* [PATCH net 2/3] bnxt_en: Fix ipv6 RFS filter matching logic.
2020-01-17 5:32 [PATCH net 0/3] bnxt_en: Bug fixes Michael Chan
2020-01-17 5:32 ` [PATCH net 1/3] bnxt_en: Fix NTUPLE firmware command failures Michael Chan
@ 2020-01-17 5:32 ` Michael Chan
2020-01-17 5:32 ` [PATCH net 3/3] bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal Michael Chan
2020-01-18 13:48 ` [PATCH net 0/3] bnxt_en: Bug fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Michael Chan @ 2020-01-17 5:32 UTC (permalink / raw)
To: davem; +Cc: netdev
Fix bnxt_fltr_match() to match ipv6 source and destination addresses.
The function currently only checks ipv4 addresses and will not work
corrently on ipv6 filters.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c779f9c..b441da5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11065,11 +11065,23 @@ static bool bnxt_fltr_match(struct bnxt_ntuple_filter *f1,
struct flow_keys *keys1 = &f1->fkeys;
struct flow_keys *keys2 = &f2->fkeys;
- if (keys1->addrs.v4addrs.src == keys2->addrs.v4addrs.src &&
- keys1->addrs.v4addrs.dst == keys2->addrs.v4addrs.dst &&
- keys1->ports.ports == keys2->ports.ports &&
- keys1->basic.ip_proto == keys2->basic.ip_proto &&
- keys1->basic.n_proto == keys2->basic.n_proto &&
+ if (keys1->basic.n_proto != keys2->basic.n_proto ||
+ keys1->basic.ip_proto != keys2->basic.ip_proto)
+ return false;
+
+ if (keys1->basic.n_proto == htons(ETH_P_IP)) {
+ if (keys1->addrs.v4addrs.src != keys2->addrs.v4addrs.src ||
+ keys1->addrs.v4addrs.dst != keys2->addrs.v4addrs.dst)
+ return false;
+ } else {
+ if (memcmp(&keys1->addrs.v6addrs.src, &keys2->addrs.v6addrs.src,
+ sizeof(keys1->addrs.v6addrs.src)) ||
+ memcmp(&keys1->addrs.v6addrs.dst, &keys2->addrs.v6addrs.dst,
+ sizeof(keys1->addrs.v6addrs.dst)))
+ return false;
+ }
+
+ if (keys1->ports.ports == keys2->ports.ports &&
keys1->control.flags == keys2->control.flags &&
ether_addr_equal(f1->src_mac_addr, f2->src_mac_addr) &&
ether_addr_equal(f1->dst_mac_addr, f2->dst_mac_addr))
--
2.5.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH net 3/3] bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
2020-01-17 5:32 [PATCH net 0/3] bnxt_en: Bug fixes Michael Chan
2020-01-17 5:32 ` [PATCH net 1/3] bnxt_en: Fix NTUPLE firmware command failures Michael Chan
2020-01-17 5:32 ` [PATCH net 2/3] bnxt_en: Fix ipv6 RFS filter matching logic Michael Chan
@ 2020-01-17 5:32 ` Michael Chan
2020-01-18 13:48 ` [PATCH net 0/3] bnxt_en: Bug fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Michael Chan @ 2020-01-17 5:32 UTC (permalink / raw)
To: davem; +Cc: netdev
DSN read can fail, for example on a kdump kernel without PCIe extended
config space support. If DSN read fails, don't set the
BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag
to see if the stored DSN is valid before using it. Only VF reps
creation should fail without valid DSN.
Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe")
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +++----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c | 3 +++
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b441da5..e6f18f6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11373,7 +11373,7 @@ int bnxt_get_port_parent_id(struct net_device *dev,
return -EOPNOTSUPP;
/* The PF and it's VF-reps only support the switchdev framework */
- if (!BNXT_PF(bp))
+ if (!BNXT_PF(bp) || !(bp->flags & BNXT_FLAG_DSN_VALID))
return -EOPNOTSUPP;
ppid->id_len = sizeof(bp->switch_id);
@@ -11746,6 +11746,7 @@ static int bnxt_pcie_dsn_get(struct bnxt *bp, u8 dsn[])
put_unaligned_le32(dw, &dsn[0]);
pci_read_config_dword(pdev, pos + 4, &dw);
put_unaligned_le32(dw, &dsn[4]);
+ bp->flags |= BNXT_FLAG_DSN_VALID;
return 0;
}
@@ -11857,9 +11858,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (BNXT_PF(bp)) {
/* Read the adapter's DSN to use as the eswitch switch_id */
- rc = bnxt_pcie_dsn_get(bp, bp->switch_id);
- if (rc)
- goto init_err_pci_clean;
+ bnxt_pcie_dsn_get(bp, bp->switch_id);
}
/* MTU range: 60 - FW defined max */
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 85af7cf..f143354 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1532,6 +1532,7 @@ struct bnxt {
#define BNXT_FLAG_NO_AGG_RINGS 0x20000
#define BNXT_FLAG_RX_PAGE_MODE 0x40000
#define BNXT_FLAG_MULTI_HOST 0x100000
+ #define BNXT_FLAG_DSN_VALID 0x200000
#define BNXT_FLAG_DOUBLE_DB 0x400000
#define BNXT_FLAG_CHIP_NITRO_A0 0x1000000
#define BNXT_FLAG_DIM 0x2000000
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
index f9bf7d7..b010b34 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
@@ -398,6 +398,9 @@ static int bnxt_vf_reps_create(struct bnxt *bp)
struct net_device *dev;
int rc, i;
+ if (!(bp->flags & BNXT_FLAG_DSN_VALID))
+ return -ENODEV;
+
bp->vf_reps = kcalloc(num_vfs, sizeof(vf_rep), GFP_KERNEL);
if (!bp->vf_reps)
return -ENOMEM;
--
2.5.1
^ permalink raw reply related [flat|nested] 5+ messages in thread