[PATCH 3/6] net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10G

[Madalin Bucur <madalin.bucur@oss.nxp.com>]

As the only 10G PHY interface type defined at the moment the code
was developed was XGMII, although the PHY interface mode used was
not XGMII, XGMII was used everywhere in the code. This patch
renames the 10G interface mode to remove the ambiguity as more
PHY interface modes are possible.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
---
 drivers/net/ethernet/freescale/fman/fman_memac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index 41c6fa200e74..e1901874c19f 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -110,7 +110,7 @@ do {									\
 /* Interface Mode Register (IF_MODE) */
 
 #define IF_MODE_MASK		0x00000003 /* 30-31 Mask on i/f mode bits */
-#define IF_MODE_XGMII		0x00000000 /* 30-31 XGMII (10G) interface */
+#define IF_MODE_10G		0x00000000 /* 30-31 10G interface */
 #define IF_MODE_GMII		0x00000002 /* 30-31 GMII (1G) interface */
 #define IF_MODE_RGMII		0x00000004
 #define IF_MODE_RGMII_AUTO	0x00008000
@@ -440,7 +440,7 @@ static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
 	tmp = 0;
 	switch (phy_if) {
 	case PHY_INTERFACE_MODE_XGMII:
-		tmp |= IF_MODE_XGMII;
+		tmp |= IF_MODE_10G;
 		break;
 	default:
 		tmp |= IF_MODE_GMII;
-- 
2.1.0