif /* MBOX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index ca13c16..93a74b6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -415,4 +415,6 @@ int rvu_mbox_handler_npc_mcam_counter_stats(struct rvu *rvu,
int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
struct npc_mcam_alloc_and_write_entry_req *req,
struct npc_mcam_alloc_and_write_entry_rsp *rsp);
+int rvu_mbox_handler_npc_get_kex_cfg(struct rvu *rvu, struct msg_req *req,
+ struct npc_get_kex_cfg_rsp *rsp);
#endif /* RVU_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index b74e5a6..d749611 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -427,9 +427,28 @@ void rvu_npc_install_bcast_match_entry(struct rvu *rvu, u16 pcifunc,
index = npc_get_nixlf_mcam_index(mcam, pcifunc,
nixlf, NIXLF_BCAST_ENTRY);
- /* Check for L2B bit and LMAC channel */
- entry.kw[0] = BIT_ULL(25) | chan;
- entry.kw_mask[0] = BIT_ULL(25) | 0xFFFULL;
+ /* Check for L2B bit and LMAC channel
+ * NOTE: Since MKEX default profile(a reduced version intended to
+ * accommodate more capability but igoring few bits) a stap-gap
+ * approach.
+ * Since we care for L2B which by HRM NPC_PARSE_KEX_S at BIT_POS[25], So
+ * moved to BIT_POS[13], ignoring ERRCODE, ERRLEV as we'll loose out
+ * on capability features needed for CoS (/from ODP PoV) e.g: VLAN,
+ * DSCP.
+ *
+ * Reduced layout of MKEX default profile -
+ * Includes following are (i.e.CHAN, L2/3{B/M}, LA, LB, LC, LD):
+ *
+ * BIT_POS[31:28] : LD
+ * BIT_POS[27:24] : LC
+ * BIT_POS[23:20] : LB
+ * BIT_POS[19:16] : LA
+ * BIT_POS[15:12] : L3B, L3M, L2B, L2M
+ * BIT_POS[11:00] : CHAN
+ *
+ */
+ entry.kw[0] = BIT_ULL(13) | chan;
+ entry.kw_mask[0] = ~entry.kw[0] & (BIT_ULL(13) | 0xFFFULL);
*(u64 *)&action = 0x00;
#ifdef MCAST_MCE
@@ -538,14 +557,18 @@ void rvu_npc_disable_mcam_entries(struct rvu *rvu, u16 pcifunc, int nixlf)
}
}
-#define LDATA_EXTRACT_CONFIG(intf, lid, ltype, ld, cfg) \
+#define SET_KEX_LD(intf, lid, ltype, ld, cfg) \
rvu_write64(rvu, blkaddr, \
NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf, lid, ltype, ld), cfg)
-#define LDATA_FLAGS_CONFIG(intf, ld, flags, cfg) \
+#define SET_KEX_LDFLAGS(intf, ld, flags, cfg) \
rvu_write64(rvu, blkaddr, \
NPC_AF_INTFX_LDATAX_FLAGSX_CFG(intf, ld, flags), cfg)
+#define KEX_LD_CFG(bytesm1, hdr_ofs, ena, flags_ena, key_ofs) \
+ (((bytesm1) << 16) | ((hdr_ofs) << 8) | ((ena) << 7) | \
+ ((flags_ena) << 6) | ((key_ofs) & 0x3F))
+
static void npc_config_ldata_extract(struct rvu *rvu, int blkaddr)
{
struct npc_mcam *mcam = &rvu->hw->mcam;
@@ -561,28 +584,66 @@ static void npc_config_ldata_extract(struct rvu *rvu, int blkaddr)
*/
for (lid = 0; lid < lid_count; lid++) {
for (ltype = 0; ltype < 16; ltype++) {
- LDATA_EXTRACT_CONFIG(NIX_INTF_RX, lid, ltype, 0, 0ULL);
- LDATA_EXTRACT_CONFIG(NIX_INTF_RX, lid, ltype, 1, 0ULL);
- LDATA_EXTRACT_CONFIG(NIX_INTF_TX, lid, ltype, 0, 0ULL);
- LDATA_EXTRACT_CONFIG(NIX_INTF_TX, lid, ltype, 1, 0ULL);
-
- LDATA_FLAGS_CONFIG(NIX_INTF_RX, 0, ltype, 0ULL);
- LDATA_FLAGS_CONFIG(NIX_INTF_RX, 1, ltype, 0ULL);
