[PATCH net-next 06/13] bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.

[Michael Chan <michael.chan@broadcom.com>]

When bringing up a device, the code checks to see if the number of
MSIX has changed.  pci_disable_msix() should be called first before
changing the number of reserved NQs/CMPL rings.  This ensures that
the MSIX vectors associated with the NQs/CMPL rings are still
properly mapped when pci_disable_msix() masks the vectors.

This patch will prevent errors when RDMA support is added for the new
57500 chips.  When the RDMA driver shuts down, the number of NQs is
decreased and we must use the new sequence to prevent MSIX errors.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7722df2..313a940 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7241,23 +7241,26 @@ static void bnxt_clear_int_mode(struct bnxt *bp)
 int bnxt_reserve_rings(struct bnxt *bp)
 {
 	int tcs = netdev_get_num_tc(bp->dev);
+	bool reinit_irq = false;
 	int rc;
 
 	if (!bnxt_need_reserve_rings(bp))
 		return 0;
 
-	rc = __bnxt_reserve_rings(bp);
-	if (rc) {
-		netdev_err(bp->dev, "ring reservation failure rc: %d\n", rc);
-		return rc;
-	}
 	if (BNXT_NEW_RM(bp) && (bnxt_get_num_msix(bp) != bp->total_irqs)) {
 		bnxt_ulp_irq_stop(bp);
 		bnxt_clear_int_mode(bp);
-		rc = bnxt_init_int_mode(bp);
+		reinit_irq = true;
+	}
+	rc = __bnxt_reserve_rings(bp);
+	if (reinit_irq) {
+		if (!rc)
+			rc = bnxt_init_int_mode(bp);
 		bnxt_ulp_irq_restart(bp, rc);
-		if (rc)
-			return rc;
+	}
+	if (rc) {
+		netdev_err(bp->dev, "ring reservation/IRQ init failure rc: %d\n", rc);
+		return rc;
 	}
 	if (tcs && (bp->tx_nr_rings_per_tc * tcs != bp->tx_nr_rings)) {
 		netdev_err(bp->dev, "tx ring reservation failure\n");
-- 
2.5.1