public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Roopa Prabhu <roopa@cumulusnetworks.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH net-next v2 3/3] vxlan: move flag sets to use a helper func
Date: Wed, 28 Nov 2018 14:27:59 -0800	[thread overview]
Message-ID: <1543444079-29883-4-git-send-email-roopa@cumulusnetworks.com> (raw)
In-Reply-To: <1543444079-29883-1-git-send-email-roopa@cumulusnetworks.com>

From: Roopa Prabhu <roopa@cumulusnetworks.com>

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
---
 drivers/net/vxlan.c | 95 ++++++++++++++++++++++++-----------------------------
 1 file changed, 43 insertions(+), 52 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 4cb6b50..47671fd 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3374,6 +3374,23 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	return err;
 }
 
+/* Set/clear flags based on attribute */
+static void vxlan_nl2flag(struct vxlan_config *conf, struct nlattr *tb[],
+			  int attrtype, unsigned long mask)
+{
+	unsigned long flags;
+
+	if (!tb[attrtype])
+		return;
+
+	if (nla_get_u8(tb[attrtype]))
+		flags = conf->flags | mask;
+	else
+		flags = conf->flags & ~mask;
+
+	conf->flags = flags;
+}
+
 static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[],
 			 struct net_device *dev, struct vxlan_config *conf,
 			 bool changelink, struct netlink_ext_ack *extack)
@@ -3458,45 +3475,27 @@ static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[],
 	if (data[IFLA_VXLAN_TTL])
 		conf->ttl = nla_get_u8(data[IFLA_VXLAN_TTL]);
 
-	if (data[IFLA_VXLAN_TTL_INHERIT])
-		conf->flags |= VXLAN_F_TTL_INHERIT;
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_TTL_INHERIT,
+		      VXLAN_F_TTL_INHERIT);
 
 	if (data[IFLA_VXLAN_LABEL])
 		conf->label = nla_get_be32(data[IFLA_VXLAN_LABEL]) &
 			     IPV6_FLOWLABEL_MASK;
 
-	if (data[IFLA_VXLAN_LEARNING]) {
-		if (nla_get_u8(data[IFLA_VXLAN_LEARNING]))
-			conf->flags |= VXLAN_F_LEARN;
-		else
-			conf->flags &= ~VXLAN_F_LEARN;
-	} else if (!changelink) {
+	if (data[IFLA_VXLAN_LEARNING])
+		vxlan_nl2flag(conf, data, IFLA_VXLAN_LEARNING,
+			      VXLAN_F_LEARN);
+	else if (!changelink)
 		/* default to learn on a new device */
 		conf->flags |= VXLAN_F_LEARN;
-	}
 
 	if (data[IFLA_VXLAN_AGEING])
 		conf->age_interval = nla_get_u32(data[IFLA_VXLAN_AGEING]);
 
-	if (data[IFLA_VXLAN_PROXY]) {
-		if (nla_get_u8(data[IFLA_VXLAN_PROXY]))
-			conf->flags |= VXLAN_F_PROXY;
-	}
-
-	if (data[IFLA_VXLAN_RSC]) {
-		if (nla_get_u8(data[IFLA_VXLAN_RSC]))
-			conf->flags |= VXLAN_F_RSC;
-	}
-
-	if (data[IFLA_VXLAN_L2MISS]) {
-		if (nla_get_u8(data[IFLA_VXLAN_L2MISS]))
-			conf->flags |= VXLAN_F_L2MISS;
-	}
-
-	if (data[IFLA_VXLAN_L3MISS]) {
-		if (nla_get_u8(data[IFLA_VXLAN_L3MISS]))
-			conf->flags |= VXLAN_F_L3MISS;
-	}
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_PROXY, VXLAN_F_PROXY);
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_RSC, VXLAN_F_RSC);
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_L2MISS, VXLAN_F_L2MISS);
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_L3MISS, VXLAN_F_L3MISS);
 
