From: Milind Parab <mparab@cadence.com>
To: <andrew@lunn.ch>, <antoine.tenart@bootlin.com>
Cc: <nicolas.ferre@microchip.com>, <davem@davemloft.net>,
<netdev@vger.kernel.org>, <f.fainelli@gmail.com>,
<hkallweit1@gmail.com>, <linux-kernel@vger.kernel.org>,
<dkangude@cadence.com>, <pthombar@cadence.com>,
Milind Parab <mparab@cadence.com>
Subject: [PATCH 2/3] net: macb: add support for C45 MDIO read/write
Date: Tue, 26 Nov 2019 09:09:49 +0000 [thread overview]
Message-ID: <1574759389-103118-1-git-send-email-mparab@cadence.com> (raw)
In-Reply-To: <1574759354-102696-1-git-send-email-mparab@cadence.com>
This patch modify MDIO read/write functions to support
communication with C45 PHY.
Signed-off-by: Milind Parab <mparab@cadence.com>
---
drivers/net/ethernet/cadence/macb.h | 15 ++++--
drivers/net/ethernet/cadence/macb_main.c | 61 +++++++++++++++++++-----
2 files changed, 61 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 19fe4f4867c7..dbf7070fcdba 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -630,10 +630,17 @@
#define GEM_CLK_DIV96 5
/* Constants for MAN register */
-#define MACB_MAN_SOF 1
-#define MACB_MAN_WRITE 1
-#define MACB_MAN_READ 2
-#define MACB_MAN_CODE 2
+#define MACB_MAN_C22_SOF 1
+#define MACB_MAN_C22_WRITE 1
+#define MACB_MAN_C22_READ 2
+#define MACB_MAN_C22_CODE 2
+
+#define MACB_MAN_C45_SOF 0
+#define MACB_MAN_C45_ADDR 0
+#define MACB_MAN_C45_WRITE 1
+#define MACB_MAN_C45_POST_READ_INCR 2
+#define MACB_MAN_C45_READ 3
+#define MACB_MAN_C45_CODE 2
/* Capability mask bits */
#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 5e6d27d33d43..7cdadc200c28 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -337,11 +337,30 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
if (status < 0)
goto mdio_read_exit;
- macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- | MACB_BF(RW, MACB_MAN_READ)
- | MACB_BF(PHYA, mii_id)
- | MACB_BF(REGA, regnum)
- | MACB_BF(CODE, MACB_MAN_CODE)));
+ if (regnum & MII_ADDR_C45) {
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
+ | MACB_BF(RW, MACB_MAN_C45_ADDR)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, (regnum >> 16) & 0x1F)
+ | MACB_BF(DATA, regnum & 0xFFFF)
+ | MACB_BF(CODE, MACB_MAN_C45_CODE)));
+
+ status = macb_mdio_wait_for_idle(bp);
+ if (status < 0)
+ goto mdio_read_exit;
+
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
+ | MACB_BF(RW, MACB_MAN_C45_READ)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, (regnum >> 16) & 0x1F)
+ | MACB_BF(CODE, MACB_MAN_C45_CODE)));
+ } else {
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C22_SOF)
+ | MACB_BF(RW, MACB_MAN_C22_READ)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, regnum)
+ | MACB_BF(CODE, MACB_MAN_C22_CODE)));
+ }
status = macb_mdio_wait_for_idle(bp);
if (status < 0)
@@ -370,12 +389,32 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
if (status < 0)
goto mdio_write_exit;
- macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- | MACB_BF(RW, MACB_MAN_WRITE)
- | MACB_BF(PHYA, mii_id)
- | MACB_BF(REGA, regnum)
- | MACB_BF(CODE, MACB_MAN_CODE)
- | MACB_BF(DATA, value)));
+ if (regnum & MII_ADDR_C45) {
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
+ | MACB_BF(RW, MACB_MAN_C45_ADDR)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, (regnum >> 16) & 0x1F)
+ | MACB_BF(DATA, regnum & 0xFFFF)
+ | MACB_BF(CODE, MACB_MAN_C45_CODE)));
+
+ status = macb_mdio_wait_for_idle(bp);
+ if (status < 0)
+ goto mdio_write_exit;
+
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
+ | MACB_BF(RW, MACB_MAN_C45_WRITE)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, (regnum >> 16) & 0x1F)
+ | MACB_BF(CODE, MACB_MAN_C45_CODE)
+ | MACB_BF(DATA, value)));
+ } else {
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C22_SOF)
+ | MACB_BF(RW, MACB_MAN_C22_WRITE)
+ | MACB_BF(PHYA, mii_id)
+ | MACB_BF(REGA, regnum)
+ | MACB_BF(CODE, MACB_MAN_C22_CODE)
+ | MACB_BF(DATA, value)));
+ }
status = macb_mdio_wait_for_idle(bp);
if (status < 0)
--
2.17.1
next prev parent reply other threads:[~2019-11-26 9:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-26 9:09 [PATCH 0/3] net: macb: cover letter Milind Parab
2019-11-26 9:09 ` [PATCH 1/3] net: macb: fix for fixed-link mode Milind Parab
2019-11-26 14:30 ` Andrew Lunn
2019-11-27 18:02 ` Nicolas.Ferre
2019-11-28 6:50 ` Milind Parab
2019-11-26 9:09 ` Milind Parab [this message]
2019-11-26 14:37 ` [PATCH 2/3] net: macb: add support for C45 MDIO read/write Andrew Lunn
2019-11-27 18:31 ` Nicolas.Ferre
2019-11-27 18:51 ` Andrew Lunn
2019-11-28 8:29 ` Milind Parab
2019-11-28 14:52 ` Andrew Lunn
2019-11-29 10:02 ` Milind Parab
2019-11-26 9:09 ` [PATCH 3/3] net: macb: add support for high speed interface Milind Parab
2019-11-26 18:09 ` [PATCH 0/3] net: macb: cover letter David Miller
-- strict thread matches above, loose matches on Subject: below --
2019-12-09 11:13 [PATCH 0/3] net: macb: fix for fixed link, support for c45 mdio and 10G Milind Parab
2019-12-09 11:15 ` [PATCH 2/3] net: macb: add support for C45 MDIO read/write Milind Parab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574759389-103118-1-git-send-email-mparab@cadence.com \
--to=mparab@cadence.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=dkangude@cadence.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pthombar@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).