From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH net 3/3] bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
Date: Fri, 17 Jan 2020 00:32:47 -0500 [thread overview]
Message-ID: <1579239167-16362-4-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1579239167-16362-1-git-send-email-michael.chan@broadcom.com>
DSN read can fail, for example on a kdump kernel without PCIe extended
config space support. If DSN read fails, don't set the
BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag
to see if the stored DSN is valid before using it. Only VF reps
creation should fail without valid DSN.
Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe")
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +++----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c | 3 +++
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b441da5..e6f18f6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11373,7 +11373,7 @@ int bnxt_get_port_parent_id(struct net_device *dev,
return -EOPNOTSUPP;
/* The PF and it's VF-reps only support the switchdev framework */
- if (!BNXT_PF(bp))
+ if (!BNXT_PF(bp) || !(bp->flags & BNXT_FLAG_DSN_VALID))
return -EOPNOTSUPP;
ppid->id_len = sizeof(bp->switch_id);
@@ -11746,6 +11746,7 @@ static int bnxt_pcie_dsn_get(struct bnxt *bp, u8 dsn[])
put_unaligned_le32(dw, &dsn[0]);
pci_read_config_dword(pdev, pos + 4, &dw);
put_unaligned_le32(dw, &dsn[4]);
+ bp->flags |= BNXT_FLAG_DSN_VALID;
return 0;
}
@@ -11857,9 +11858,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (BNXT_PF(bp)) {
/* Read the adapter's DSN to use as the eswitch switch_id */
- rc = bnxt_pcie_dsn_get(bp, bp->switch_id);
- if (rc)
- goto init_err_pci_clean;
+ bnxt_pcie_dsn_get(bp, bp->switch_id);
}
/* MTU range: 60 - FW defined max */
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 85af7cf..f143354 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1532,6 +1532,7 @@ struct bnxt {
#define BNXT_FLAG_NO_AGG_RINGS 0x20000
#define BNXT_FLAG_RX_PAGE_MODE 0x40000
#define BNXT_FLAG_MULTI_HOST 0x100000
+ #define BNXT_FLAG_DSN_VALID 0x200000
#define BNXT_FLAG_DOUBLE_DB 0x400000
#define BNXT_FLAG_CHIP_NITRO_A0 0x1000000
#define BNXT_FLAG_DIM 0x2000000
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
index f9bf7d7..b010b34 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
@@ -398,6 +398,9 @@ static int bnxt_vf_reps_create(struct bnxt *bp)
struct net_device *dev;
int rc, i;
+ if (!(bp->flags & BNXT_FLAG_DSN_VALID))
+ return -ENODEV;
+
bp->vf_reps = kcalloc(num_vfs, sizeof(vf_rep), GFP_KERNEL);
if (!bp->vf_reps)
return -ENOMEM;
--
2.5.1
next prev parent reply other threads:[~2020-01-17 5:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-17 5:32 [PATCH net 0/3] bnxt_en: Bug fixes Michael Chan
2020-01-17 5:32 ` [PATCH net 1/3] bnxt_en: Fix NTUPLE firmware command failures Michael Chan
2020-01-17 5:32 ` [PATCH net 2/3] bnxt_en: Fix ipv6 RFS filter matching logic Michael Chan
2020-01-17 5:32 ` Michael Chan [this message]
2020-01-18 13:48 ` [PATCH net 0/3] bnxt_en: Bug fixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1579239167-16362-4-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).