From: Tariq Toukan <tariqt@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Eran Ben Elisha <eranbe@mellanox.com>,
Aya Levin <ayal@mellanox.com>, Tariq Toukan <tariqt@mellanox.com>
Subject: [PATCH net 1/2] net/mlx4_core: Add masking for a few queries on HCA caps
Date: Tue, 22 Jan 2019 15:19:44 +0200 [thread overview]
Message-ID: <1548163185-13986-2-git-send-email-tariqt@mellanox.com> (raw)
In-Reply-To: <1548163185-13986-1-git-send-email-tariqt@mellanox.com>
From: Aya Levin <ayal@mellanox.com>
Driver reads the query HCA capabilities without the corresponding masks.
Without the correct masks, the base addresses of the queues are
unaligned. In addition some reserved bits were wrongly read. Using the
correct masks, ensures alignment of the base addresses and allows future
firmware versions safe use of the reserved bits.
Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet")
Fixes: 0ff1fb654bec ("{NET, IB}/mlx4: Add device managed flow steering firmware API")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/fw.c | 75 ++++++++++++++++++++-------------
1 file changed, 46 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 7df728f1e5b5..6e501af0e532 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -2067,9 +2067,11 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
{
struct mlx4_cmd_mailbox *mailbox;
__be32 *outbox;
+ u64 qword_field;
u32 dword_field;
- int err;
+ u16 word_field;
u8 byte_field;
+ int err;
static const u8 a0_dmfs_query_hw_steering[] = {
[0] = MLX4_STEERING_DMFS_A0_DEFAULT,
[1] = MLX4_STEERING_DMFS_A0_DYNAMIC,
@@ -2097,19 +2099,32 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
/* QPC/EEC/CQC/EQC/RDMARC attributes */
- MLX4_GET(param->qpc_base, outbox, INIT_HCA_QPC_BASE_OFFSET);
- MLX4_GET(param->log_num_qps, outbox, INIT_HCA_LOG_QP_OFFSET);
- MLX4_GET(param->srqc_base, outbox, INIT_HCA_SRQC_BASE_OFFSET);
- MLX4_GET(param->log_num_srqs, outbox, INIT_HCA_LOG_SRQ_OFFSET);
- MLX4_GET(param->cqc_base, outbox, INIT_HCA_CQC_BASE_OFFSET);
- MLX4_GET(param->log_num_cqs, outbox, INIT_HCA_LOG_CQ_OFFSET);
- MLX4_GET(param->altc_base, outbox, INIT_HCA_ALTC_BASE_OFFSET);
- MLX4_GET(param->auxc_base, outbox, INIT_HCA_AUXC_BASE_OFFSET);
- MLX4_GET(param->eqc_base, outbox, INIT_HCA_EQC_BASE_OFFSET);
- MLX4_GET(param->log_num_eqs, outbox, INIT_HCA_LOG_EQ_OFFSET);
- MLX4_GET(param->num_sys_eqs, outbox, INIT_HCA_NUM_SYS_EQS_OFFSET);
- MLX4_GET(param->rdmarc_base, outbox, INIT_HCA_RDMARC_BASE_OFFSET);
- MLX4_GET(param->log_rd_per_qp, outbox, INIT_HCA_LOG_RD_OFFSET);
+ MLX4_GET(qword_field, outbox, INIT_HCA_QPC_BASE_OFFSET);
+ param->qpc_base = qword_field & ~((u64)0x1f);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_QP_OFFSET);
+ param->log_num_qps = byte_field & 0x1f;
+ MLX4_GET(qword_field, outbox, INIT_HCA_SRQC_BASE_OFFSET);
+ param->srqc_base = qword_field & ~((u64)0x1f);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_SRQ_OFFSET);
+ param->log_num_srqs = byte_field & 0x1f;
+ MLX4_GET(qword_field, outbox, INIT_HCA_CQC_BASE_OFFSET);
+ param->cqc_base = qword_field & ~((u64)0x1f);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_CQ_OFFSET);
+ param->log_num_cqs = byte_field & 0x1f;
+ MLX4_GET(qword_field, outbox, INIT_HCA_ALTC_BASE_OFFSET);
+ param->altc_base = qword_field;
+ MLX4_GET(qword_field, outbox, INIT_HCA_AUXC_BASE_OFFSET);
+ param->auxc_base = qword_field;
+ MLX4_GET(qword_field, outbox, INIT_HCA_EQC_BASE_OFFSET);
+ param->eqc_base = qword_field & ~((u64)0x1f);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_EQ_OFFSET);
+ param->log_num_eqs = byte_field & 0x1f;
+ MLX4_GET(word_field, outbox, INIT_HCA_NUM_SYS_EQS_OFFSET);
