[PATCH v1 net-next 1/4] net: dsa: microchip: prepare PHY for proper advertisement

[<Tristram.Ha@microchip.com>]

From: Tristram Ha <Tristram.Ha@microchip.com>

Prepare PHY for proper advertisement and get link status for the port.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
---
 drivers/net/dsa/microchip/ksz9477.c    | 17 ++++++++++++++++-
 drivers/net/dsa/microchip/ksz_common.c | 19 ++++++++++++++++++-
 drivers/net/dsa/microchip/ksz_common.h |  4 +++-
 drivers/net/dsa/microchip/ksz_priv.h   |  4 +++-
 4 files changed, 40 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 89ed059..0fdb22d 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -2,7 +2,7 @@
 /*
  * Microchip KSZ9477 switch driver main logic
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #include <linux/delay.h>
@@ -965,6 +965,19 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
+static void ksz9477_phy_setup(struct ksz_device *dev, int port,
+			      struct phy_device *phy)
+{
+	/* ETHTOOL_LINK_MODE_Pause_BIT and ETHTOOL_LINK_MODE_Asym_Pause_BIT
+	 * can be removed to disable flow control when rate limiting is used.
+	 */
+	if (port < dev->phy_port_cnt) {
+		/* The MAC actually cannot run in 1000 half-duplex mode. */
+		phy_remove_link_mode(phy,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	}
+}
+
 static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	u8 data8;
@@ -1151,6 +1164,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
 	.setup			= ksz9477_setup,
 	.phy_read		= ksz9477_phy_read16,
 	.phy_write		= ksz9477_phy_write16,
+	.adjust_link		= ksz_adjust_link,
 	.port_enable		= ksz_enable_port,
 	.port_disable		= ksz_disable_port,
 	.get_strings		= ksz9477_get_strings,
@@ -1298,6 +1312,7 @@ static void ksz9477_switch_exit(struct ksz_device *dev)
 	.get_port_addr = ksz9477_get_port_addr,
 	.cfg_port_member = ksz9477_cfg_port_member,
 	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+	.phy_setup = ksz9477_phy_setup,
 	.port_setup = ksz9477_port_setup,
 	.shutdown = ksz9477_reset_switch,
 	.detect = ksz9477_switch_detect,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8a5111f..a57bda7 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2,7 +2,7 @@
 /*
  * Microchip switch driver main logic
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #include <linux/delay.h>
@@ -61,6 +61,22 @@ int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 }
 EXPORT_SYMBOL_GPL(ksz_phy_write16);
 
+void ksz_adjust_link(struct dsa_switch *ds, int port,
+		     struct phy_device *phydev)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+
+	if (phydev->link) {
+		dev->live_ports |= (1 << port) & dev->on_ports;
+	} else if (p->phydev.link) {
+		p->link_just_down = 1;
+		dev->live_ports &= ~(1 << port);
+	}
+	p->phydev = *phydev;
+}
+EXPORT_SYMBOL_GPL(ksz_adjust_link);
+
 int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
 {
 	struct ksz_device *dev = ds->priv;
@@ -238,6 +254,7 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	/* setup slave port */
 	dev->dev_ops->port_setup(dev, port, false);
+	dev->dev_ops->phy_setup(dev, port, phy);
 
 	/* port_stp_state_set() will be called after to enable the port so
 	 * there is no need to do anything.
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 2dd832d..6d49319 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0
  * Microchip switch driver common header
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #ifndef __KSZ_COMMON_H
@@ -13,6 +13,8 @@
 
 int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
 int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+void ksz_adjust_link(struct dsa_switch *ds, int port,
+		     struct phy_device *phydev);
 int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
 int ksz_port_bridge_join(struct dsa_switch *ds, int port,
 			 struct net_device *br);
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 60b4901..0fdc58b 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -2,7 +2,7 @@
  *
  * Microchip KSZ series switch common definitions
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
  */
 
 #ifndef __KSZ_PRIV_H
@@ -137,6 +137,8 @@ struct ksz_dev_ops {
 	u32 (*get_port_addr)(int port, int offset);
 	void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
 	void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+	void (*phy_setup)(struct ksz_device *dev, int port,
+			  struct phy_device *phy);
 	void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
 	void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 	void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
-- 
1.9.1