- LDATA_FLAGS_CONFIG(NIX_INTF_TX, 0, ltype, 0ULL);
- LDATA_FLAGS_CONFIG(NIX_INTF_TX, 1, ltype, 0ULL);
+ SET_KEX_LD(NIX_INTF_RX, lid, ltype, 0, 0ULL);
+ SET_KEX_LD(NIX_INTF_RX, lid, ltype, 1, 0ULL);
+ SET_KEX_LD(NIX_INTF_TX, lid, ltype, 0, 0ULL);
+ SET_KEX_LD(NIX_INTF_TX, lid, ltype, 1, 0ULL);
+
+ SET_KEX_LDFLAGS(NIX_INTF_RX, 0, ltype, 0ULL);
+ SET_KEX_LDFLAGS(NIX_INTF_RX, 1, ltype, 0ULL);
+ SET_KEX_LDFLAGS(NIX_INTF_TX, 0, ltype, 0ULL);
+ SET_KEX_LDFLAGS(NIX_INTF_TX, 1, ltype, 0ULL);
}
}
- /* If we plan to extract Outer IPv4 tuple for TCP/UDP pkts
- * then 112bit key is not sufficient
- */
if (mcam->keysize != NPC_MCAM_KEY_X2)
return;
- /* Start placing extracted data/flags from 64bit onwards, for now */
- /* Extract DMAC from the packet */
- cfg = (0x05 << 16) | BIT_ULL(7) | NPC_PARSE_RESULT_DMAC_OFFSET;
- LDATA_EXTRACT_CONFIG(NIX_INTF_RX, NPC_LID_LA, NPC_LT_LA_ETHER, 0, cfg);
+ /* Default MCAM KEX profile */
+ /* Layer A: Ethernet: */
+
+ /* DMAC: 6 bytes, KW1[47:0] */
+ cfg = KEX_LD_CFG(0x05, 0x0, 0x1, 0x0, NPC_PARSE_RESULT_DMAC_OFFSET);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LA, NPC_LT_LA_ETHER, 0, cfg);
+
+ /* Ethertype: 2 bytes, KW0[47:32] */
+ cfg = KEX_LD_CFG(0x01, 0xc, 0x1, 0x0, 0x4);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LA, NPC_LT_LA_ETHER, 1, cfg);
+
+ /* Layer B: Single VLAN (CTAG) */
+ /* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
+ cfg = KEX_LD_CFG(0x03, 0x0, 0x1, 0x0, 0x4);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LB, NPC_LT_LB_CTAG, 0, cfg);
+
+ /* Layer B: Stacked VLAN (STAG|QinQ) */
+ /* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
+ cfg = KEX_LD_CFG(0x03, 0x4, 0x1, 0x0, 0x4);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LB, NPC_LT_LB_STAG, 0, cfg);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LB, NPC_LT_LB_QINQ, 0, cfg);
+
+ /* Layer C: IPv4 */
+ /* SIP+DIP: 8 bytes, KW2[63:0] */
+ cfg = KEX_LD_CFG(0x07, 0xc, 0x1, 0x0, 0x10);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LC, NPC_LT_LC_IP, 0, cfg);
+ /* TOS: 1 byte, KW1[63:56] */
+ cfg = KEX_LD_CFG(0x0, 0x1, 0x1, 0x0, 0xf);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LC, NPC_LT_LC_IP, 1, cfg);
+
+ /* Layer D:UDP */
+ /* SPORT: 2 bytes, KW3[15:0] */
+ cfg = KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LD, NPC_LT_LD_UDP, 0, cfg);
+ /* DPORT: 2 bytes, KW3[31:16] */
+ cfg = KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LD, NPC_LT_LD_UDP, 1, cfg);
+
+ /* Layer D:TCP */
+ /* SPORT: 2 bytes, KW3[15:0] */
+ cfg = KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LD, NPC_LT_LD_TCP, 0, cfg);
+ /* DPORT: 2 bytes, KW3[31:16] */
+ cfg = KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a);
+ SET_KEX_LD(NIX_INTF_RX, NPC_LID_LD, NPC_LT_LD_TCP, 1, cfg);
}
static void npc_config_kpuaction(struct rvu *rvu, int blkaddr,
@@ -898,13 +959,12 @@ int rvu_npc_init(struct rvu *rvu)
BIT_ULL(6) | BIT_ULL(2));
/* Set RX and TX side MCAM search key size.
- * Also enable parse key extract nibbles suchthat except
- * layer E to H, rest of the key is included for MCAM search.
