From: Voon Weifeng <weifeng.voon@intel.com>
To: "David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Jose Abreu <joabreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
biao huang <biao.huang@mediatek.com>,
Ong Boon Leong <boon.leong.ong@intel.com>,
Kweh Hock Leong <hock.leong.kweh@intel.com>,
Voon Weifeng <weifeng.voon@intel.com>
Subject: [PATCH v2 net-next] net: stmmac: enable clause 45 mdio support
Date: Sat, 6 Jul 2019 01:33:27 +0800 [thread overview]
Message-ID: <1562348007-12263-1-git-send-email-weifeng.voon@intel.com> (raw)
From: Kweh Hock Leong <hock.leong.kweh@intel.com>
DWMAC4 is capable to support clause 45 mdio communication.
This patch enable the feature on stmmac_mdio_write() and
stmmac_mdio_read() by following phy_write_mmd() and
phy_read_mmd() mdiobus read write implementation format.
Reviewed-by: Li, Yifan <yifan2.li@intel.com>
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 18cadf0b0d66..4304c1abc5d1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -24,11 +24,14 @@
#define MII_BUSY 0x00000001
#define MII_WRITE 0x00000002
+#define MII_DATA_MASK GENMASK(15, 0)
/* GMAC4 defines */
#define MII_GMAC4_GOC_SHIFT 2
+#define MII_GMAC4_REG_ADDR_SHIFT 16
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
+#define MII_GMAC4_C45E BIT(1)
/* XGMAC defines */
#define MII_XGMAC_SADDR BIT(18)
@@ -155,22 +158,34 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
- int data;
u32 value = MII_BUSY;
+ int data = 0;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_READ;
+ if (phyreg & MII_ADDR_C45) {
+ value |= MII_GMAC4_C45E;
+ value &= ~priv->hw->mii.reg_mask;
+ value |= ((phyreg >> MII_DEVADDR_C45_SHIFT) <<
+ priv->hw->mii.reg_shift) &
+ priv->hw->mii.reg_mask;
+
+ data |= (phyreg & MII_REGADDR_C45_MASK) <<
+ MII_GMAC4_REG_ADDR_SHIFT;
+ }
+ }
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
100, 10000))
return -EBUSY;
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -178,7 +193,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
return -EBUSY;
/* Read the data from the MII data register */
- data = (int)readl(priv->ioaddr + mii_data);
+ data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
return data;
}
@@ -198,8 +213,9 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
u32 value = MII_BUSY;
+ int data = phydata;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
@@ -207,10 +223,21 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_WRITE;
- else
+ if (phyreg & MII_ADDR_C45) {
+ value |= MII_GMAC4_C45E;
+ value &= ~priv->hw->mii.reg_mask;
+ value |= ((phyreg >> MII_DEVADDR_C45_SHIFT) <<
+ priv->hw->mii.reg_shift) &
+ priv->hw->mii.reg_mask;
+
+ data |= (phyreg & MII_REGADDR_C45_MASK) <<
+ MII_GMAC4_REG_ADDR_SHIFT;
+ }
+ } else {
value |= MII_WRITE;
+ }
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -218,7 +245,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
return -EBUSY;
/* Set the MII address register to write */
- writel(phydata, priv->ioaddr + mii_data);
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d0af7d37fdf9..1739c6dc470e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -195,6 +195,8 @@ static inline const char *phy_modes(phy_interface_t interface)
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
#define MII_ADDR_C45 (1<<30)
+#define MII_DEVADDR_C45_SHIFT 16
+#define MII_REGADDR_C45_MASK GENMASK(15, 0)
struct device;
struct phylink;
--
Changelog v2
*Merge c45_setup() into stmmac_mdio_read() and stmmac_mdio_write()
to increase readability
1.9.1
next reply other threads:[~2019-07-05 9:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-05 17:33 Voon Weifeng [this message]
2019-07-08 17:24 ` [PATCH v2 net-next] net: stmmac: enable clause 45 mdio support Andrew Lunn
2019-07-08 23:09 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562348007-12263-1-git-send-email-weifeng.voon@intel.com \
--to=weifeng.voon@intel.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=biao.huang@mediatek.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hock.leong.kweh@intel.com \
--cc=joabreu@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).