+ param->num_sys_eqs = word_field & 0xfff;
+ MLX4_GET(qword_field, outbox, INIT_HCA_RDMARC_BASE_OFFSET);
+ param->rdmarc_base = qword_field & ~((u64)0x1f);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_RD_OFFSET);
+ param->log_rd_per_qp = byte_field & 0x7;
MLX4_GET(dword_field, outbox, INIT_HCA_FLAGS_OFFSET);
if (dword_field & (1 << INIT_HCA_DEVICE_MANAGED_FLOW_STEERING_EN)) {
@@ -2128,22 +2143,21 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
/* steering attributes */
if (param->steering_mode == MLX4_STEERING_MODE_DEVICE_MANAGED) {
MLX4_GET(param->mc_base, outbox, INIT_HCA_FS_BASE_OFFSET);
- MLX4_GET(param->log_mc_entry_sz, outbox,
- INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET);
- MLX4_GET(param->log_mc_table_sz, outbox,
- INIT_HCA_FS_LOG_TABLE_SZ_OFFSET);
- MLX4_GET(byte_field, outbox,
- INIT_HCA_FS_A0_OFFSET);
+ MLX4_GET(byte_field, outbox, INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET);
+ param->log_mc_entry_sz = byte_field & 0x1f;
+ MLX4_GET(byte_field, outbox, INIT_HCA_FS_LOG_TABLE_SZ_OFFSET);
+ param->log_mc_table_sz = byte_field & 0x1f;
+ MLX4_GET(byte_field, outbox, INIT_HCA_FS_A0_OFFSET);
param->dmfs_high_steer_mode =
a0_dmfs_query_hw_steering[(byte_field >> 6) & 3];
} else {
MLX4_GET(param->mc_base, outbox, INIT_HCA_MC_BASE_OFFSET);
- MLX4_GET(param->log_mc_entry_sz, outbox,
- INIT_HCA_LOG_MC_ENTRY_SZ_OFFSET);
- MLX4_GET(param->log_mc_hash_sz, outbox,
- INIT_HCA_LOG_MC_HASH_SZ_OFFSET);
- MLX4_GET(param->log_mc_table_sz, outbox,
- INIT_HCA_LOG_MC_TABLE_SZ_OFFSET);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_MC_ENTRY_SZ_OFFSET);
+ param->log_mc_entry_sz = byte_field & 0x1f;
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_MC_HASH_SZ_OFFSET);
+ param->log_mc_hash_sz = byte_field & 0x1f;
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_MC_TABLE_SZ_OFFSET);
+ param->log_mc_table_sz = byte_field & 0x1f;
}
/* CX3 is capable of extending CQEs/EQEs from 32 to 64 bytes */
@@ -2167,15 +2181,18 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
/* TPT attributes */
MLX4_GET(param->dmpt_base, outbox, INIT_HCA_DMPT_BASE_OFFSET);
- MLX4_GET(param->mw_enabled, outbox, INIT_HCA_TPT_MW_OFFSET);
- MLX4_GET(param->log_mpt_sz, outbox, INIT_HCA_LOG_MPT_SZ_OFFSET);
+ MLX4_GET(byte_field, outbox, INIT_HCA_TPT_MW_OFFSET);
+ param->mw_enabled = byte_field >> 7;
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_MPT_SZ_OFFSET);
+ param->log_mpt_sz = byte_field & 0x3f;
MLX4_GET(param->mtt_base, outbox, INIT_HCA_MTT_BASE_OFFSET);
MLX4_GET(param->cmpt_base, outbox, INIT_HCA_CMPT_BASE_OFFSET);
/* UAR attributes */
MLX4_GET(param->uar_page_sz, outbox, INIT_HCA_UAR_PAGE_SZ_OFFSET);
- MLX4_GET(param->log_uar_sz, outbox, INIT_HCA_LOG_UAR_SZ_OFFSET);
+ MLX4_GET(byte_field, outbox, INIT_HCA_LOG_UAR_SZ_OFFSET);
+ param->log_uar_sz = byte_field & 0xf;
/* phv_check enable */
MLX4_GET(byte_field, outbox, INIT_HCA_CACHELINE_SZ_OFFSET);
--
1.8.3.1
next prev parent reply other threads:[~2019-01-22 13:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 13:19 [PATCH net 0/2] mlx4_core fixes for 5.0-rc Tariq Toukan
2019-01-22 13:19 ` Tariq Toukan [this message]
2019-01-22 13:19 ` [PATCH net 2/2] net/mlx4_core: Fix error handling when initializing CQ bufs in the driver Tariq Toukan
2019-01-25 5:51 ` [PATCH net 0/2] mlx4_core fixes for 5.0-rc David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548163185-13986-2-git-send-email-tariqt@mellanox.com \
--to=tariqt@mellanox.com \
--cc=ayal@mellanox.com \
--cc=davem@davemloft.net \
--cc=eranbe@mellanox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox