From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, Subbaraya Sundeep <sbhatta@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v2 13/15] octeontx2-af: verify ingress channel in MCAM entry
Date: Tue, 19 Nov 2019 16:47:37 +0530 [thread overview]
Message-ID: <1574162259-28181-14-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1574162259-28181-1-git-send-email-sunil.kovvuri@gmail.com>
From: Subbaraya Sundeep <sbhatta@marvell.com>
A RVU PF and it's VFs share a CGX port and can only take pkts
received at that port. While installing MCAM entries for forwarding
packets it should be made sure that this is not violated. Hence
before installing MCAM entry sent by PF/VF the ingress channel
in the match key needs to be verified.
This patch does this channel verification.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 4 +-
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 +
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 47 ++++++++++++++++++++++
3 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index b6291ea..fd0cb77 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2479,7 +2479,7 @@ static void rvu_enable_afvf_intr(struct rvu *rvu)
#define PCI_DEVID_OCTEONTX2_LBK 0xA061
-static int lbk_get_num_chans(void)
+int rvu_get_num_lbk_chans(void)
{
struct pci_dev *pdev;
void __iomem *base;
@@ -2514,7 +2514,7 @@ static int rvu_enable_sriov(struct rvu *rvu)
return 0;
}
- chans = lbk_get_num_chans();
+ chans = rvu_get_num_lbk_chans();
if (chans < 0)
return chans;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 00468c88..f474a26 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -427,6 +427,7 @@ int rvu_get_lf(struct rvu *rvu, struct rvu_block *block, u16 pcifunc, u16 slot);
int rvu_lf_reset(struct rvu *rvu, struct rvu_block *block, int lf);
int rvu_get_blkaddr(struct rvu *rvu, int blktype, u16 pcifunc);
int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero);
+int rvu_get_num_lbk_chans(void);
/* RVU HW reg validation */
enum regmap_block {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 40e431d..cf61796 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -28,11 +28,40 @@
#define NPC_PARSE_RESULT_DMAC_OFFSET 8
+#define NPC_KEX_CHAN_MASK 0xFFFULL
+
static void npc_mcam_free_all_entries(struct rvu *rvu, struct npc_mcam *mcam,
int blkaddr, u16 pcifunc);
static void npc_mcam_free_all_counters(struct rvu *rvu, struct npc_mcam *mcam,
u16 pcifunc);
+static int npc_mcam_verify_channel(struct rvu *rvu, u16 pcifunc,
+ u8 intf, u16 channel)
+{
+ int pf = rvu_get_pf(pcifunc);
+ u8 cgx_id, lmac_id;
+ int base = 0, end;
+
+ if (intf == NIX_INTF_TX)
+ return 0;
+
+ if (is_afvf(pcifunc)) {
+ end = rvu_get_num_lbk_chans();
+ if (end < 0)
+ return -EINVAL;
+ } else {
+ rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+ base = NIX_CHAN_CGX_LMAC_CHX(cgx_id, lmac_id, 0x0);
+ /* CGX mapped functions has maximum of 16 channels */
+ end = NIX_CHAN_CGX_LMAC_CHX(cgx_id, lmac_id, 0xF);
+ }
+
+ if (channel < base || channel > end)
+ return -EINVAL;
+
+ return 0;
+}
+
void rvu_npc_set_pkind(struct rvu *rvu, int pkind, struct rvu_pfvf *pfvf)
{
int blkaddr;
@@ -1808,12 +1837,17 @@ int rvu_mbox_handler_npc_mcam_write_entry(struct rvu *rvu,
{
struct npc_mcam *mcam = &rvu->hw->mcam;
u16 pcifunc = req->hdr.pcifunc;
+ u16 channel, chan_mask;
int blkaddr, rc;
blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
if (blkaddr < 0)
return NPC_MCAM_INVALID_REQ;
+ chan_mask = req->entry_data.kw_mask[0] & NPC_KEX_CHAN_MASK;
+ channel = req->entry_data.kw[0] & NPC_KEX_CHAN_MASK;
+ channel &= chan_mask;
+
mutex_lock(&mcam->lock);
rc = npc_mcam_verify_entry(mcam, pcifunc, req->entry);
if (rc)
@@ -1830,6 +1864,11 @@ int rvu_mbox_handler_npc_mcam_write_entry(struct rvu *rvu,
goto exit;
}
+ if (npc_mcam_verify_channel(rvu, pcifunc, req->intf, channel)) {
+ rc = NPC_MCAM_INVALID_REQ;
+ goto exit;
+ }
+
npc_config_mcam_entry(rvu, mcam, blkaddr, req->entry, req->intf,
&req->entry_data, req->enable_entry);
@@ -2165,6 +2204,7 @@ int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
struct npc_mcam *mcam = &rvu->hw->mcam;
u16 entry = NPC_MCAM_ENTRY_INVALID;
u16 cntr = NPC_MCAM_ENTRY_INVALID;
+ u16 channel, chan_mask;
int blkaddr, rc;
blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
@@ -2174,6 +2214,13 @@ int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
if (req->intf != NIX_INTF_RX && req->intf != NIX_INTF_TX)
return NPC_MCAM_INVALID_REQ;
+ chan_mask = req->entry_data.kw_mask[0] & NPC_KEX_CHAN_MASK;
+ channel = req->entry_data.kw[0] & NPC_KEX_CHAN_MASK;
+ channel &= chan_mask;
+
+ if (npc_mcam_verify_channel(rvu, req->hdr.pcifunc, req->intf, channel))
+ return NPC_MCAM_INVALID_REQ;
+
/* Try to allocate a MCAM entry */
entry_req.hdr.pcifunc = req->hdr.pcifunc;
entry_req.contig = true;
--
2.7.4
next prev parent reply other threads:[~2019-11-19 11:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-19 11:17 [PATCH v2 00/15] octeontx2-af: SSO, TIM HW blocks and other config support sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 01/15] octeontx2-af: Interface backpressure configuration support sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 02/15] octeontx2-af: Add support for importing firmware data sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 03/15] octeontx2-af: Cleanup CGX config permission checks sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 04/15] octeontx2-af: Ingress and egress pause frame configuration sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 05/15] octeontx2-af: Set discovery ID for RVUM block sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 06/15] octeontx2-af: add debug msgs for NPA block errors sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 07/15] octeontx2-af: add debug msgs for NIX " sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 08/15] octeontx2-af: Add SSO unit support to the AF driver sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 09/15] octeontx2-af: Config support for per HWGRP thresholds sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 10/15] octeontx2-af: add debug msgs for SSO block errors sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 11/15] octeontx2-af: add debugfs support for sso sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 12/15] octeontx2-af: Add TIM unit support sunil.kovvuri
2019-11-19 11:17 ` sunil.kovvuri [this message]
2019-11-19 11:17 ` [PATCH v2 14/15] octeontx2-af: NPC Tx parsed data key extraction profile sunil.kovvuri
2019-11-19 11:17 ` [PATCH v2 15/15] octeontx2-af: Support to get CGX link info like current speed, fec etc sunil.kovvuri
2019-11-19 21:46 ` [PATCH v2 00/15] octeontx2-af: SSO, TIM HW blocks and other config support Jakub Kicinski
2019-11-19 22:02 ` David Miller
2019-11-20 17:26 ` Sunil Kovvuri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574162259-28181-14-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).