From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>,
Sean Tranchetti <stranche@codeaurora.org>
Subject: [PATCH net] net: qualcomm: rmnet: Fix incorrect UL checksum offload logic
Date: Thu, 25 Jul 2019 12:07:12 -0600 [thread overview]
Message-ID: <1564078032-8754-1-git-send-email-subashab@codeaurora.org> (raw)
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
so that the hardware can flip the checksum to 0xFFFF if the computed
checksum is 0 per RFC768.
However, this bit had to be set for IPv6 UDP non fragmented packets
as well per hardware requirements. Otherwise, IPv6 UDP packets
with computed checksum as 0 were transmitted by hardware and were
dropped in the network.
In addition to setting this bit for IPv6 UDP, the field is also
appropriately renamed to udp_ind as part of this change.
Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 13 +++++++++----
include/linux/if_rmnet.h | 4 ++--
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
index 6018992..21d3816 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
@@ -206,9 +206,9 @@ static void rmnet_map_complement_ipv4_txporthdr_csum_field(void *iphdr)
ul_header->csum_insert_offset = skb->csum_offset;
ul_header->csum_enabled = 1;
if (ip4h->protocol == IPPROTO_UDP)
- ul_header->udp_ip4_ind = 1;
+ ul_header->udp_ind = 1;
else
- ul_header->udp_ip4_ind = 0;
+ ul_header->udp_ind = 0;
/* Changing remaining fields to network order */
hdr++;
@@ -239,6 +239,7 @@ static void rmnet_map_complement_ipv6_txporthdr_csum_field(void *ip6hdr)
struct rmnet_map_ul_csum_header *ul_header,
struct sk_buff *skb)
{
+ struct ipv6hdr *ip6h = (struct ipv6hdr *)ip6hdr;
__be16 *hdr = (__be16 *)ul_header, offset;
offset = htons((__force u16)(skb_transport_header(skb) -
@@ -246,7 +247,11 @@ static void rmnet_map_complement_ipv6_txporthdr_csum_field(void *ip6hdr)
ul_header->csum_start_offset = offset;
ul_header->csum_insert_offset = skb->csum_offset;
ul_header->csum_enabled = 1;
- ul_header->udp_ip4_ind = 0;
+
+ if (ip6h->nexthdr == IPPROTO_UDP)
+ ul_header->udp_ind = 1;
+ else
+ ul_header->udp_ind = 0;
/* Changing remaining fields to network order */
hdr++;
@@ -419,7 +424,7 @@ void rmnet_map_checksum_uplink_packet(struct sk_buff *skb,
ul_header->csum_start_offset = 0;
ul_header->csum_insert_offset = 0;
ul_header->csum_enabled = 0;
- ul_header->udp_ip4_ind = 0;
+ ul_header->udp_ind = 0;
priv->stats.csum_sw++;
}
diff --git a/include/linux/if_rmnet.h b/include/linux/if_rmnet.h
index b4f5403..9661416 100644
--- a/include/linux/if_rmnet.h
+++ b/include/linux/if_rmnet.h
@@ -41,11 +41,11 @@ struct rmnet_map_ul_csum_header {
__be16 csum_start_offset;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u16 csum_insert_offset:14;
- u16 udp_ip4_ind:1;
+ u16 udp_ind:1;
u16 csum_enabled:1;
#elif defined (__BIG_ENDIAN_BITFIELD)
u16 csum_enabled:1;
- u16 udp_ip4_ind:1;
+ u16 udp_ind:1;
u16 csum_insert_offset:14;
#else
#error "Please fix <asm/byteorder.h>"
--
1.9.1
next reply other threads:[~2019-07-25 18:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 18:07 Subash Abhinov Kasiviswanathan [this message]
2019-07-26 21:20 ` [PATCH net] net: qualcomm: rmnet: Fix incorrect UL checksum offload logic David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1564078032-8754-1-git-send-email-subashab@codeaurora.org \
--to=subashab@codeaurora.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=stranche@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).