From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, Geetha sowjanya <gakula@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH 04/15] octeontx2-af: Ingress and egress pause frame configuration
Date: Sun, 17 Nov 2019 21:44:15 +0530 [thread overview]
Message-ID: <1574007266-17123-5-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1574007266-17123-1-git-send-email-sunil.kovvuri@gmail.com>
From: Geetha sowjanya <gakula@marvell.com>
Pause frames can be generated when NIX/NPA asserts backpressure
due to insufficient resources. This patch enables generation
of pause frames by CGX. Also enabled processing of received
pause frames and asserting backpressure on NIX transmit path.
Also added mailbox config messages for PF/VF to enable/disable
flow control any time.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 106 +++++++++++++++++++++
drivers/net/ethernet/marvell/octeontx2/af/cgx.h | 14 +++
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 11 +++
.../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 24 +++++
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 5 +
5 files changed, 160 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index aa2ce5e..af30dad 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -381,6 +381,110 @@ int cgx_lmac_tx_enable(void *cgxd, int lmac_id, bool enable)
}
EXPORT_SYMBOL(cgx_lmac_tx_enable);
+int cgx_lmac_get_pause_frm(void *cgxd, int lmac_id,
+ u8 *tx_pause, u8 *rx_pause)
+{
+ struct cgx *cgx = cgxd;
+ u64 cfg;
+
+ if (!cgx || lmac_id >= cgx->lmac_count)
+ return -ENODEV;
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+ *rx_pause = !!(cfg & CGX_SMUX_RX_FRM_CTL_CTL_BCK);
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+ *tx_pause = !!(cfg & CGX_SMUX_TX_CTL_L2P_BP_CONV);
+ return 0;
+}
+EXPORT_SYMBOL(cgx_lmac_get_pause_frm);
+
+int cgx_lmac_set_pause_frm(void *cgxd, int lmac_id,
+ u8 tx_pause, u8 rx_pause)
+{
+ struct cgx *cgx = cgxd;
+ u64 cfg;
+
+ if (!cgx || lmac_id >= cgx->lmac_count)
+ return -ENODEV;
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+ cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+ cfg |= rx_pause ? CGX_SMUX_RX_FRM_CTL_CTL_BCK : 0x0;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+ cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV;
+ cfg |= tx_pause ? CGX_SMUX_TX_CTL_L2P_BP_CONV : 0x0;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+
+ cfg = cgx_read(cgx, 0, CGXX_CMR_RX_OVR_BP);
+ if (tx_pause) {
+ cfg &= ~CGX_CMR_RX_OVR_BP_EN(lmac_id);
+ } else {
+ cfg |= CGX_CMR_RX_OVR_BP_EN(lmac_id);
+ cfg &= ~CGX_CMR_RX_OVR_BP_BP(lmac_id);
+ }
+ cgx_write(cgx, 0, CGXX_CMR_RX_OVR_BP, cfg);
+ return 0;
+}
+EXPORT_SYMBOL(cgx_lmac_set_pause_frm);
+
+static void cgx_lmac_pause_frm_config(struct cgx *cgx, int lmac_id, bool enable)
+{
+ u64 cfg;
+
+ if (!cgx || lmac_id >= cgx->lmac_count)
+ return;
+ if (enable) {
+ /* Enable receive pause frames */
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+ cfg |= CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL);
+ cfg |= CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK;
+ cgx_write(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL, cfg);
+
+ /* Enable pause frames transmission */
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+ cfg |= CGX_SMUX_TX_CTL_L2P_BP_CONV;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+
+ /* Set pause time and interval*/
+ cgx_write(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_TIME,
+ DEFAULT_PAUSE_TIME);
+ /* Set pause interval as the hardware default is too short */
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_INTERVAL);
+ cfg &= ~0xFFFFULL;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_INTERVAL,
+ cfg | (DEFAULT_PAUSE_TIME - 0x1000));
+
+ cgx_write(cgx, lmac_id, CGXX_GMP_GMI_TX_PAUSE_PKT_TIME,
+ DEFAULT_PAUSE_TIME);
+
+ cfg = cgx_read(cgx, lmac_id,
+ CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL);
+ cfg &= ~0xFFFFULL;
+ cgx_write(cgx, lmac_id, CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL,
+ cfg | (DEFAULT_PAUSE_TIME - 0x1000));
+ } else {