+ * LA..LD (ltype only) + Channel
*/
rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_RX),
- ((keyz & 0x3) << 32) | ((1ULL << 20) - 1));
+ ((keyz & 0x3) << 32) | 0x49247);
rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_TX),
- ((keyz & 0x3) << 32) | ((1ULL << 20) - 1));
+ ((keyz & 0x3) << 32) | ((1ULL << 19) - 1));
err = npc_mcam_rsrcs_init(rvu, blkaddr);
if (err)
@@ -1876,3 +1936,48 @@ int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
return 0;
}
+
+#define GET_KEX_CFG(intf) \
+ rvu_read64(rvu, BLKADDR_NPC, NPC_AF_INTFX_KEX_CFG(intf))
+
+#define GET_KEX_FLAGS(ld) \
+ rvu_read64(rvu, BLKADDR_NPC, NPC_AF_KEX_LDATAX_FLAGS_CFG(ld))
+
+#define GET_KEX_LD(intf, lid, lt, ld) \
+ rvu_read64(rvu, BLKADDR_NPC, \
+ NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf, lid, lt, ld))
+
+#define GET_KEX_LDFLAGS(intf, ld, fl) \
+ rvu_read64(rvu, BLKADDR_NPC, \
+ NPC_AF_INTFX_LDATAX_FLAGSX_CFG(intf, ld, fl))
+
+int rvu_mbox_handler_npc_get_kex_cfg(struct rvu *rvu, struct msg_req *req,
+ struct npc_get_kex_cfg_rsp *rsp)
+{
+ int lid, lt, ld, fl;
+
+ rsp->rx_keyx_cfg = GET_KEX_CFG(NIX_INTF_RX);
+ rsp->tx_keyx_cfg = GET_KEX_CFG(NIX_INTF_TX);
+ for (lid = 0; lid < NPC_MAX_LID; lid++) {
+ for (lt = 0; lt < NPC_MAX_LT; lt++) {
+ for (ld = 0; ld < NPC_MAX_LD; ld++) {
+ rsp->intf_lid_lt_ld[NIX_INTF_RX][lid][lt][ld] =
+ GET_KEX_LD(NIX_INTF_RX, lid, lt, ld);
+ rsp->intf_lid_lt_ld[NIX_INTF_TX][lid][lt][ld] =
+ GET_KEX_LD(NIX_INTF_TX, lid, lt, ld);
+ }
+ }
+ }
+ for (ld = 0; ld < NPC_MAX_LD; ld++)
+ rsp->kex_ld_flags[ld] = GET_KEX_FLAGS(ld);
+
+ for (ld = 0; ld < NPC_MAX_LD; ld++) {
+ for (fl = 0; fl < NPC_MAX_LFL; fl++) {
+ rsp->intf_ld_flags[NIX_INTF_RX][ld][fl] =
+ GET_KEX_LDFLAGS(NIX_INTF_RX, ld, fl);
+ rsp->intf_ld_flags[NIX_INTF_TX][ld][fl] =
+ GET_KEX_LDFLAGS(NIX_INTF_TX, ld, fl);
+ }
+ }
+ return 0;
+}
--
2.7.4
next prev parent reply other threads:[~2018-11-19 21:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 10:47 [PATCH v3 00/21] octeontx2-af: NPC MCAM support and FLR handling sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 01/21] octeontx2-af: Convert mbox handlers APIs to lowercase sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 02/21] octeontx2-af: Support to modify min/max allowed packet lengths sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 03/21] octeontx2-af: Support to get NIX HW constants from AF sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 04/21] octeontx2-af: Relax resource lock into mutex sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 05/21] octeontx2-af: NPC MCAM entry alloc/free support sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 06/21] octeontx2-af: MCAM entry installation support sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 07/21] octeontx2-af: Support for NPC MCAM counters sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 08/21] octeontx2-af: Map or unmap NPC MCAM entry and counter sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 09/21] octeontx2-af: Alloc and config NPC MCAM entry at a time sunil.kovvuri
2018-11-19 10:47 ` sunil.kovvuri [this message]
2018-11-19 10:47 ` [PATCH v3 11/21] octeontx2-af: Support to enable/disable default MCAM entries sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 12/21] octeontx2-af: Add support for stripping STAG/CTAG sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 13/21] octeontx2-af: Verify NPA/SSO/NIX PF_FUNC mapping sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 14/21] octeontx2-af: Add FLR interrupt handler sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 15/21] octeontx2-af: Teardown NPA, NIX LF upon receiving FLR sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 16/21] octeontx2-af: Mbox communication support btw AF and it's VFs sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 17/21] octeontx2-af: Enable sriov on AF to create VFs sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 18/21] octeontx2-af: Configure AF VFs to talk over LBK channels sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 19/21] octeontx2-af: Add FLR handling support for AF's VFs sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 20/21] octeontx2-af: Add interrupt handlers for Master Enable event sunil.kovvuri
2018-11-19 10:47 ` [PATCH v3 21/21] octeontx2-af: Workarounds for HW errata sunil.kovvuri
2018-11-20 1:56 ` [PATCH v3 00/21] octeontx2-af: NPC MCAM support and FLR handling David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542624463-5868-11-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sgoutham@marvell.com \
--cc=sshukla@marvell.com \
--cc=ytolstov@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).