[PATCH RFC v2 17/33] mlx5: rx queue setup time determine frame_sz for XDP

[Jesper Dangaard Brouer <brouer@redhat.com>]

The mlx5 driver have multiple memory models, which are also changed
according to whether a XDP bpf_prog is attached.

The 'rx_striding_rq' setting is adjusted via ethtool priv-flags e.g.:
 # ethtool --set-priv-flags mlx5p2 rx_striding_rq off

On the general case with 4K page_size and regular MTU packet, then
the frame_sz is 2048 and 4096 when XDP is enabled, in both modes.

The info on the given frame size is stored differently depending on the
RQ-mode and encoded in a union in struct mlx5e_rq union wqe/mpwqe.
In rx striding mode rq->mpwqe.log_stride_sz is either 11 or 12, which
corresponds to 2048 or 4096 (MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ).
In non-striding mode (MLX5_WQ_TYPE_CYCLIC) the frag_stride is stored
in rq->wqe.info.arr[0].frag_stride.

To reduce effect on fast-path, this patch determine the frame_sz at
setup time, to avoid determining the memory model runtime.

Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h      |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c  |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c |    4 ++++
 3 files changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 12a61bf82c14..1f280fc142ca 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -651,6 +651,7 @@ struct mlx5e_rq {
 	struct {
 		u16            umem_headroom;
 		u16            headroom;
+		u32            frame_sz;
 		u8             map_dir;   /* dma map direction */
 	} buff;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
index f049e0ac308a..de4ad2c9f49a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
@@ -137,6 +137,7 @@ bool mlx5e_xdp_handle(struct mlx5e_rq *rq, struct mlx5e_dma_info *di,
 	if (xsk)
 		xdp.handle = di->xsk.handle;
 	xdp.rxq = &rq->xdp_rxq;
+	xdp.frame_sz = rq->buff.frame_sz;
 
 	act = bpf_prog_run_xdp(prog, &xdp);
 	if (xsk) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index dd7f338425eb..b9595315c45b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -462,6 +462,8 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c,
 		rq->mpwqe.num_strides =
 			BIT(mlx5e_mpwqe_get_log_num_strides(mdev, params, xsk));
 
+		rq->buff.frame_sz = (1 << rq->mpwqe.log_stride_sz);
+
 		err = mlx5e_create_rq_umr_mkey(mdev, rq);
 		if (err)
 			goto err_rq_wq_destroy;
@@ -485,6 +487,8 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c,
 			num_xsk_frames = wq_sz << rq->wqe.info.log_num_frags;
 
 		rq->wqe.info = rqp->frags_info;
+		rq->buff.frame_sz = rq->wqe.info.arr[0].frag_stride;
+
 		rq->wqe.frags =
 			kvzalloc_node(array_size(sizeof(*rq->wqe.frags),
 					(wq_sz << rq->wqe.info.log_num_frags)),