+ /* ALL pause frames received are completely ignored */
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+ cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+ cfg = cgx_read(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL);
+ cfg &= ~CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK;
+ cgx_write(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL, cfg);
+
+ /* Disable pause frames transmission */
+ cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+ cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV;
+ cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+ }
+}
+
/* CGX Firmware interface low level support */
static int cgx_fwi_cmd_send(u64 req, u64 *resp, struct lmac *lmac)
{
@@ -823,6 +927,7 @@ static int cgx_lmac_init(struct cgx *cgx)
/* Add reference */
cgx->lmac_idmap[i] = lmac;
+ cgx_lmac_pause_frm_config(cgx, i, true);
}
return cgx_lmac_verify_fwi_version(cgx);
@@ -841,6 +946,7 @@ static int cgx_lmac_exit(struct cgx *cgx)
/* Free all lmac related resources */
for (i = 0; i < cgx->lmac_count; i++) {
+ cgx_lmac_pause_frm_config(cgx, i, false);
lmac = cgx->lmac_idmap[i];
if (!lmac)
continue;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
index cd3a903..f0747e4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
@@ -60,10 +60,20 @@
#define CGX_SMUX_RX_FRM_CTL_CTL_BCK BIT_ULL(3)
#define CGXX_GMP_GMI_RXX_FRM_CTL 0x38028
#define CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK BIT_ULL(3)
+#define CGXX_SMUX_TX_CTL 0x20178
+#define CGXX_SMUX_TX_PAUSE_PKT_TIME 0x20110
+#define CGXX_SMUX_TX_PAUSE_PKT_INTERVAL 0x20120
+#define CGXX_GMP_GMI_TX_PAUSE_PKT_TIME 0x38230
+#define CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL 0x38248
+#define CGX_SMUX_TX_CTL_L2P_BP_CONV BIT_ULL(7)
+#define CGXX_CMR_RX_OVR_BP 0x130
+#define CGX_CMR_RX_OVR_BP_EN(X) BIT_ULL(((X) + 8))
+#define CGX_CMR_RX_OVR_BP_BP(X) BIT_ULL(((X) + 4))
#define CGX_COMMAND_REG CGXX_SCRATCH1_REG
#define CGX_EVENT_REG CGXX_SCRATCH0_REG
#define CGX_CMD_TIMEOUT 2200 /* msecs */
+#define DEFAULT_PAUSE_TIME 0xFFFF
#define CGX_NVEC 37
#define CGX_LMAC_FWI 0
@@ -125,5 +135,9 @@ int cgx_get_link_info(void *cgxd, int lmac_id,
struct cgx_link_user_info *linfo);
int cgx_lmac_linkup_start(void *cgxd);
int cgx_get_fwdata_base(u64 *base);
+int cgx_lmac_get_pause_frm(void *cgxd, int lmac_id,
+ u8 *tx_pause, u8 *rx_pause);
+int cgx_lmac_set_pause_frm(void *cgxd, int lmac_id,
+ u8 tx_pause, u8 rx_pause);
int cgx_get_mkex_prfl_info(u64 *addr, u64 *size);
#endif /* CGX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index b6acc6e..bde3bda 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -143,6 +143,8 @@ M(CGX_STOP_LINKEVENTS, 0x208, cgx_stop_linkevents, msg_req, msg_rsp) \
M(CGX_GET_LINKINFO, 0x209, cgx_get_linkinfo, msg_req, cgx_link_info_msg) \
M(CGX_INTLBK_ENABLE, 0x20A, cgx_intlbk_enable, msg_req, msg_rsp) \
M(CGX_INTLBK_DISABLE, 0x20B, cgx_intlbk_disable, msg_req, msg_rsp) \
+M(CGX_CFG_PAUSE_FRM, 0x20E, cgx_cfg_pause_frm, cgx_pause_frm_cfg, \
+ cgx_pause_frm_cfg) \
/* NPA mbox IDs (range 0x400 - 0x5FF) */ \
M(NPA_LF_ALLOC, 0x400, npa_lf_alloc, \
npa_lf_alloc_req, npa_lf_alloc_rsp) \
@@ -346,6 +348,15 @@ struct cgx_link_info_msg {
struct cgx_link_user_info link_info;
};
+struct cgx_pause_frm_cfg {
+ struct mbox_msghdr hdr;
+ u8 set;
+ /* set = 1 if the request is to config pause frames */
+ /* set = 0 if the request is to fetch pause frames config */
+ u8 rx_pause;
+ u8 tx_pause;
+};
+
/* NPA mbox message formats */
/* NPA mailbox error codes
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index 5790a76..e9f8953 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -590,6 +590,30 @@ int rvu_mbox_handler_cgx_intlbk_disable(struct rvu *rvu, struct msg_req *req,
return 0;
}
+int rvu_mbox_handler_cgx_cfg_pause_frm(struct rvu *rvu,
+ struct cgx_pause_frm_cfg *req,
+ struct cgx_pause_frm_cfg *rsp)
+{
+ int pf = rvu_get_pf(req->hdr.pcifunc);
+ u8 cgx_id, lmac_id;
+
+ /* This msg is expected only from PF/VFs that are mapped to CGX LMACs,
+ * if received from other PF/VF simply ACK, nothing to do.