 	if (data[IFLA_VXLAN_LIMIT]) {
 		if (changelink) {
@@ -3514,8 +3513,8 @@ static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[],
 					    "Cannot change metadata flag");
 			return -EOPNOTSUPP;
 		}
-		if (nla_get_u8(data[IFLA_VXLAN_COLLECT_METADATA]))
-			conf->flags |= VXLAN_F_COLLECT_METADATA;
+		vxlan_nl2flag(conf, data, IFLA_VXLAN_COLLECT_METADATA,
+			      VXLAN_F_COLLECT_METADATA);
 	}
 
 	if (data[IFLA_VXLAN_PORT_RANGE]) {
@@ -3553,34 +3552,26 @@ static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[],
 			conf->flags |= VXLAN_F_UDP_ZERO_CSUM_TX;
 	}
 
-	if (data[IFLA_VXLAN_UDP_ZERO_CSUM6_TX]) {
-		if (nla_get_u8(data[IFLA_VXLAN_UDP_ZERO_CSUM6_TX]))
-			conf->flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
-	}
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_UDP_ZERO_CSUM6_TX,
+		      VXLAN_F_UDP_ZERO_CSUM6_TX);
 
-	if (data[IFLA_VXLAN_UDP_ZERO_CSUM6_RX]) {
-		if (nla_get_u8(data[IFLA_VXLAN_UDP_ZERO_CSUM6_RX]))
-			conf->flags |= VXLAN_F_UDP_ZERO_CSUM6_RX;
-	}
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_UDP_ZERO_CSUM6_RX,
+		      VXLAN_F_UDP_ZERO_CSUM6_RX);
 
-	if (data[IFLA_VXLAN_REMCSUM_TX]) {
-		if (nla_get_u8(data[IFLA_VXLAN_REMCSUM_TX]))
-			conf->flags |= VXLAN_F_REMCSUM_TX;
-	}
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_REMCSUM_TX,
+		      VXLAN_F_REMCSUM_TX);
 
-	if (data[IFLA_VXLAN_REMCSUM_RX]) {
-		if (nla_get_u8(data[IFLA_VXLAN_REMCSUM_RX]))
-			conf->flags |= VXLAN_F_REMCSUM_RX;
-	}
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_REMCSUM_RX,
+		      VXLAN_F_REMCSUM_RX);
 
-	if (data[IFLA_VXLAN_GBP])
-		conf->flags |= VXLAN_F_GBP;
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_GBP,
+		      VXLAN_F_GBP);
 
-	if (data[IFLA_VXLAN_GPE])
-		conf->flags |= VXLAN_F_GPE;
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_GPE,
+		      VXLAN_F_GPE);
 
-	if (data[IFLA_VXLAN_REMCSUM_NOPARTIAL])
-		conf->flags |= VXLAN_F_REMCSUM_NOPARTIAL;
+	vxlan_nl2flag(conf, data, IFLA_VXLAN_REMCSUM_NOPARTIAL,
+		      VXLAN_F_REMCSUM_NOPARTIAL);
 
 	if (tb[IFLA_MTU]) {
 		if (changelink) {
-- 
2.1.4

  parent reply	other threads:[~2018-11-29  9:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 22:27 [PATCH net-next v2 0/3] vxlan: a few minor cleanups Roopa Prabhu
2018-11-28 22:27 ` [PATCH net-next v2 1/3] vxlan: support changelink for a few more attributes Roopa Prabhu
2018-11-29 13:56   ` Sabrina Dubroca
2018-11-29 15:33     ` Roopa Prabhu
2018-11-29 15:51       ` Sabrina Dubroca
2018-11-28 22:27 ` [PATCH net-next v2 2/3] vxlan: extack support for some changelink cases Roopa Prabhu
2018-12-01  0:31   ` kbuild test robot
2018-11-28 22:27 ` Roopa Prabhu [this message]
2018-11-29 14:19   ` [PATCH net-next v2 3/3] vxlan: move flag sets to use a helper func Sabrina Dubroca
2018-11-29 15:27     ` Roopa Prabhu
2018-11-29 15:55       ` Sabrina Dubroca
2018-11-29 16:05         ` Roopa Prabhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1543444079-29883-4-git-send-email-roopa@cumulusnetworks.com \
    --to=roopa@cumulusnetworks.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox