From: Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"davem@davemloft.net" <davem@davemloft.net>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH net-next 6/8] dpaa2-eth: Add support for XDP_TX
Date: Fri, 23 Nov 2018 16:56:35 +0000 [thread overview]
Message-ID: <1542992186-26028-7-git-send-email-ruxandra.radulescu@nxp.com> (raw)
In-Reply-To: <1542992186-26028-1-git-send-email-ruxandra.radulescu@nxp.com>
Send frames back on the same port for XDP_TX action.
Since the frame buffers have been allocated by us, we can recycle
them directly into the Rx buffer pool instead of requesting a
confirmation frame upon transmission complete.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 43 +++++++++++++++++++++++-
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 2 ++
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 1bdcd71..3dabee0 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -240,14 +240,50 @@ static void xdp_release_buf(struct dpaa2_eth_priv *priv,
ch->xdp.drop_cnt = 0;
}
+static int xdp_enqueue(struct dpaa2_eth_priv *priv, struct dpaa2_fd *fd,
+ void *buf_start, u16 queue_id)
+{
+ struct dpaa2_eth_fq *fq;
+ struct dpaa2_faead *faead;
+ u32 ctrl, frc;
+ int i, err;
+
+ /* Mark the egress frame hardware annotation area as valid */
+ frc = dpaa2_fd_get_frc(fd);
+ dpaa2_fd_set_frc(fd, frc | DPAA2_FD_FRC_FAEADV);
+ dpaa2_fd_set_ctrl(fd, DPAA2_FD_CTRL_ASAL);
+
+ /* Instruct hardware to release the FD buffer directly into
+ * the buffer pool once transmission is completed, instead of
+ * sending a Tx confirmation frame to us
+ */
+ ctrl = DPAA2_FAEAD_A4V | DPAA2_FAEAD_A2V | DPAA2_FAEAD_EBDDV;
+ faead = dpaa2_get_faead(buf_start, false);
+ faead->ctrl = cpu_to_le32(ctrl);
+ faead->conf_fqid = 0;
+
+ fq = &priv->fq[queue_id];
+ for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) {
+ err = dpaa2_io_service_enqueue_qd(fq->channel->dpio,
+ priv->tx_qdid, 0,
+ fq->tx_qdbin, fd);
+ if (err != -EBUSY)
+ break;
+ }
+
+ return err;
+}
+
static u32 run_xdp(struct dpaa2_eth_priv *priv,
struct dpaa2_eth_channel *ch,
+ struct dpaa2_eth_fq *rx_fq,
struct dpaa2_fd *fd, void *vaddr)
{
dma_addr_t addr = dpaa2_fd_get_addr(fd);
struct bpf_prog *xdp_prog;
struct xdp_buff xdp;
u32 xdp_act = XDP_PASS;
+ int err;
rcu_read_lock();
@@ -269,6 +305,11 @@ static u32 run_xdp(struct dpaa2_eth_priv *priv,
switch (xdp_act) {
case XDP_PASS:
break;
+ case XDP_TX:
+ err = xdp_enqueue(priv, fd, vaddr, rx_fq->flowid);
+ if (err)
+ xdp_release_buf(priv, ch, addr);
+ break;
default:
bpf_warn_invalid_xdp_action(xdp_act);
case XDP_ABORTED:
@@ -317,7 +358,7 @@ static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv,
percpu_extras = this_cpu_ptr(priv->percpu_extras);
if (fd_format == dpaa2_fd_single) {
- xdp_act = run_xdp(priv, ch, (struct dpaa2_fd *)fd, vaddr);
+ xdp_act = run_xdp(priv, ch, fq, (struct dpaa2_fd *)fd, vaddr);
if (xdp_act != XDP_PASS)
return;
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
index 23cf9d9..5530a0e 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -139,7 +139,9 @@ struct dpaa2_faead {
};
#define DPAA2_FAEAD_A2V 0x20000000
+#define DPAA2_FAEAD_A4V 0x08000000
#define DPAA2_FAEAD_UPDV 0x00001000
+#define DPAA2_FAEAD_EBDDV 0x00002000
#define DPAA2_FAEAD_UPD 0x00000010
/* Accessors for the hardware annotation fields that we use */
--
2.7.4
next prev parent reply other threads:[~2018-11-24 3:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-23 16:56 [PATCH net-next 0/8] dpaa2-eth: Introduce XDP support Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 2/8] dpaa2-eth: Allow XDP header adjustments Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 1/8] dpaa2-eth: Add basic XDP support Ioana Ciocoi Radulescu
2018-11-24 21:49 ` David Ahern
2018-11-26 7:32 ` Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 3/8] dpaa2-eth: Move function Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 5/8] dpaa2-eth: Map Rx buffers as bidirectional Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 4/8] dpaa2-eth: Release buffers back to pool on XDP_DROP Ioana Ciocoi Radulescu
2018-11-23 16:56 ` Ioana Ciocoi Radulescu [this message]
2018-11-23 16:56 ` [PATCH net-next 7/8] dpaa2-eth: Cleanup channel stats Ioana Ciocoi Radulescu
2018-11-23 16:56 ` [PATCH net-next 8/8] dpaa2-eth: Add xdp counters Ioana Ciocoi Radulescu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542992186-26028-7-git-send-email-ruxandra.radulescu@nxp.com \
--to=ruxandra.radulescu@nxp.com \
--cc=davem@davemloft.net \
--cc=ioana.ciornei@nxp.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).