+ */
+ if (!is_pf_cgxmapped(rvu, pf))
+ return -ENODEV;
+
+ rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+
+ if (req->set)
+ cgx_lmac_set_pause_frm(rvu_cgx_pdata(cgx_id, rvu), lmac_id,
+ req->tx_pause, req->rx_pause);
+ else
+ cgx_lmac_get_pause_frm(rvu_cgx_pdata(cgx_id, rvu), lmac_id,
+ &rsp->tx_pause, &rsp->rx_pause);
+ return 0;
+}
+
/* Finds cumulative status of NIX rx/tx counters from LF of a PF and those
* from its VFs as well. ie. NIX rx/tx counters at the CGX port level
*/
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 83bd42e..10b49e5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -193,6 +193,11 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf)
pfvf->tx_chan_cnt = 1;
cgx_set_pkind(rvu_cgx_pdata(cgx_id, rvu), lmac_id, pkind);
rvu_npc_set_pkind(rvu, pkind, pfvf);
+
+ /* By default we enable pause frames */
+ if ((pcifunc & RVU_PFVF_FUNC_MASK) == 0)
+ cgx_lmac_set_pause_frm(rvu_cgx_pdata(cgx_id, rvu),
+ lmac_id, true, true);
break;
case NIX_INTF_TYPE_LBK:
vf = (pcifunc & RVU_PFVF_FUNC_MASK) - 1;
--
2.7.4
next prev parent reply other threads:[~2019-11-17 16:15 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-17 16:14 [PATCH 00/15] octeontx2-af: SSO, TIM HW blocks and other config support sunil.kovvuri
2019-11-17 16:14 ` [PATCH 01/15] octeontx2-af: Interface backpressure configuration support sunil.kovvuri
2019-11-18 21:12 ` Jakub Kicinski
2019-11-19 7:30 ` Sunil Kovvuri
2019-11-17 16:14 ` [PATCH 02/15] octeontx2-af: Add support for importing firmware data sunil.kovvuri
2019-11-18 21:28 ` Jakub Kicinski
2019-11-19 7:31 ` Sunil Kovvuri
2019-11-19 21:38 ` Jakub Kicinski
2019-11-20 17:27 ` Sunil Kovvuri
2019-11-19 0:01 ` kbuild test robot
2019-11-22 19:37 ` kbuild test robot
2019-11-17 16:14 ` [PATCH 03/15] octeontx2-af: Cleanup CGX config permission checks sunil.kovvuri
2019-11-17 18:33 ` David Miller
2019-11-19 7:33 ` Sunil Kovvuri
2019-11-17 16:14 ` sunil.kovvuri [this message]
2019-11-18 21:33 ` [PATCH 04/15] octeontx2-af: Ingress and egress pause frame configuration Jakub Kicinski
2019-11-17 16:14 ` [PATCH 05/15] octeontx2-af: Set discovery ID for RVUM block sunil.kovvuri
2019-11-17 16:14 ` [PATCH 06/15] octeontx2-af: add debug msgs for NPA block errors sunil.kovvuri
2019-11-17 16:14 ` [PATCH 07/15] octeontx2-af: add debug msgs for NIX " sunil.kovvuri
2019-11-17 16:14 ` [PATCH 08/15] octeontx2-af: Add SSO unit support to the AF driver sunil.kovvuri
2019-11-17 16:14 ` [PATCH 09/15] octeontx2-af: Config support for per HWGRP thresholds sunil.kovvuri
2019-11-17 16:14 ` [PATCH 10/15] octeontx2-af: add debug msgs for SSO block errors sunil.kovvuri
2019-11-17 16:14 ` [PATCH 11/15] octeontx2-af: add debugfs support for sso sunil.kovvuri
2019-11-17 16:14 ` [PATCH 12/15] octeontx2-af: Add TIM unit support sunil.kovvuri
2019-11-17 18:36 ` David Miller
2019-11-19 7:32 ` Sunil Kovvuri
2019-11-17 16:14 ` [PATCH 13/15] octeontx2-af: verify ingress channel in MCAM entry sunil.kovvuri
2019-11-17 16:14 ` [PATCH 14/15] octeontx2-af: NPC Tx parsed data key extraction profile sunil.kovvuri
2019-11-17 16:14 ` [PATCH 15/15] octeontx2-af: Support to get CGX link info like current speed, fec etc sunil.kovvuri
2019-11-18 21:49 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574007266-17123-5-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=davem@davemloft.net \
--cc=gakula@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).